Category Archives: Health Safety Environmental

Training HSE 2015

INDUSTRIAL POLLUTION CONTROL

TRAINING OBJECTIVES INDUSTRIAL POLLUTION CONTROL

  1. Dapat memahami konsep dasar tentang pengendalian polusi
  2. Dapat menerapkan konsep teknik proteksi bersih ( Cleaner Protection )

 

TRAINING MATERIAL OUTLINE INDUSTRIAL POLLUTION CONTROL

  1. Waste water treatment
  2. Solid wadte treatment
  3. Waste Minimization
  4. Industrial Pollution Prevention
  5. Waste Gas treatment / Recovery Processes
  6. Pollution control in process industries
  7. Modelling Methods for enviromental Engineers
  8. Energy conservation and audit
  9. Cleaner Production
  10. Enviromental Biotechnology: Global Bioconversion
  11. Carbon Dioxite Chemistry : Enviromental Issues
  12. Recovery Processes for Biological Materials
  13. Composting from organic wastes
  14. Design waste water treatment

 

Iklan

LINGKUNGAN KERJA YANG BERSIH DAN AMAN PADA INDUSTRI KIMIA

TRAINING OBJECTIVE LINGKUNGAN KERJA YANG BERSIH DAN AMAN PADA INDUSTRI KIMIA

Program pelatihan ini memberikan gambaran tentang konsep dasar manajemen lingkungan bersih, produksi bersih  dan  tata cara sistem pelaksanaannya khususnya untuk industri kimia. Sehingga setelah mengikuti pelatihan ini peserta mampu mengenal bermacam-macam sistem manajemen bersih di industri kimia, sistem keselamatan kerja serta kendala yang harus dihadapi, dan dapat mengaplikasikan di perusahaan / industri secara tepat, guna mendapatkan efektifitas sistem kerja.

TRAINING MATERIAL OUTLINE LINGKUNGAN KERJA YANG BERSIH DAN AMAN PADA INDUSTRI KIMIA

  1. Kesadaran tentang perlunya kebersihan
  2. Masalah kerja dan kesehatan lingkungan
  3. Pengelolaan lingkungan
  4. House keeping
  5. Konsep dasar manajemen lingkungan bersih
  6. Analisis Dampak Lingkungan
  7. Konsep produksi bersih
  8. Aspek-aspek Keamanan dan Keselamatan kerja
  9. Tindakan darurat kecelakaan kimia
  10. Etiket tanda bahaya zat kimia
  11. Prioritas penyelamatan
  12. Penilaian lingkungan

 

BREATHING ARTS FOR CREATIVE THINKING

LATAR BELAKANG:

Salah satu aspek penting dalam proses dan kesehatan berfikir adalah jaminan suplai oksigen ke dalam otak. Termasuk keseimbangan utilisasi otak kiri dan kanan yang membentuk pola logic dan kreativitas yang melahirkan inovasi berfikir. Fenomena empirik sering melahirkan ide– ide baru yang cemerlang di satu belahan bumi, tapi di belahan bumi lain tidak melahirkan apa – apa sehingga semua zerro value. Padahal dari setiap apa yang kita lihat, kita dengar, dan kita rasakan seharusnya memberi inspirasi bagi proses lahirnya kreativitas dan ide baru yang sangat diperlukan untuk menjamin keberlangsungan suatu perusahaan / lembaga. Ini semua menggambarkan symptom simetrik yang bersifat paradoksial. Dimana rutinitas yang menggenjot pemikiran ekstra keras perlu diimbangi dengan teknik dan metode untuk menjaga stamina otak. Salah satu factor penting di sini adalah pengertian, pemahaman, dan penerapan olah nafas yang baik dan benar guna menunjang tujuan tersebut di atas. Di sinilah peran Breathing Arts menjadi sangat penting dalam mempertahankan sekaligus melahirkan inovasi berfikir yang kreatif dan berkesinambungan.



MANFAAT :

Memahami aspek olah nafas yang baik dan benar, serta melakukan optimalisasi supply oksigen ke dalam otak, yang berfungsi untuk menjaga kelangsungan regenerasi sel – sel otak, dan pada akhirnya kualitas serta stamina otak terjaga, sehingga stamina dan kesehatan kerja karyawan menjadi meningkat. Ini berarti terjadi pengurangan biaya perawatan dan asset pola fikir yang exploratif dan eksponensial.



CAKUPAN MATERI TRAINING :

  1. Filosofi Pernafasan
  2. Organ dan Visualisasi Pernafasan
  3. Interkorelasi Paru – paru dan Jantung
  4. 3 Macam Pernafasan
  • Ø Pernafasan Dada
  • Ø Pernafasan Perut
  • Ø Pernafasan Diafragma
  1. Posisi dan Formasi Nafas
  2. Optimalisasi Supply Oksigen
  3. Kesehatan Otak dan Proses Berfikir

Emergency Response Plan

Deskripsi Training Emergency Response Plan 

Kursus ini menguraikan cara-cara mengembangkan dan mengimplementasikan rencana tanggap darurat. Untuk dapat menangani keadaan darurat ketika akan terjadi. Tujuan dari rencana tanggap darurat yaitu harus siap menghadapi situasi tak terduga seperti kebakaran, tumpahan bahan kimia, ledakan, banjir, cedera, penyakit dan situasi krisis lainnya. Rencana seperti itu sangat penting untuk melindungi kesehatan, kehidupan, properti dan lingkungan. Rencana darurat harus secara khusus disesuaikan dengan tempat kerja. Rencana harus jelas menguraikan prosedur yang harus diikuti dalam keadaan darurat. Pendekatan teratur dan siap untuk menghadapi keadaan darurat dapat mengakibatkan kebingungan, kehilangan nyawa, cedera, kerugian keuangan atau bisnis, dan kerusakan properti.

 

Tujuan Training Emergency Response Plan 

  • Meningkatkan kesadaran peserta akan pentingnya kesigapan perusahaan menghadapi keadaan darurat yang bisa terjadi.
  • Mengkoordinasikan upaya Perencanaan Tanggap Darurat/ ERP sehingga tercapai efisiensi dan efektifitas dalam pengendaliannya.
  • Peserta memahami dengan benar berbagai hal yang terkait dengan ERP sebagai suatu sistem yang selalu dibutuhkan dan diaplikasikan dalam keadaan darurat sehingga pengendalian bisa dilakukan secara cepat dan tepat.
  • Mengetahui apa saja yang bisa terjadi dalam keadaan darurat dan melatih kesiapan mengahadapi keadaan emergency sehingga rasa gugup dan panik dapat diatasi.
  • Mempersiapkan diri dalam mengurangi kemungkinan kerugian yang lebih besar bila dalam keadaan darurat.
  • Mengatur tata cara dalam pelaksanaan penanggulangan Keadaan Darurat sehingga kerugian perusahaan dapat diminimalisir.
  • Peserta Mampu mengembangkan sistem dan program Emergency Response Plan (ERP)
  • Memastikan tindakan pengendalian sesuai Prosedur dan Organisasi Emergency Response Plan (ERP)

Materi Training Emergency Response Plan

1. Introduction to Emergency Response Plan

  • Definisi Darurat dan Bencana
  • Jenis-jenis dari Keadaan Darurat dan Bencana
  • Disaster Management in Indonesia
  • Disaster Management Elements
  • Development of Disaster Management
  • ERP Programs

2. Persiapan dan Perencanaan Tanggap Darurat

  • Pengantar Sistem Manajemen Tanggap Darurat
  • Pembentukan Team Emergency
  • Emergency Organization
  • Struktur Organisasi, Tugas, & Fungsi
  • ERP Programs
  • Prosedur-prosedur dalam Emergency

3. Penanggulangan Ketika terjadinya Emergency

  • Sistem Evakuasi Orang
  • Sistem Evakuasi Peralatan

4. Penanggulangan Pasca Bencana / Emergency

  • Penanganan setelah Terjadinya Bencana / Emergency
  • Medical Emergency

5. Sistem Pelaporan dan Komunikasi

  • Sistem-sistem pelaporan dan Tanggung jawab
  • Jalur-jalur Komunikasi

6. Crisis Management to Improve Emergency Response Plan (ERP) Program Development

7. Simulasi Emergency (Kebakaran, P3K Respon, Evakuasi Korban, Komunikasi)

 

 

Wastewater Treatment Technology (IPAL)

DESKRIPSI IPAL

Pelatihan Wastewater Treatment Technology (IPAL) ditujukan bagi para perencana, pelaksana dan pengawas pekerjaan di lingkungan industri yang wajib menguasasi teknik dan instalasi pengolahan limbah. Dengan metode diskusi kelompok, studi kasus dan studi lapangan yang dibimbing instruktur yang fakar dibidangnya diharapkan setelah selesai mengikuti pelatihan ini dapat menentukan teknik dan instalasi yang tepat untuk diterapkan di lingkungan kerja masing-masing.

 

TUJUAN

Setelah mengikuti training dan workshop ini, maka diharapkan

  1. Memahami prinsip manajemen teknologi limbah industri
  2. Memahami sistem pengolahan limbah cair secara fisika, kimia maupun biologi
  3. Memahami sistem pengolahan limbah gas pada industri petrokimia dan petroleum
  4. Memahami perencanaan dan pengendalian IPAL melalui site visit

 

MATERI TRAINING IPAL

  • Manajemen Teknologi Limbah Industri
  • Sistem Pengolahan Limbah Cair secara fisika
  • Sistem Pengolahan Limbah Cair secara kimia
  • Sistem Pengolahan Limbah Cair secara biologi
  • Sistem Pengolahan Limbah Gas pada industri petrokimia dan petroleum
  • Perencanaan dan Pengendalian IPAL
  • Site Visit dan Studi Kasus Lapangan

 

HIRAC & JSA

INTRODUCTION HIRAC & JSA

Ada dua pendekatan dalam usaha pencegahan dan pengendalian kecelakaan kerja yang dapat dilakukan. Cara pertama dilakukan dengan melakukan investigasi terhadap suatu kecelakaan yang terjadi untuk mencari akar masalahnya (root causes), lalu membuat program untuk mencegah kecelakaan yang sama terulang kembali di masa yang akan datang. Cara ini dikenal dengan pendekatan reaktif. Cara kedua adalah dengan melakukan identifikasi bahaya atau kemungkinan terjadinya sesuatu yang tidak diinginkan, lalu dianalisa dan dievaluasi tingkat resikonya (peluang dan konsekuensinya) untuk menentukan porioritas dan usaha-usaha atau program pencegahaan dan pengendalian kecelakaan yang perlu dilakukan. Cara kedua ini dikenal dengan pendekatan proaktif. Dalam prakteknya kedua pendekatan ini dilakukan secara simultan dan dikenal dengan pendekatan “Trending”.

Pelatihan ini dirancang fokus pada pencegahan dan pengendalian kecelakaan dengan pendekatan kedua. Ada beberapa metode dan alat yang digunakan untuk melakukan penilaian dan pengendalian resiko seperti identifikasi bahaya, penilaian dan pengendalian resiko, HAZOPS, FMEA, Checklist, What If, Fault Tree Analysis, Event Tree Analysis, Cause Consequences Analysis, d+an lain sebagainya. Beberapa metode yang umum digunakan di berbagai perusahaan akan dibahas dalam pelatihan ini termasuk Analisa Keselamatan Kerja di Pekerjaan (JSA).



TRAINING OBJECTIVE HIRAC & JSA

Setelah mengikuti pelatihan ini diharapkan peserta pelatihan dapat :

  1. Peserta diharapkan akan memiliki pengetahuan dan kemampuan untuk memahami dan menerapkan konsep identifikasi bahaya dan risiko K3.
  2. Peserta mampu melakukan analisis bahaya dan penilain risiko ditempat kerja.
  3. Peserta mampu mengembangkan sistem pengendalian bahaya dan risiko di perusahaan.
  4. Peserta memahami Format HIRAC dan JSA
  5. Peserta mampu membendakan antara SOP, JSA dan HIRAC
  6. Peserta mampu membuat JSA pekerjaan diperusahaan masing – masing



TRAINING MATERIAL OUTLINE HIRAC & JSA

  1. Pemahaman Tentang Bahaya
  2. Pemahaman Tentang Risiko
  3. Konsep Kecelakaan Kerja
  4. Konsep HIRAC
  5. Teknik dan Tools Identifikasi Bahaya dan Risiko di Tempat Kerja
  6. HAZOP
  7. FMEA
  8. Checklist
  9. What if
  10. Fault Tree Analysis
  11. Event Tree Analysis
  12. Cause Consequence Analysis
  13. Teknik dan Tools Penilaian Risiko
  14. Mengembangkan Manajemen Kontrol  Risiko di Perusahaan
  15. Latihan dan Kerja Kelompok

JSA:

  1. Pengertian JSA dan SOP
  2. Kriteria Pembuatan JSA
  3. Format JSA
  4. Langkah-langkah pembuatan JSA dan penerapannya.
  5. Latihan dan kerja kelompok

CENTRIFUGAL COMPRESSOR PERFORMANCE & CONDITION EVALUATION

DESKRIPSI

 The degree to which compressor are maintained today ranges from “wait until destruction” to a “complete” but extravagant program. This seminar presents maintenance strategies that are economical and yet assure required compressor availability. Participants review the fundamentals of compressor and the techniques for maintaining them. Participants examine proper methods of parts repair techniques as well as diagnostic tests for identifying and determining problems. Participants will study in depth preventive maintenance programs including the purpose of such programs and their planning and implementation.

 

MATERI TRAINING CENTRIFUGAL COMPRESSOR

  1. Compressor Types
    • Centrifugal
    • Helical screw
    • Reciprocating
    • Application ranges
    • Application ranges
    • Short cut selection methods
  2. Turbo compressor Maintenance
    • Overview of alignment methods
    • Predictive versus preventive strategies
    • Run-length extension surveys
    • Machinery turnaround planning
  3. Reciprocating Compressor Operation
    • Lubrication systems
    • Valves, valve problems and rebuilding
    • Packing and packing problems
    • Controls and cooling systems
  4. Saving Compressor Air Cost While Increasing Efficiency
    • The impact of artificial demand
    • Today’s compressor control
    • Realistic leak management
    • Stabilizing a compressed air system
    • Compressed air dryers
  5. Reciprocating Compressor Preventive Maintenance
    • Types of maintenance programs
    • Purpose of preventive maintenance
    • Inspection and inspection forms
    • Vendor and contractor requirements
    • Planning and implementation
  6. Overhaul and Repair of Reciprocating Compressors
    • Methods of repair and overhaul
    • Alignment and piston rod run out
    • Foundation problems and repair
    • Component repair and rebuilding
  7. Troubleshooting Compressor Problems
    • Basic approaches to compressor troubleshooting
    • Typical problems and solutions
    • Diagnostic test
    • Examples from recent failure incidents

PROCESS SAFETY MANAGEMENT

TRAINING INTRODUCTION PROCESS SAFETY MANAGEMENT

This course provides an in-depth study of each PSM element. cthe implementation phase. This course also covers how to expand your PSM program to include the RBPS (risk-based process safety) elements as proposed by the CCPS (Center for Chemical Process Safety), a division of AIChE (American Institute of Chemical Engineers)

Case Studies – Case studies and exercises are used throughout the course to illustrate interpretations of the requirements and demonstrate ways to develop an effective PSM program, including several video based case studies, including several video-based case studies.



TRAINING OBJECTIVE PROCESS SAFETY MANAGEMENT

In this interactive training, participants will have the opportunity to:

  • To interpret the performance-based requirements of the U.S. OSHA PSM and EPA risk management standards, as well as learn about related industry standards
  • The elements of process safety that are missing from typical PSM systems, including Human Factors elements (communication, human system interface, work environment, staffing, and fitness for duty), Facility Siting element, Project Risk Management, Senior Leadership & Accountability.  The Risk-Based Process Safety (RBPS) guide (2007) from CCPS/AIChE is reviewed so you can understand how to close critical gaps
  • Multiple options for implementing an effective need-specific program
  • Specific guidelines for developing cost effective written programs tailored for each PSM element, whether for a single facility or a corporation
  • How to avoid costly implementation mistakes
  • Jargon for communicating PSM requirements to others throughout the organization
  • For each element
    • How to develop written programs to meet PSM requirements
    • How to incorporate and integrate the PSM element requirements into other corporate programs (other corporate management systems)
    • Key performance indicators
    • How to evaluate program compliance throughout implementation
    • How to begin implementation at your company
    • Additional training necessary for implementation of specific elements
  • The course uses actual and generic case studies
    • To illustrate interpretations of PSM requirements
    • To demonstrate developing an effective PSM program that can be adapted for your facility

 

TRAINING MATERIAL OUTLINE PROCESS SAFETY MANAGEMENT:

Day 1

  1. Introduction to PSM and its origins and goals
  2. Overview of PSM standards and regulations world-wide, definitions, compliance interpretations
  3. Elements of PSM:
  • ­Human error basics
  • ­Elements missing from most PSM systems, including specific human factor aspects, management  commitment & accountability, and project risk management
  • ­Employee participation
  • ­Trade secrets
  • ­Process safety information
  • ­Operating procedures

Day 2

  1. Elements of PSM (continued):
  • ­Hot work permit/safe work
  • ­Training
  • ­Contractors
  • ­Process hazard analysis
  • ­Management of change
  • ­Mechanical integrity
  • ­Pre-startup safety review

Day 3

  1. Elements of PSM (continued):
  • ­Emergency planning and response
  • ­Incident investigation
  • ­Compliance auditing

     2.  Key Performance Indicators, Leading Indicators, and Tracking
3.  Summary of roles and responsibilities
4.  Developing PSM programs, implementation planning
     5.   Course examination (optional)

 

CDM (Clean Development Mechanism) And Project Idea Note

DESKRIPSI

Pelaku industri di Indonesia semakin di buka peluang untuk ikut berpartisipasi di dalam issue global warming melalui program CDM (Clean Development Mechanism). Berawal dari kesepakatan Kyoto Protocol bahwa sebanyak 55 negara maju di dunia sepakat untuk menurunkan GHG (Green House Gases) atau gas rumah kaca sebesar 5% dari tahun 1990 dahulu. Salah satu cara yang di pergunakan adalah melalui program CDM di negara berkembang termasuk di Indonesia.

Banyak industri di Indonesia yang mempunyai peluang besar, misalnya pembangkit listrik, tambang, industri manufacture, industri penerbangan, perkebunan, peternakan, dll dapat menjalankan program CDM ini misalnya dengan mengganti bahan bakar yang lebih ramah lingkungan, memasang anaerobic system di dalam pengolahan limbah, program energy saving dll.. Dari project tersebut PBB lewat badan UNFCCC akan memberikan CER (Certified Emission Reduction) kepada pelaku industri yang di hargai setara dengan sejumlah berat CO2 yang bisa di turunkan. 1 CER = 1 ton CO2 berharga sekitar 5 – 50 USD.

Kondisi saat ini, penurunan GHG dan proyek CDM adalah langkah yang paling baik ditempuh untuk menurunkan biaya operasi dengan cara-cara yang lebih hemat, terukur dan mendukung pembangunan berkelanjutan. Banyak pelaku industri yang sebetulnya sudah dan sedang melakukan aktifitas ini, tetapi karena tidak memahami prosedur claim CDM, maka kesempatan untuk mendapatkan jutaan dolar bisa terbuang percuma.

Training dikemas dengan menarik dengan menghadirkan nara sumber yang sudah berpengalaman dalam dunia industri, mempersiapkan PIN (project idea note) dan mempunyai relasi yang luas terhadap international CDM consultant.

 

TUJUAN

Setelah mengikuti training dan workshop ini, maka diharapkan peserta dapat:

  1. Pengenalan tentang CDM (Clean Development Mechanism)
  2. Peserta bisa mengevaluasi peluang CDM di masing-masing industri
  3. Cara mendapatkan insentive dari progam CDM
  4. Feasibility study sebuah project CDM

 

MATERI TRAINING CDM

  • Prinsip dasar Kyoto Protocol dan Global Warming
  • Prinsip dasar CDM (Clean Development Mechanism)
  • Evaluasi project industri untuk mendapatkan peluang insentive CDM
  • Prosedural untuk program CDM
  • Membuat PIN (Project Idea Note) langkah awal program CDM
  • PIN untuk fuel switching
  • PIN untuk anaerobic system WWT
  • Contoh PDD (project design document)

SMK3

DESKRIPSI SMK3

Bidang keselamatan dan kesehatan tenaga kerja merupakan unsur yang sangat penting yang tidak dapat diabaikan oleh perusahaan. Mengutamakan rasa nyaman dan aman saat bekerja menjadi hak sepenuhnya bagi seorang karyawan terlebih jika mereka bekerja ditingkat resiko kecelakaan yang begitu tinggi. Peraturan Pemerintah (PP) No. 50 Tahun 2012 mengenai penerapan Sistem Manajemen K3 (SMK3). PP No. 50 Tahun 2012 telah ditetapkan pada 12 April 2012 di Jakarta. PP tersebut merupakan peraturan pelaksanaan dari pasal 87 UU No. 13 Tahun 2003 tentang Ketenagakerjaan. Dalam PP Nomor 50 Tahun 2012 tersebut, semua pemberi kerja wajib melaksanakan SMK3, terutama perusahaan yang mempekerjakan minimal 100 tenaga kerja atau perusahaan yang memiliki tingkat potensi kecelakaan yang tinggi akibat karakteristik proses kerja. Training ini akan membahas tentang penerapan sistem manajemen K3 di perusahaan yaitu antara lain tentang bagaimana memahami metoda identifikasi dan pengkajian resiko bahaya K3. Proses penyusunan tujuan, sasaran dan program K3, melakukan gap analysis penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di perusahaan, menyusun sistem dokumentasi K3: Prosedur / SOP dan Instruksi Kerja, menyediakan, mengimplementasikan dan memelihara Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3).

TUJUAN TRAINING SMK3

Peserta memahami sistem SMK3 dan mampu untuk merencanakan, mengimplementasikan dan mengevaluasi sistem SMK3 di perusahaan.

MATERI TRAINING SMK3

  1.  Ruang lingkup Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3)
  2.  Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) berdasarkan PP No.50 tahun 2012 dan OHSAS 18001:2007
  3. Metoda identifikasi dan pengkajian resiko bahaya k3
  4. Proses Penyusunan Tujuan, Sasaran dan program K3
  5. Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di perusahaan
  6. Dokumentasi K3: Prosedur atau SOP dan Instruksi Kerja
  7. Pemeliharaan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3)

K3 DAN ERGONOMI DI RUMAH SAKIT

DESKRIPSI TRAINING K3 DAN ERGONOMI DI RUMAH SAKIT

Dengan diterbitkannya    Peraturan Menteri Tenaga Kerja nomor : PER.05/MEN/1996, tentang Sistem Keselamatan & Kesehatan Kerja (SMK3) diharapkan perusahaan dapat mengimplementasikan  system keselamatan dan kesehatan kerja sehingga karyawan terlindungi, tingkat kecelakaan dapat diturunkan dan peluang terjadinya   bahaya dan kecelakaan di tempat kerja  dapat dihindari. Sebagimana diatur dalam  pasal 3 Peraturan Menteri tersebut bahwa setiap perusahaan yang memperkerjakan tenaga kerja sebanyak 100 orang atau lebih, dan/atau mengandung potensi bahaya yang ditimbulkan oleh karakteristik proses atau bahan produksi yang dapat menyebabkan kecelakaan kerja seperti peledakan, kebakaran, pencemaran dan penyakit akibat kerja, wajib mengimplementasikan SMK3. Demikian pula penanganan faktor potensi berbahaya yang ada di rumah sakit serta metode pengembangan program keselamatan dan kesehatan kerja disana perlu dilaksanakan, seperti misalnya perlindungan baik terhadap penyakit infeksi maupun non-infeksi, penanganan limbah medis, penggunaan alat pelindung diri dan lain sebagainya. Selain terhadap pekerja di fasilitas medis/klinik maupun rumah sakit, Keselamatan dan Kesehatan Kerja di rumah sakit juga “concern” keselamatan dan hak-hak pasien, yang masuk kedalam program patient safety.Oleh karena itu perlu adanya pemahaman kepada semua karyawan di rumah sakit tentang pentingnya penerapan SMK3 di rumahsakit.



TUJUAN TRAINING K3 DAN ERGONOMI DI RUMAH SAKIT

Setelah mengikuti pelatihan ini diharapkan peserta memahami tentang system dan aplikasi dari smk3 di rumah sakit.



MATERI TRAINING K3 DAN ERGONOMI DI RUMAH SAKIT

1. Identifikasi dan evaluasi terhadap faktor yang berpotensi berbahaya bekerja di rumah sakit (faktor fisik, kimia dan biologis)

2. Kontrol terhadap faktor risiko terhadap keselamatan dan kesehatan kerja, seperti :

  • Faktor Fisik (radiasi, bising, suhu panas, dan sebagainya)
  • Faktor Kimiawi (laboratorium, penggunaan mesin fotocopy, MSDS, Label, dsb)
  • Faktor Ergonomi (menghindarkan terjadinya penyakit otot rangka)
  • Faktor Biologis (kuman, virus, infeksi atau bloodborne pathogen, dan sebagainya)
  • Faktor Psikososial (stress kerja, kerja shhift, dsb)
  • Faktor lainnya, seperti :
    • Bahaya kebakaran.
    • Gas bertekanan tinggi (Compressed Gases)
    • Bahan-bahan yang mudah terbakar (cair, gas) dan penyimpanannya
    • Listrik
  • Faktor bahaya spesifik menurut Bagian/Departemen
  • Health and Safety di Laboratorium
  • Penanganan Limbah medis (infectious/non-infectious dan cair/padat
  • Pengenalan Alat Pelindung Diri
  • Kontrol terhadap infeksi nosokomial serta patient safety.

3. Peraturan Perundangan yang terkait, pentingnya Panitia Pembina Keselamatan dan Kesehatan serta tugas dan fungsinya.

    4. Ergonomi dan keselamatan kerja di rumah sakit. Pengenalan Ergonomi

  • Ergonomi dan Perancangan Sistem Kerja
  • Anthropometri
  • Fisiologi Kerja
  • Biomekanika
  • Sensasi yang dialami manusia saat bekerja
  • Perancangan Lingkungan Kerja
  • Psikologi Kerja
  • Human Error
  • Studi Kasus

ACCIDENT INVESTIGATION

ABSTRACK TRAINING ACCIDENT INVESTIGATION

Telah disadari oleh jajaran manajemen bahwa kecelakaan akan menyebabkan kerugian atau akan bisa mengurangi keuntungan perusahaan, tetapi masih banyak yang belum mau melakukan tindakan penanggulangan dengan baik dan serius. Padahal kecelakaan sering terjadi ditempat kerja, bahkan terkadang kecelakaan yang sama terulang kembali untuk yang kesekian kalinya, tanpa ada upaya penanggulangan sedikitpun. Keuntungan perusahaanpun akan berkurang dan seterusnya.
Salah satu upaya mengurangi kerugian akibat kecelakaan adalah dengan mengadakan analisa setiap kecelakaan yang terjadi dan melakukan tindakan perbaikan agar kecelakaan serupa tidak akan pernah terjadi kembali. Hasil analisa kecelakaan yang baik dan tepat serta diterapkan upaya tindak pencegahannya akan bisa meningkatkan kesadaran keselamatan bagi semua karyawan dan kerugian akibat kecelakaanpun akan berkurang. Bagaimana cara praktisnya agar didapatkan ketepatan dalam menganalisa, diperlukan langkah dan tahapan serta pengetahuan yang lebih mendalam. Karena itulah pelatihan Investigasi Kecelakaan ini diselenggarakan.


OUTLINE TRAINING ACCIDENT INVESTIGATION

  • Pengertian kecelakaan, sebab dan dampaknya.
  • Kenapa kecelakaan perlu dianalisa.
  • Langkah-langkah dalam mengadakan penyelidikan kecelakaan.
  • Beberapa “Tools” yang biasa digunakan untuk menganalisa kejadian kecelakaan.
  • Beberapa kondisi berbahaya yang umumnya berpotensi sebagai penyebab kecelakaan.

MODERN SAFETY AND LOSS CONTROL MANAGEMENT

TRAINING INTRODUCTION MODERN SAFETY AND LOSS CONTROL MANAGEMENT

Some managers do not understand how much accidents and other loss-producing events really cost. Wearing the blinders of traditional thinking in the area of accidents, they are likely to see only the  costs of medical treatment and workers compensation. What is worse, they may accept these as the envitable costs of “doing business”, or assume that accident costs are borne by the insurance carrier. Even fewer managers understand that the same factors which are  creating understand are also creating production losses as well as quality and cost problems. To understand the modern safety and loss control management is to take the significant steps in the identification, assessment  and control of all losses.

TRAINING OBJECTIVES MODERN SAFETY AND LOSS CONTROL MANAGEMENT

After attending this course, the course participants will be able to :

  1. Understand the Republic Indonesia / Government  & International Safety Regulations
  2. Implement modern safety and loss control management principles .
  3. Analyze the real causes , cost of accidents and other losses, and a functional framework for analyzing their sources and controlling their effects.
  4. Conduct professional  management approach to provide operational strategies for improving overall management.



TRAINING MATERIAL OUTLINE MODERN SAFETY AND LOSS CONTROL MANAGEMENT

  1. Introduction to R.I. Government and International Safety Regulations.
  2. The Modern Evolution of Safety Management
  3. The Causes and Effects of Loss
  4. Management Control of Loss
  5. Planned Inspections
  6. Personal and Group Communications
  7. Leadership and Employee Training
  8. Principles of Occupational Health
  9. Fire Loss Prevention and Control
  10. Principles of Accident/Incident Investigation
  11. Property Damage and Waste Control
  12. Case Study, Group Discussions and Presentations, Safety Film/VCD Shows
  13. Pre-Test, Post-Test and Course Evaluation

ONSHORE DRILLING SAFETY OPERATIONS

TRAINING INTRODUCTION ONSHORE DRILLING SAFETY OPERATIONS

Operasi pemboran didarat (onshore) banyak sekali mengandung bahaya dan risiko, baik terhadap kesehatan (Health), keselamatan kerja (Safety) dan lingkungan (Environment) atau K3L / HSE, dimana yang akan terkena dampak  bahaya dan risiko tersebut adalah tenaga kerja / manusia (People), perlengkapan / peralatan {Equipment / Tools), bahan-bahan (Materials) dan lingkungan hidup disekitar operasi pemboran darat. Standar K3L / HSE yang tinggi dalam operasi pemboran akan tercapai bila tenaga kerja / karyawannya terlatih, baik dalam masalah operasi pemboran maupun dalam aspek-aspek K3L / HSE. Selain itu yang tidak kalah pentingnya tentu saja perlengkapan / peralatan yang dipakai harus memenuhi standar operasi yang dirancang dan disusun dengan baik, dioperasikan dengan program pemboran yang memperhatikan aspek-aspek engineering / rekayasa yang baik pula. Faktor utama dalam operasi pemboran yang sehat, aman dan bersahabat dengan lingkungan adalah perencanaan yang tepat dan komunikasi yang baik antar karyawan mulai dari Rig Manager sampai dengan Roustabout dan pihak-pihak lainnya yang terlibat dalam operasi pemboran.



TRAINING OBJECTIVES ONSHORE DRILLING SAFETY OPERATIONS

Setelah mengikuti training ini, maka peserta training diharapkan dapat :

  1. Mengetahui, mengerti dan melaksanakan Undang-Undang, Peraturan-Peraturan dan Prosedur-Prosedur dari Pemerintah Republik Indonesia tentang K3L / HSE yang ada kaitannya dengan operasi pemboran didarat maupun K3L / HSE secara umum dalam Eksplorasi dan Produksi (EP) minyak , gas bumi dan panas bumi.
  2. Merencanakan (Planning), mengorganisir (Organizing), melaksanakan (Actuating) dan mengendalikan (Controlling) operasi pemboran didarat agar lancar, sehat, aman / selamat sehingga tidak mengakibatkan terhentinya / terganggunya operasi pemboran, tidak mengakibatkan penyakit akibat kerja, tidak menimbulkan kecelakaan, kebakaran dan pencemaran lingkungan.



TRAINING MATERIAL OUTLINE ONSHORE DRILLING SAFETY OPERATIONS

  1. Pengenalan tentang Undang-Undang / Peraturan-Peraturan Pemerintah Republik Indonesia yang terkait dengan Operasi Pemboran Minyak & Gas Bumi serta Panas Bumi didarat, antara lain :
    • a.    Undang-Undang No. 1 Tahun 1970 tentang Keselamatan Kerja
    • b.    Mijn Politie Reglement / Peraturan Kepolisian Pertambangan Lembaran Negara 1930 No. 341
    • c.    Pedoman-Pedoman Pelaksanaan Operasi Pemboran Darat dari Direktorat Jendral Minyak dan Gas Bumi (MIGAS)
    • d.    Undang-Undang & Peraturan-Peraturan lainnya yang terkait operasi pemboran migas dan panas bumi.
  2. Pengenalan tentang Manajemen Pengendalian Rugi (Loss Control Management)
  3. Alat-Alat Pelindung Diri Pada Operasi Pemboran Didarat
  4. Aspek-Aspek K3L / HSE Pada Penyiapan Lokasi Pemboran Didarat
  5. Aspek-Aspek Safety Pada Peralatan Pemboran Didarat yang meliputi antara lain :
    • a.    Hoisting System (Derrick / Mast, Substructure, Rig Floor, Drawworks, Crown Block, Traveling Block, Hook, Elevators, Drilling Line)
    • b.    Rotating System (Rotary Table, Master Bushing, Kelly Bushing, Rotary Slips, Make-Up & Break-Out Tongs, Swivel, Kelly, Kelly Saver Sub, Drill Pipe, Drill Collar, Specialized Down Hole Tools, Bit)
    • c.    Circulating System (Drilling Fluid / Mud, Mud House, Steel Mud Pits /Tanks, Mixing Hopper, Chemical Mixing Barrel, Bulk Mud Storage Bins, Water Tank, Reserve Pits, Discharge & Return Lines, Stangpd Pipe, Rotary Hose, Mud Pumps, Special Pumps & Agitators, Settling Tanks, Mud-Gas Separator, Shale-Shaker, Degasser, Desander, Desilter)
    • d.    Blowout Prevention System (Accumulator, BOP Stack, Choke Manifold, Kill Line)
    • e.    Power System (Prime Movers, Power Transmission System
    • f.    Support Equipment seperti Crane, Dozer, Forklift, Backhoe, Excavator, Vacuum Truck dan Alat-Alat Transport  lainnya
  6. Audit / Inpeksi K3L atau HSE  Pada Operasi Pemboran Didarat
  7. Sistem Izin Kerja (Permit to Work System) Pada Operasi Pemboran Didarat
  8. Pencegahan, Pemadaman dan Pengendalian Kebakaran Pada Operasi Pemboran Didarat
  9. Review Kecelakaan-Kecelakaan Nyata (Blowout, Kebakaran, dll) Pada Operasi Pemboran Didarat
  10. Penanganan Bahan-Bahan Kimia Berbahaya Dalam Operasi Pemboran Didarat
  11. Studi-Studi Kasus Menganalisa Hasil-Hasil Inspeksi Peralatan Pemboran Didarat

K3 Teknisi Perancah

Tujuan  & Manfaat

Pelatihan K3 Teknisi Perancah ini dirancang untuk memenuhi UU no. 1 tahun 1970 tentang Keselamatan Kerja,  peraturang Menteri Tenaga Kerja no. PER. 01/MEN/1980 tentang Keselamatan & Kesehatan  Kerja pada Konstruksi Bangunan dan SKB Menteri Tenaga Kerja dan Menteri Pekerjaan Umum no. Kep 174/Men/1986 dan no. 104/Kpts/1986 dan pedoman pelaksanaan tentang keselamatan dan kesehatan kerja pada tempat kegiatan konstruksi.

Selain untuk memenuhi peraturan pemerintah, Pelatihan ini dirancang agar para peserta memperoleh pengetahuan dan ketrampilan dasar yang dibutuhkan dalam hal merencanakan, mempersiapkan, menyelesaikan dan mengawasi serta memastikan pekerjaan scaffolding dengan aman



Materi Pelatihan K3 Teknisi Perancah

  1. Peraturan perundangan K3  konstruksi bangunan
  2. Pengetahuan dasar perancah
  3. Jenis – jenis perancah
  4. Standar dan pedoman teknis perancah
  5. Supervisi dan pemeriksaan perancah
  6. Dasar- dasar penilaian beban perancah
  7. Melaksanakan dasar – dasar
  8. Potensi bahaya konstruksi perancah
  9. Cara pencegahan kecelakaan kerja perancah
  10. Prosedur kerja aman perancah (bekerja di ketinggian)
  11. Praktek

BASIC SAFETY OFFICER

DESKRIPSI TRAINING BASIC SAFETY OFFICER

          Banyak kecelakaan yang sebenarnya tidak perlu terjadi, tetapi bisa terjadi dan sangat merugikan. Karena itu diperlukan pengetahuan untuk mencegahnya agar kerugian dapat dihindarkan. Semua kecelakaan yang pernah terjadi ada sebabnya, semua sebab bisa dicari dan diketahui, karena itu semua sebab kecelakaan dapat dihindari sehingga semua kecelakaan bisa ditiadakan, sampai tercapai bebas kecelakaan. Salah satu cara mencegah Kecelakaan Kerja yaitu dengan menerapkan kaidah-kaidah Keselamatan dan Kesehatan Kerja di tempat kerja, yang harus dipatuhi oleh semua karyawan.

Manfaat Basic Safety Officer Training

  1. Meningkatkan kesadaran peserta terhadap pentingnya tindak pencegahan kecelakaan dan menggugahnya untuk mendorong karyawan dilingkungan kerjanya agar mau melakukan tindakan pencegahan kecelakaan.
  2. Meningkatkan pengetahuan peserta akan upaya pencegahan kecelakaan dilingkungan kerjanya.
  3. Meningkatkan moral Perusahaan dan karyawan serta mengurangi resiko kerugian bagi Perusahaan.

MATERI TRAINING BASIC SAFETY OFFICER

  1. Occupational Health & Safety Foundations
  2. Reasons for having Occupational Health & Safety (OHS) in the Company
  3. Hazards Identification, Risk Assessment & Risk Control
  4. Emergency Response
  5. Permit to Work System
  6. Job Safety Analysis
  7. Occupational Health & Safety Programs
  8. Occupational Health & Safety Management System

K3 Teknisi Perancah

Tujuan  & Manfaat

Pelatihan K3 Teknisi Perancah ini dirancang untuk memenuhi UU no. 1 tahun 1970 tentang Keselamatan Kerja,  peraturang Menteri Tenaga Kerja no. PER. 01/MEN/1980 tentang Keselamatan & Kesehatan  Kerja pada Konstruksi Bangunan dan SKB Menteri Tenaga Kerja dan Menteri Pekerjaan Umum no. Kep 174/Men/1986 dan no. 104/Kpts/1986 dan pedoman pelaksanaan tentang keselamatan dan kesehatan kerja pada tempat kegiatan konstruksi.

Selain untuk memenuhi peraturan pemerintah, Pelatihan ini dirancang agar para peserta memperoleh pengetahuan dan ketrampilan dasar yang dibutuhkan dalam hal merencanakan, mempersiapkan, menyelesaikan dan mengawasi serta memastikan pekerjaan scaffolding dengan aman



Materi Pelatihan K3 Teknisi Perancah

  1. Peraturan perundangan K3  konstruksi bangunan
  2. Pengetahuan dasar perancah
  3. Jenis – jenis perancah
  4. Standar dan pedoman teknis perancah
  5. Supervisi dan pemeriksaan perancah
  6. Dasar- dasar penilaian beban perancah
  7. Melaksanakan dasar – dasar
  8. Potensi bahaya konstruksi perancah
  9. Cara pencegahan kecelakaan kerja perancah
  10. Prosedur kerja aman perancah (bekerja di ketinggian)
  11. Praktek

Supervisi Perancah : Pelatihan & Sertifikasi K3

Tujuan & Manfaat Pelatihan K3 Supervisi Perancah

Pelatihan ini dirancang untuk memenuhi UU no. 1 tahun 1970 tentang Keselamatan Kerja, peraturang Menteri Tenaga Kerja no. PER. 01/MEN/1980 tentang Keselamatan & Kesehatan Kerja pada Konstruksi Bangunan dan SKB Menteri Tenaga Kerja dan Menteri Pekerjaan Umum no. Kep 174/Men/1986 dan no. 104/Kpts/1986 dan pedoman pelaksanaan tentang keselamatan dan kesehatan kerja pada tempat kegiatan konstruksi.

Selain untuk memenuhi peraturan pemerintah, Pelatihan ini dirancang agar para peserta memperoleh pengetahuan dan ketrampilan dasar yang dibutuhkan dalam hal merencanakan, mempersiapkan, menyelesaikan, mengecek dan mengawasi serta memastikan pekerjaan scaffolding dengan aman



Materi Pelatihan Pelatihan K3 Supervisi Perancah

  • Peraturan perundangan K3 konstruksi bangunan
  • Pengetahuan dasar perancah
  • Jenis – jenis perancah
  • Standar dan pedoman teknis perancah
  • Supervisi dan pemeriksaan perancah
  • Dasar- dasar penilaian beban perancah
  • Perencanaan struktur perancah
  • Pengelolaan persyaratan pengadaan perancah
  • Pengelolaan pelaksanaan perancah
  • Dasar-dasar perhitungan konstruksi perancah
  • Potensi bahaya konstruksi perancah
  • Cara pencegahan kecelakaan kerja perancah
  • Prosedur kerja aman perancah (bekerja di ketinggian)
  • Praktek

K3 PERTAMBANGAN

PENGANTAR TRAINING K3 PERTAMBANGAN

Kegiatan atau aktivitas dalam industri pertambangan tidak bisa pungkiri adanya risiko terjadinya kecelakaan kerja, karena didalam aktivitasnya pertambangan menggunakan padat modal dan padat teknologi.  Dengan kesadaran akan terjadinya kecelakaan kerja tersebut industri pertambangan menyiapkan tenaga ahli k3 yang bertanggung jawab atas keselamatan para pekerjanya. Pada prinsipnya kecelakaan kerja dapat terjadi dikarenakan oleh kondisi yang tidak aman serta kegiatan atau aktivitas yang tidak aman.



TUJUAN PELATIHAN

 Setelah mengikuti pelatihan ini peserta di harapkan dapat memahami aspek keselamatan dan kesehatan pada Industri pertambangan sehingga dapat menerapkannya di dalam pekerjaannya

MATERI PELATIHAN K3 PERTAMBANGAN

  • Ruang Lingkup Manajemen Keselamatan dan Kesehatan (K3) dalam industri Pertambangan
  • Dasar Hukum K-3 Pertambangan
    1. UU Nomor 11 TH 1967
    2. UU Nomor 1 TH 1970
    3. UU Nomor 13 TH 2003
    4. PP Nomor 32 TH 1969
    5. PP Nomor 19 TH 197
    6. MPR Nomor 341 LN 1930
    7. KEPMEN Nomor 2555.K/201/M.PE/1993
    8. KEPMEN Nomor 555.K/26/M.PE/1995
  • Elemen Pemerintah dalam pengelolaan K3 pertambangan
  • Elemen Perusahaan dalam pengelolaan K3 pertambangan
  • Pengawasan Pertambangan
  • Pengawasan K3 dan Keselamatan Operasi Pertambangan
  1. Keselamatan Kerja
  2. Kesehatan Kerja
  3. Lingkungan Kerja
  4. Sistem Manajemen K3
  5. Kelayakan Sarana, Prasarana dan Instalasi Peralatan Pertambangan
  6. Kompetensi Tenaga Teknik
  • Ruang Lingkup Pengawasan operasional / lapangan
  • Pengujian Peralatan Sarana dan instalasi
  • Pengujian/Penilaian Kompetensi
  • Pembinaan K3 dan Keselamatan Operasi Pertambangan
  • Sistem Manajemen K3
  • Risiko dan Kerugian Akibat Terhentinya Operasional
  • Case and Study

BASIC HSE FOR OIL AND GAS

DESKRIPSI TRAINING BASIC HSE FOR OIL AND GAS

Sebagai tempat yang memiliki resiko tinggi dalam menjalankan operasinya, perusahaan yang bergerak dalam pertambangan minyak dan gas telah seharusnya memperhatikan secara detail aspek kesehatan dan keselamatan karyawan, terutamanya karyawan kontraktor yang bekerja di bagian operasional produksi. Terjadinya kecelakaan selain secara pasti merugikan perusahaan dalam bidang keuangan dan produktivitas, hal tersebut juga dapat menurunkan reputasi yang berakibat pada kepercayaan masyarakat dan pemerintah dalam menjalankan izin penambangan. Oleh sebab itu, perusahaan memerlukan sistem manajemen terpadu yang dapat meningkatkan efektivitas perlindungan keselamatan dan kesehatan pekerja secara terencana dan terevaluasi. Dengan optimalisasi fungsi health, safety & environment (HSE) pada perusahaan, pada akhirnya pekerja dapat merasakan suasana dan iklim kerja yang nyaman, aman dan efesien yang dapat menguntungkan perusahaan karena meningkatkanya daya produktivitas karyawannya. Training ini akan memberikan pengetahuan dan pengalaman yang secara mendasar diperlukan untuk menyiapkan sistem HSE yang efektif di perusahaan pertambangan minyak dan gas (HSE FOR OIL AND GAS).

TUJUAN TRAINING BASIC HSE FOR OIL AND GAS

Setelah mengikuti training ini diharapkan peserta dapat :

  1. Memahami dalam mengelola dan mengefektifkan sistem manajemen HSE di pertambangan minyak dan gas  (HSE FOR OIL AND GAS)
  2. Lebih terampil dalam memecahkan persoalan dan perencanaan dalam bidang HSE

 

MATERI TRAINING BASIC HSE FOR OIL AND GAS

  1. Ruang lingkup, peran, dan manfaat pengelolaan sistem manajemen HSE
  2. Identifikasi potensi bahaya dan resiko di perusahaan pertambangan minyak dan gas
  3. Standar penerapan sistem manajemen HSE (Regulasi pemerintah, OHSAS 18001)
  4. Perencanaan dan sosialisasi program HSE kepada karyawan
  5. Sistem kendali mutu HSE yang efektif
  6. Pelaporan dan investigasi
  7. Membangun emergency respon system dalam mitigasi HSE
  8. Studi kasus implementasi HSE di perusahaan

K3 KONSTRUKSI

DESKRIPSI TRAINING K3 KONSTRUKSI

Pekerjaan konstruksi merupakan salah satu bidang pekerjaan dengan potensi bahaya cukup besar. Beberapa kecelakaan sering kita dengar seperti runtuhnya pekerjaan atap, tertimbun longsoran galian, jatuh dari ketinggian, terluka akibat alat-alat kerja, dll yang mengakibatkan baik luka-luka maupun korban jiwa. Untuk mengantisipasi masalah tersebut pemerintah sekarang mendorong diberlakukannya sistem manajemen K3 dalam penyelenggaraan proyek. Undang-Undang Jasa Konstruksi nomor 18 tahun 1999 mengamanatkan bahwa setiap penyelenggaraan pekerjaan konstruksi harus memenuhi ketentuan keselamatan dan kesehatan kerja.

Selain disyaratkan, K3 seharusnya juga merupakan kebutuhan perusahaan bahkan tiap individu yang bekerja atau terlibat dalam proyek, karena pada hakekatnya tiap orang yang bekerja ingin kesehatan dan keselamatannya terjamin. Banyak Owner proyek sekarang juga menghargai K3, dimana mereka lebih memilih penyedia jasa yang mengimplementasikan K3 meskipun dengan penawaran yang sedikit lebih mahal. Terjadinya kecelakaan kerja tidak diinginkan oleh semua pihak, karena dapat menimbulkan penderitaan, kerugian keuangan yang tidak sedikit, imej dan reputasi.



TUJUAN TRAINING K3 KONSTRUKSI

Setelah mengikuti training k3 konstruksi ini, peserta akan memahami bahaya-bahaya pada proyek konstruksi, peraturan-peraturan yang mensyaratkan K3, bagaimana menyusun program sistem manajemen K3, kendala-kendala yang dihadapai dalam implementasi dan solusinya. Meskipun training ini ditujukan untuk proyek konstruksi, namun manfaatnya dapat lebih luas, yaitu untuk menumbuhkan kesadaran akan pentingnya K3 untuk kehidupan sehari-hari. Karena pada hakekatnya bahaya ada dimana-mana di sekitar kita dan keselamatan dan kesehatan merupakan salah satu kebutuhan utama dalam meningkatkan kualitas hidup.



MATERI  TRAINING K3 KONSTRUKSI

  1. Peraturan-Peraturan / Dasar Hukum Penyelenggaraan K3
  2. Potensi Bahaya Pada Pekerjaan Konstruksi
  3. Sistem Manajemen K3/ OHSAS 18001:2007
  4. Merencanakan program K3
  5. Sosialiasi Ahli Manajemen K3 bidang Konstruksi.
  6. Implementasi dan Sertifikasi SMK3

Audit Integrasi Sistem Manajemen ISO 9001: 2000, ISO-140001: 2004 dan SMK3 / OHSAS-18001

DESKRIPSI

Bagi Dunia usaha yang sudah mulai menerapkan Sistem Manajemen ISO-9001:2000, Sistem Manajemen Lingkungan ISO-14001:2004, Sistem Manajemen Kesehatan & Keselamatan Kerja (SMK3) / OHSAS-18001 dan melaksanakan Integrasi system tersebut merasakan lebih efisien serta pelaksanaan operasional menjadi lebih efektif.
Salah satu yang efektif dalam pelaksanaan Integrasi system tersebut adalah melaksanakan Audit yang sudah terintegrasi. Sehingga para Staf/Tim yang bertugas melaksanakan proses Integrasi di Perusahaan perlu diberikan bekal memahami Audit Integrasi.

Workshop Audit Integrasi akan membekali para Tim Auditor Internal dengan pengetahuan dan keterampilan merencanakan, melaksanakan dan mengendalikan audit integrasi sistem manajemen mutu, lingkungan dan keselamatan kerja secara lebih baik sehingga para Auditor Internal dapat memainkan perannya secara efektif dan kreatif untuk meningkatkan kinerja sistem manajemen mutu, lingkungan dan keselamatan kerja perusahaan secara maksimal melalui fungsi pemeriksaan

 

TUJUAN

Setelah mengikuti training dan workshop ini, maka diharapkan peserta dapat:

  1. Memberikan pemahaman Tugas dan Tanggung Jawab Audit Internal
  2. Memberikan metode membuat jadwal Audit Integrasi
  3. Memahami cara membuat Check list Audit Integrasi dan cara menentukan perencanaan Audit Integrasi dan format – formatnya
  4. Mengetahui pengalaman perusahaan yang sudah melaksanakan Audit Integrasi

 

MATERI AUDIT INTEGRASI SISTEM MANAJEMEN ISO 9001 

  • Pendahuluan mengenai konsep dasar, filosofi, dan prinsip integrasi dari ISO 9001:2000, ISO 14001:2004, dan OHSAS 18001:2007 serta siklus PDCA.
  • Pengenalan integrasi ISO 9001:2000, ISO 14001:2004, dan OHSAS 18001:2007.
  • Dokumentasi integrasi ISO 9001:2000, ISO 14001:2004, dan OHSAS 18001:2007, contoh dari berbagai dokumennya, dan disertai dengan workshop pembuatannya (termasuk teknik identifikasi aspek dan dampak lingkungan serta teknik identifikasi bahaya dan penilaian resikonya beserta program penanganannya).
  • Audit internal untuk integrasi ISO 9001:2000, ISO 14001:2004, dan OHSAS 18001:2007 berdasarkan standar ISO 19011Pemahaman persyaratan Standar Sistem Manajemen ISO-9001:2000, ISO-14001:2004 dan OHSAS-18001:2007.
  • Definisi jenis Audit dan sasaran Audit – Kompetensi Auditor dan Lead Auditor
  • Evaluasi performa Auditor
  • Tugas dan tanggung jawab Tim Audit Internal
  • Metode pembuatan jadwal Audit Integrasi dan penunjukan Tim Audit Internal
  • Cara membuat chek list Audit Integrasi.

Manajemen Keselamatan Gudang (Warehouse Safety Management)

Deskripsi Training Manajemen Keselamatan Gudang

Gudang (warehouse) merupakan salah satu elemen vital yang dimiliki oleh perusahaan. Di dalam gudang terdapat berbagai macam aset perusahaan, baik berupa raw material, barang setengah jadi (work in process), barang jadi (finished good), spare part, bahan-bahan kimia, yang semua itu perlu dijaga dengan baik agar produktivitas perusahaan tetap maksimal. Salah satu hal yang perlu diperhatikan adalah mengenai keselamatan dan kesehatan kerja di pergudangan agar dapat mencegah dan mengurangi kerugian bagi perusahaan dari berbagai aspek (biaya, waktu, kepercayaan, produktivitas). Terlebih proses kerja di gudang memiliki resiko keselamatan yang tidak sedikit, sehingga setiap fungsi bisnis di perusahaan perlu untuk memberikan perhatian khusus pada penanganan dan manajemen keselamatan gudang ini.

Tujuan Training Manajemen Keselamatan Gudang

  1. Memberikan pelatihan untuk memanage gudang dalam bingkai kesehatan dan keselamatan kerja (K3) yang dapat meningkatkan produktivitas perusahaan
  2. Mengetahui potensi dari kecelakaan kerja yang dapat muncul di pergudangan (warehouse)
  3. Mengetahui strategi teknis dalam menghindari setiap potensi kecelakaan yang mungkin terjadi di pergudangan
  4. Mampu merancang pergudangan yang aman, ergonomis dan nyaman untuk dapat meningkatkan keselamatan kerja di pergudangan
  5. Memberikan kecakapan menyeleseikan persoalan (problem solving skill) dengan memberikan studi kasus yang harus dipecahkan oleh peserta dengan kreatif

 

Materi Training Manajemen Keselamatan Gudang

1. Ruang lingkup manajemen keselamatan kerja di pergudangan

  •  Dasar hukum kesehatan dan keselamatan kerja
  • Urgensi manajemen keselamatan (safety management) di pergudangan
  • Akibat sistemik dari kelalaian manajemen keselamatan
  • Penerapkan K3 yang terstandar di pergudangan

2. Pelatihan identifikasi potensi kecelakaan kerja beserta dengan pembuatan alternatif penyelesaian persoalan
3. Evaluasi bentuk penyimpanan dan gudang yang minim resiko kecelakaan kerja

  • Meminimalisir terjadinya kebakaran di tempat kerja
  •  Mengurangi bahaya listrik di pergudangan
  • Cara kerja penumpukan yang aman
  • Penyimpanan dengan tepat

4. Penyusunan Material Safety Data Sheet (MSDS) di pergudangan
5. Mobile crane and bridge crane operation and safety
6. Forklift truck operation and safety
7. Manual Handling yang meminimalkan kecelakaan kerja
8. Perancangan sistem deteksi dini potensi kecelakaan kerja
9. Perancangan gudang yang aman, ergonomis dan nyaman bagi pekerja

  • Implementasi 5R di pergudangan
  • Penyusunan indikator keberhasilan 5R yang berkesinambungan

10. Audit keberhasilan program manajemen keselamatan kerja
11. Studi kasus pengelolaan pergudangan dengan berbagai resiko kecelakaan

AHLI K3 LISTRIK

PENDAHULUAN PELATIHAN AHLI K3 LISTRIK

  1. UU No. 1 Tahun 1970 Tentang Keselamatan Kerja
  2. Kepmenakertas No : Kep – 75/MEN/2002 Tentang Pemberlakuan Standar Nasional (SNI) No. SNI-04-0225-2000 Mengenai Persyaratan Umum Instalasi Listrik 2000 (PUIL 2000)diTempatKerja
  3. Permenaker No : Per-02/MEN/1992 Tentang Cara Penunjukan Kewajiban dan Wewenang Ahli Keselamatan dan Kesehatan Kerja

TUJUAN PELATIHAN AHLI K3 LISTRIK

Setelah selesai mengikuti pelatihan dan lulus ujian, peserta akan mengetahui tugas dan kewajiban dalam melaksanakan persyaratan, sistem dan proses K3 di tempat kerja sesuai dengan peraturan dan perundang-undangan yang berlaku.

MATERI PELATIHAN AHLI K3 LISTRIK

  1. Kebijakan UU No. 1 tahun 1970 K3
  2. Pengawasan & Pembinaan Norma K3 Bidang Listrik
  3. Persyaratan K3 Rancangan Instalasi Listrik
  4. Persyaratan K3 Sistem Proteksi Untuk Keselamatan Listrik
  5. Persyaratan K3 Pembangkitan Tenaga Listrik
  6. Persyaratan K3 Jaringan Instalasi Tenaga dan Perlengkapannya
  7. Persyaratan K3 Instalasi Penerangan
  8. Persyaratan K3 Peralatan Instalasi Tenaga/Daya
  9. Persyaratan K3 Perlengkapan Hubung Bagi dan Kendali (PHB) serta komponennya
  10. Persyaratan Ketentuan Bagi Berbagai Ruang dan Instalasi khusus
  11. Persyaratan K3 pada penggunaan peralatan uji listrik
  12. Persyaratan K3 Sistem Proteksi Instalasi Penyalur Petir
  13. Identifikasi bahaya, penilaian, pengendalian resiko listrik
  14. Pelaporan dan analisa kecelakaan kerja bidang listrik
  15. Prosedur Kerja aman pada instalasi listrik
  16. Praktek kerja Lapangan (PKL)
  17. Seminar

 

Pelatihan Petugas K3 Kimia – sertifikasi Depnakertrans

Dasar Hukum

Berdasarkan Keputusan Menteri Tenaga Kerja No. kep. 187/MEN/1999 tentang pengendalian bahan kimia berbahaya di tempat kerja maka perusahaan dengan kategori potensi bahaya besar wajib mempekerjakan Ahli K3 Kimia sekurang – kurangnya 1 orang serta Petugas K3 Kimia sekurang – kurangnya 2 orang (non shift) dan 5 orang (shift). Sedangkan pada kategori menengah wajib mempekerjakan Petugas K3 Kimia 1 orang (non shift) dan 3 orang (shift): (pasal 18 ayat 1(b) dan pasal 17 ayat 1 (a)

Tujuan Training Petugas K3 Kimia

Setelah mengikuti pelatihan ini, peserta akan mampu mengetahui dan memahami :

  1. Peraturan perundangan K3 Kimia dan lingkungan;
  2. Dalam mengidentifikasi bahaya;
  3. Pelaksanaan prosedur kerja yang aman;
  4. Pelaksanaan prosedur penanggulangan keadaan darurat;
  5. Dalam mengembangkan pengetahuan K3 bidang kimia.

Materi Pelatihan Petugas K3 Kimia

  1.         Kebijaksanaan Depnaker di bidang K3
  2.         Peraturan perundang-undangan bidang K3
  3.         Peraturan tentang pengendalian bahan kimia berbahaya
  4.         Pengetahuan dasar bahan kimia berbahaya
  5.         Penyimpanan dan penanganan bahan kimia berbahaya
  6.         Prosedur kerja aman
  7.         Prosedur penanganan kebocoran dan tumpuhan
  8.         Penilaian dan pengendalian resiko bahan kimia berbahaya
  9.         Pengendalian lingkungan kerja
  10.         Penyakit akibat kerja oleh faktor kimia dan cara pencegahannya
  11.         Rencana dan prosedur tanggap darurat
  12.         Lembar data keselamatan bahan dan label
  13.         Dasar – dasar toksikologi
  14.         Pertolongan pertama pada kecelakaan (P3K)
  15.         Peningkatan aktivitas P2K3
  16.         Studi Kasus
  17.         Kunjungan Lapangan
  18.         Evaluasi

Food Safety

Deskripsi

Keracunan makanan atau yang dikenal dengan food poisoning, sekarang marak terjadi dan menimbulkan korban yang tidak sedikit. Disadari atau tidak, kejadian ini menimbulkan gangguan produktifitas kerja, serta keresahan masyarakat sehingga sering menimbulkan kerugian yang tak terbayangkan bagi perusahaan. Selain menimbulkan permasalahan kesehatan yang memakan biaya tidak sedikit, terhentinya produksi perusahaan baik karena sebagian pekerjanya sakit ataupun pekerjaan lain yang berhenti bekerja karena harus menolong korban, timbulnya permasalahan dari aspek / gugatan berkaitan dengan hukum dan hilangnya reputasi perusahaan, merupakan sumber kerugian bagi perusahaan.
Karena itu peningkatan kemampuan dan pengetahuan bagi pelaksana penyaji/pengelola makanan (foodhandler) sebagai ujung tombak dari kegiatan ini adalah hal yang tidak dapat ditunda lagi, dan pelatihan ini bertujuan meningkatkan kemampuan dan pengetahuan ini, dengan demikian akan terjadi perubahan perilaku (behavior) kearah yang lebih hygiene dan sehat. Disadari pula bahwa hal ini belum cukup Komitmen dari pihak Manajemen perusahaan merupakan hal yang lebih penting lagi, dimana penyediaan infrastruktur yang memadai sehingga memungkinkan foodhandler bekerja dengan baik, serta menyadari pentingnya pelatihan seperti sebagai syarat utama bagi para foodhandlernya akan sangat menunjang kearah tercapainya tujuan diatas.



Objective

Pelatihan  ini bertujuan untuk :

  • Mengenalkan bahaya yang dapat timbul akibat penanganan makanan  yang tidak  pada tempatnya.
  • Memberikan pengetahuan bagaimana cara mencegah serta  menanggulangi agar tidak terjadi keracunan makanan.



Materi Pelatihan Food Safety

a.    Introduction to Food Safety
b.    Perduli terhadap pelanggan anda.
c.    Bahan Kimia dan Fisik dalam bahan pangan
d.    Penyakit bawaan makanan
e.    Dampak penyakit yang ditularkan melalui makanan  terhadap status gizi
f.    Perundangan yang terkait dalam pengolahan makanan ( KEPMENKES     715     Tahun 2003 )
g.    Pembersihan dan sanitasi
h.    Prinsip Higiene – sanitasi dalam pengolahan makanan

HEALTH AND SAFETY COURSE

LATAR BELAKANG TRAINING HEALTH AND SAFETY COURSE

Banyak kecelakaan yang sebenarnya tidak perlu terjadi, tetapi bisa terjadi dan sangat merugikan. Karena itu diperlukan pengetahuan untuk mencegahnya agar kerugian dapat dihindarkan. Semua kecelakaan yang pernah terjadi ada sebabnya, semua sebab bisa dicari dan diketahui, karena itu semua sebab kecelakaan dapat dihindari sehingga semua kecelakaan bisa ditiadakan, sampai tercapai bebas kecelakaan. Salah satu cara mencegah Kecelakaan Kerja yaitu dengan menerapkan kaidah-kaidah Keselamatan dan Kesehatan Kerja di tempat kerja, yang harus dipatuhi oleh semua karyawan.

MANFAAT HEALTH AND SAFETY COURSE TRAINING

  1. Meningkatkan kesadaran peserta terhadap pentingnya tindak pencegahan kecelakaan dan menggugahnya untuk mendorong karyawan dilingkungan kerjanya agar mau melakukan tindakan pencegahan kecelakaan.
  2. Meningkatkan pengetahuan peserta akan upaya pencegahan kecelakaan dilingkungan kerjanya.
  3. Meningkatkan moral Perusahaan dan karyawan serta mengurangi resiko kerugian bagi Perusahaan



MATERI TRAINING HEALTH AND SAFETY COURSE

  1. Occupational Health and Safety Foundations
  2. Reasons for having Occupational Health and Safety (OHS) in the Company
  3. Hazards Identification, Risk Assessment & Risk Control
  4. Emergency Response
  5. Permit to Work System
  6. Job Safety Analysis
  7. Occupational Health and Safety Programs
  8. Occupational Health and Safety Management System

Hazard Identifiaction Risk Assessment

Deskripsi Training Hazard Identifiaction Risk Assessment

Risk assessment merupakan hal yang wajib di pelajari bagi semua praktisi industri untuk seluruh level / posisi. Kenapa demikian ? Karena di setiap lini pekerjaan di pastikan mempunyai resiko dari setiap aktifitas yang ada. Pemahanan setiap orang dalam memahami resiko bahaya dari pekerjaan akan menentukan proses penanggulangan yang akan di lakukan.

Pekerjaan rutin yang di kerjakan setiap saat haruslah dilakukan proses HIRA (hazard identification & risk assessment), dari proses ini maka bisa di lakukan prioritas cara penanggulangan, baik secara engineering, system prosedure maupun proteksi menggunakan PPE (alat pelindung diri). Pekerjaan yang sifatnya tidak rutin, maka di perlukan permit to work yang di dalamnya sudah mengandung proses risk assessment terlebih dahulu.

Begitu pula di dalam document CSMS (contractor safety management system), proses dasar yang dilakukan dalam tender pekerjaan adalah Risk Assessment, yaitu menganalisa resiko  (risk assesment) dari pekerjaan tsb, yang kemudian akan di tentukan kualitas kontraktor yang akan di pilih.

Risk assessment bisa di lakukan melalui JSA (jobs safety analysis), bisa juga di lakukan melalui TRA (task risk assessment), yang sifatnya lebih detail dan lebih terperinci.

Tujuan Training Hazard Identifiaction Risk Assessment

  • Peserta bisa melakukan hazard identification
  • Peserta bisa memahami cara Risk assessment
  • Peserta bisa melakukan proses JSA
  • Peserta bisa menyiapkan program penanggulangannya

Outline Training Hazard Identifiaction Risk Assessment

  1. Proses terjadinya kecelakaan kerja
  2. Identifikasi bahaya
  3. JSA (jobs safety analysis)
  4. Task Risk Assessment (TRA)
  5. Program kerja

 

Emergency Response Plan

Deskripsi Training Emergency Response Plan 

Kursus ini menguraikan cara-cara mengembangkan dan mengimplementasikan rencana tanggap darurat. Untuk dapat menangani keadaan darurat ketika akan terjadi. Tujuan dari rencana tanggap darurat yaitu harus siap menghadapi situasi tak terduga seperti kebakaran, tumpahan bahan kimia, ledakan, banjir, cedera, penyakit dan situasi krisis lainnya. Rencana seperti itu sangat penting untuk melindungi kesehatan, kehidupan, properti dan lingkungan. Rencana darurat harus secara khusus disesuaikan dengan tempat kerja. Rencana harus jelas menguraikan prosedur yang harus diikuti dalam keadaan darurat. Pendekatan teratur dan siap untuk menghadapi keadaan darurat dapat mengakibatkan kebingungan, kehilangan nyawa, cedera, kerugian keuangan atau bisnis, dan kerusakan properti.

 

Tujuan Training Emergency Response Plan 

  • Meningkatkan kesadaran peserta akan pentingnya kesigapan perusahaan menghadapi keadaan darurat yang bisa terjadi.
  • Mengkoordinasikan upaya Perencanaan Tanggap Darurat/ ERP sehingga tercapai efisiensi dan efektifitas dalam pengendaliannya.
  • Peserta memahami dengan benar berbagai hal yang terkait dengan ERP sebagai suatu sistem yang selalu dibutuhkan dan diaplikasikan dalam keadaan darurat sehingga pengendalian bisa dilakukan secara cepat dan tepat.
  • Mengetahui apa saja yang bisa terjadi dalam keadaan darurat dan melatih kesiapan mengahadapi keadaan emergency sehingga rasa gugup dan panik dapat diatasi.
  • Mempersiapkan diri dalam mengurangi kemungkinan kerugian yang lebih besar bila dalam keadaan darurat.
  • Mengatur tata cara dalam pelaksanaan penanggulangan Keadaan Darurat sehingga kerugian perusahaan dapat diminimalisir.
  • Peserta Mampu mengembangkan sistem dan program Emergency Response Plan (ERP)
  • Memastikan tindakan pengendalian sesuai Prosedur dan Organisasi Emergency Response Plan (ERP)

Materi Training Emergency Response Plan

1. Introduction to Emergency Response Plan

  • Definisi Darurat dan Bencana
  • Jenis-jenis dari Keadaan Darurat dan Bencana
  • Disaster Management in Indonesia
  • Disaster Management Elements
  • Development of Disaster Management
  • ERP Programs

2. Persiapan dan Perencanaan Tanggap Darurat

  • Pengantar Sistem Manajemen Tanggap Darurat
  • Pembentukan Team Emergency
  • Emergency Organization
  • Struktur Organisasi, Tugas, & Fungsi
  • ERP Programs
  • Prosedur-prosedur dalam Emergency

3. Penanggulangan Ketika terjadinya Emergency

  • Sistem Evakuasi Orang
  • Sistem Evakuasi Peralatan

4. Penanggulangan Pasca Bencana / Emergency

  • Penanganan setelah Terjadinya Bencana / Emergency
  • Medical Emergency

5. Sistem Pelaporan dan Komunikasi

  • Sistem-sistem pelaporan dan Tanggung jawab
  • Jalur-jalur Komunikasi

6. Crisis Management to Improve Emergency Response Plan (ERP) Program Development

7. Simulasi Emergency (Kebakaran, P3K Respon, Evakuasi Korban, Komunikasi)

K3 OIL AND GAS

Deskripsi Training K3 OIL AND GAS

Pekerjaan dalam dunia pertambangan minyak dan gas merupakan salah satu bidang pekerjaan dengan potensi bahaya yang besar. Beberapa kecelakaan sering terjadi dan sering kita dengan dimana akibat kecelakaan tersebut membuat tak sedikit korban luka-luka maupun korban jiwa. Untuk mengantisipasi masalah tersebut maka pemerintah mendorong diberlakukannya sistem manajemen K3 dalam aktivitas pertambangan oil and gas.

Selain K3 merupakan suatu bentuk persyaratan pemeritahan yang harus ditaati dan dipenuhi, perusahaan seharusnya juga menjadikan K3 tersebut sebagai bentuk kebutuhan untuk setiap tiap individu yang bekerja atau terlibat dalam kegiatan pertambangan, karena pada hakekatnya tiap orang yang bekerja ingin kesehatan dan keselamatannya terjamin. Banyak Owner perusahaan pertambangan sekarang juga menghargai K3, dimana mereka lebih memilih penyedia jasa yang mengimplementasikan K3 meskipun dengan penawaran yang mahal. Terjadinya kecelakaan kerja tentunya tidak diinginkan oleh semua pihak, karena dapat menimbulkan penderitaan, kerugian keuangan yang tidak sedikit, dan tentunya berhubungan dengan imej dan reputasi perusahaan itu sendiri.

Tujuan Training K3 OIL AND GAS

Setelah mengikuti training ini, peserta diharapkan mampu untuk memahami bahaya-bahaya pada proyek pertambangan, peraturan-peraturan yang pemerintah perihal penerapan K3, langkah-langkah dalam penyusunan program sistem manajemen K3, kendala-kendala yang dihadapai dalam implementasi dan solusinya.

Materi K3 Oil and Gas

  1. Peraturan-Peraturan / Dasar Hukum Penyelenggaraan K3 perusahaan tambang
  2. Resiko bahaya lingkungan kerja Proyek Pertambangan
  3. Pentingnya penerapan k3 di perusahaan tambang
  4. Sistem Manajemen K3/ OHSAS 18001:2007
  5. Merencanakan program K3
  6. Pencegahan kecelakaan pada perusahaan pertambangan
  7. Sosialiasi Ahli Manajemen K3 bidang Pertambangan.
  8. Implementasi dan Sertifikasi SMK3
  9. Studi Kasus

IPAL: Wastewater Treatment Technology

DESKRIPSI Training IPAL : Wastewater Treatment Technology

Pelatihan Wastewater Treatment Technology (IPAL) ditujukan bagi para perencana, pelaksana dan pengawas pekerjaan di lingkungan industri yang wajib menguasasi teknik dan instalasi pengolahan limbah. Dengan metode diskusi kelompok, studi kasus dan studi lapangan yang dibimbing instruktur yang fakar dibidangnya diharapkan setelah selesai mengikuti pelatihan ini dapat menentukan teknik dan instalasi yang tepat untuk diterapkan di lingkungan kerja masing-masing.

 

TUJUAN Training IPAL : Wastewater Treatment Technology

Setelah mengikuti training dan workshop ini, maka diharapkan

  1. Memahami prinsip manajemen teknologi limbah industri
  2. Memahami sistem pengolahan limbah cair secara fisika, kimia maupun biologi
  3. Memahami sistem pengolahan limbah gas pada industri petrokimia dan petroleum
  4. Memahami perencanaan dan pengendalian IPAL melalui site visit

 

MATERI Training IPAL : Wastewater Treatment Technology

  • Manajemen Teknologi Limbah Industri
  • Sistem Pengolahan Limbah Cair secara fisika
  • Sistem Pengolahan Limbah Cair secara kimia
  • Sistem Pengolahan Limbah Cair secara biologi
  • Sistem Pengolahan Limbah Gas pada industri petrokimia dan petroleum
  • Perencanaan dan Pengendalian IPAL
  • Site Visit dan Studi Kasus Lapangan

 

 

TRAINING AMDAL UNTUK INDUSTRI MINERBA

Jadwal TRAINING AMDAL UNTUK INDUSTRI MINERBA 2015 di Yogyakarta (Bisa request tanggal selain yang tertera)

05 – 07 Oktober 2015 / 19 – 21 Oktober 2015 / 26 – 28 Oktober 2015 / 02 – 04 November 2015 / 09 – 11 November 2015 / 16 – 18 November 2015 / 23 – 25 November 2015 / 30 November-2 Desember 2015 / 07 – 09 Desember 2015 / 14 – 16 Desember 2015 / 21 – 23 Desember 2015 / 28 – 30 Desember 2015

Jadwal TRAINING AMDAL UNTUK INDUSTRI MINERBA 2016  di Yogyakarta (Bisa request tanggal selain yang tertera)

19-21 Januari 2016 / 09-11 Februari 2016 / 15-17 Maret 2016 / 05-07 April 2016 / 10-12 Mei 2016 / 07-09 Juni 2016 / 12-14 Juli 2016 / 09-11 Agustus 2016 / 06-08 September 2016 / 11-13 Oktober 2016 / 15-17 November 2016 / 13-15 Desember 2016

Lokasi Training Pilihan : di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado. (dengan harga dan minimal kuota yang berbeda)

TRAINING AMDAL UNTUK INDUSTRI MINERBA

Deskripsi Training AMDAL untuk Industri MINERBA

Industri Minerba dan lingkungan merupakan dua hal yang tak terpisahkan dan saling melengkapi satu dengan yang lain. Akan tetapi apabila kepentingan industri tidak dikelola dengan baik maka lingkungan dapat tercemari sehingga menurunkan kualitas dari lingkungan itu sendiri. Maka dari itu, sebelum proses industri dimulai, perlu dilakukan analisa mengenai dampak lingkungan (AMDAL) yang dapat memetakan persoalan secara terperinci mengenai kondisi yang ada dalam suatu daerah yang akan dibangun industri. Proses ini menjadi penting, mengingat AMDAL tidak hanya memfokuskan persoalan pada lingkungan fisik saja, akan tetapi menyangkut pada persoalan sosial dan kemasyarakatan, sehingga perusahaan mengerti apakah dalam jangka waktu lama industri tersebut didukung oleh masyarakat dan lingkungan sekitarnya atau tidak. Dengan memiliki pemetaan tersebut, perusahaan dapat menentukan tindakan yang tepat yang perlu dilakukan untuk mencegah penurunan kualitas lingkungan dan tetap menarik minat masyarakat sekitar dalam mendukung usaha bisnis industri yang dilakukan.

Tujuan Training AMDAL untuk Industri MINERBA

Setelah mengikuti pelatihan ini, peserta diharapkan :

  1. Mengetahui secara mendalam prosedur penanganan AMDAL untuk industri Minerba
  2. Menguasai kecakapan teknis dalam menyelesaikan persoalan dalam bidang AMDAL untuk industry industri Minerba
  3. Mengerti persoalan yang kerap terjadi dalam pelaksanaan AMDAL berikut dengan penanganannya

Materi Training AMDAL untuk Industri MINERBA

  1. Definisi dan pengertian AMDAL untuk industri Minerba
  2. Ruang lingkup AMDAL untuk industri Minerba
  3. Prosedur teknis dalam melaksanakan AMDAL Industri Minerba
  4. Perencanaan dan pemetaan lingkungan
  5. Metodologi pengumpulan data pada AMDAL Industri Minerba
  6. Penilaian AMDAL Industri Minerba
  7. persoalan AMDAL industri Minerba
  8. Studi kasus

Metode

Presentasi, lecture, studi kasus, tanya jawab, brainstorming, diskusi

 

Investasi dan Fasilitas

  • 7.500.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Lead Instruktur

Latifah Damanik, ST.,M.Si and team

DASAR KESELAMATAN DAN KESEHATAN KERJA & TEAM WORK BUILDING

Jadwal training 2015 di Yogyakarta (Bisa request tanggal selain yang tertera)

06-07 Juli 2015/ 29-30 Juli 2015 / 26-27 Agustus 2015 / 15-16 September 2015 / 08-09 Oktober 2015 / 09-10 November 2015 / 08-09 Desember 2015

Jadwal Training 2016 di Yogyakarta (Bisa request tanggal selain yang tertera)

19-20 Januari 2016 / 09-10 Februari 2016 / 15-16 Maret 2016 / 05-06 April 2016 / 10-11 Mei 2016 / 07-08 Juni 2016 / 12-13 Juli 2016 / 09-10 Agustus 2016 / 06-07 September 2016 / 11-12 Oktober 2016 / 15-16 November 2016 / 13-14 Desember 2016

Lokasi Training Pilihan : di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado. (dengan harga dan minimal kuota yang berbeda)

DESKRIPSI

DASAR KESELAMATAN DAN KESEHATAN KERJA & TEAM WORK BUILDING

Setiap tempat kerja di wajibkan oleh perundangan untuk mengembangkan program Keselamatan dan Kesehatan Kerja dalam upaya menghindarkan terjadinya terjadinya kecelakaan serta penyakit akibat kerja. Mengingat setiap organisasi memiliki typical yang berbeda-beda, maka program Keselamatan dan Kesehatan Kerja yang dikembangkan perlu disesuaikan dengan kebutuhan masing-masing yang spesifik.

Sebaliknya, produktifitas usaha sangat terkait dengan  tempat kerja serta lingkungan kerja yang aman dan sehat, yang berpengaruh terhadap performance kerja karyawan. Menciptakan tempat kerja yang aman dan sehat merupakan tantangan tersendiri. Tanpa kerja sama antara manajemen dan karyawan akan sulit mencapai hal tersebut. Diperlukan keseimbangan antara organisasi, teknologi, lingkungan kerja serta beban kerja untuk mencapainya. Dan diperlukan komitmen yang tinggi baik dari pimpinan maupun karyawan terhadap usaha menciptakan tempat kerja uyang aman dan sehat. Kata kuncinya adalah diperlukannya suatu team work yang handal untuk mencapai target yang diharapkan.

PENGETAHUAN YANG DIDAPAT.

Dengan training ini perusahaan akan mendapatkan hal-hal berikut :

  • Karyawan memahami pentingnya bekerja dengan cara yang aman tanpa mengambil risiko bagi kesehatan mereka.
  • Mengembang kultur positif baik dari segi keselamatan maupun kesehatan kerja, sehingga dapat memberikan perlindungan baik bagi karyawan maupun konsumen.
  • Mengenal aspek Keselamatan dan Kesehatan Kerja dalam Food Safety.
  • Memenuhi persyaratan perundangan yang berlaku.
  • Dengan training yang efektif, akan membuat karyawan kompeten terhadap permasalahan keselamatan dan kesehatan kerja, mengurangi terjadinya keselakaan dan penyakit akibat kerja, sehingga dapat menurunkan biaya medis yang harus dikeluarkan oleh perusahaan.

MATERI PELATIHAN

Materi training yang tercakup, antara lain :

  • Introduction : Konsep dasar Keselamatan dan Kesehatan kerja, pentingnya pengembangan di tempat kerja, Rules and Regulation.
  • Management Commitment : OHS Committee, New Employee Orientation, Safe Work Procedures
  • Workplace Heath and Safety Hazards : Inspection, Hazard Identification – Assessment – Evaluation – Communication, Underdtanding risk factor : Physics, Chemicals, Biological, Ergonomics, Psikosocial.
  • Hazard Prevention and Control : Accident & Illness Prevention, Incident Investigation, JSA, Confined Space Entry, Hazard Communication (MSDS, Labeling), etc.
  • Emergency Response : Fire prevention, Electrical Safety, First Aid, etc.
  • Food safety program : Prerequisite program on food safety for food manufacturing,  Potential Food Safety Hazards, Food Handling Fundamentals, Manual Handling, etc.
  • Team Work Building : Guiding principles, Symptoms that signal a need for a team building, Step to building an effective team.

SIAPA YANG PERLU MENGIKUTI

Pelatihan ini penting diikuti oleh : Manager, Supervisor, HSE officer and manager,HSE Committee,  HRD dan semua karyawan yang berkepentingan dan berminat.

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta)
  • Quota minimum Running 2 peserta (jogja, Solo, Semarang) Quota minimum Running 3 peserta (Jakarta , Bandung dan Surabaya ) –  ( Untuk Manado, Bali , Batam, Pontianak, Balikpapan dan Lombok Quota minimal 4 peserta)

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami via :

Mobile : 0823 2326 5005 – 0857 2459 5005

Email : trainingcenterindo@gmail.com / info@jadwaltraining.co.id

Blog : https://informasitrainingdanseminar.wordpress.com

Web: www.informasitraining-indonesia.com

Web www.jadwaltraining.co.id

Jadwal training 2015 | Jadwal training 2016 | Jadwal training 2017 | Jadwal training 2018 | Jadwal training 2019 | Jadwal training 2020

 

Training HSE for Oil and Gas

Training HSE for Oil and Gas

Jadwal training 2015 di Yogyakarta (tentative / as request)

27-29 Mei 2015 / 15-17 Juni 2015 / 20-22 Juli 2015/ 09-11 Agustus 2015 / 15-17 September 2015
08-10 Oktober 2015 / 08-10 November 2015 / 07-09 Desember 2015

Jadwal Training 2016 di Yogyakarta (tentative / as request)

19-21 Januari 2016 / 09-11 Februari 2016 / 15-17 Maret 2016 / 05-07 April 2016 / 10-12 Mei 2016 / 07-09 Juni 2016 / 12-14 Juli 2016 / 09-11 Agustus 2016 / 06-08 September 2016 / 11-13 Oktober 2016 / 15-17 November 2016 / 13-14 Desember 2016

DESKRIPSI TRAINING BASIC HSE FOR OIL AND GAS

Sebagai tempat yang memiliki resiko tinggi dalam menjalankan operasinya, perusahaan yang bergerak dalam pertambangan minyak dan gas telah seharusnya memperhatikan secara detail aspek kesehatan dan keselamatan karyawan, terutamanya karyawan kontraktor yang bekerja di bagian operasional produksi. Terjadinya kecelakaan selain secara pasti merugikan perusahaan dalam bidang keuangan dan produktivitas, hal tersebut juga dapat menurunkan reputasi yang berakibat pada kepercayaan masyarakat dan pemerintah dalam menjalankan izin penambangan. Oleh sebab itu, perusahaan memerlukan sistem manajemen terpadu yang dapat meningkatkan efektivitas perlindungan keselamatan dan kesehatan pekerja secara terencana dan terevaluasi. Dengan optimalisasi fungsi health, safety & environment (HSE) pada perusahaan, pada akhirnya pekerja dapat merasakan suasana dan iklim kerja yang nyaman, aman dan efesien yang dapat menguntungkan perusahaan karena meningkatkanya daya produktivitas karyawannya. Training ini akan memberikan pengetahuan dan pengalaman yang secara mendasar diperlukan untuk menyiapkan sistem HSE yang efektif di perusahaan pertambangan minyak dan gas (HSE FOR OIL AND GAS).

TUJUAN TRAINING BASIC HSE FOR OIL AND GAS
Setelah mengikuti training ini diharapkan peserta dapat :

  1. Memahami dalam mengelola dan mengefektifkan sistem manajemen HSE di pertambangan minyak dan gas  (HSE FOR OIL AND GAS)
  2. Lebih terampil dalam memecahkan persoalan dan perencanaan dalam bidang HSE

 

MATERI TRAINING BASIC HSE FOR OIL AND GAS

  1. Ruang lingkup, peran, dan manfaat pengelolaan sistem manajemen HSE
  2. Identifikasi potensi bahaya dan resiko di perusahaan pertambangan minyak dan gas
  3. Standar penerapan sistem manajemen HSE (Regulasi pemerintah, OHSAS 18001)
  4. Perencanaan dan sosialisasi program HSE kepada karyawan
  5. Sistem kendali mutu HSE yang efektif
  6. Pelaporan dan investigasi
  7. Membangun emergency respon system dalam mitigasi HSE
  8. Studi kasus implementasi HSE di perusahaan

METODE
Presentasi, lecture, studi kasus, tanya jawab, brainstorming, diskusi

PESERTA
Direktur Perusahaan, General Manager, Manager, Manager operasional, staf operasional, staf maintenance, staf produksi, Manajer  dan staff HSE

Investasi dan Fasilitas

  • Rp.7.400.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel

 

INSTRUKTUR

  • Murono Haryanto, ST
  • Drs. Suharyana M.Kes

Lokasi Training (Tentative) dengan harga yang berbeda

  • Hotel Santika Kuta, Bali
  • Hotel Nagoya Plaza, Batam
  • Hotel Fave, Balikpapan
  • Hotel Aston, Manado
  • The Santosa Villas and Resort, Lombok
  • Hotel Gino Ferucci, Bandung
  • Hotel Santika Pandegiling, Surabaya
  • Hotel Fave Pasar baru Jakarta, Jakarta
  • Hotel Ibis Solo
  • Hotel Aston, Pontianak
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Ibis Malioboro, Yogyakarta

 

Permintaan Brosur penawaran Training silahkan Menghubungi kami via :

Mobile : 0823 2326 5005 – 0857 2459 5005

Email : trainingcenterindo@gmail.com / info@jadwaltraining.co.id

Blog : https://informasitrainingdanseminar.wordpress.com

Web: www.informasitraining-indonesia.com

Web www.jadwaltraining.co.id

TRAINING BAHAN BERACUN BERBAHAYA : PENANGANAN DAN PENYIMPANAN

Jadwal training 2015 di Yogyakarta (tentative / as request)

27-29 Mei 2015 / 15-17 Juni 2015 / 20-22 Juli 2015/ 09-11 Agustus 2015 / 15-17 September 2015
08-10 Oktober 2015 / 08-10 November 2015 / 07-09 Desember 2015

Jadwal Training 2016 di Yogyakarta (tentative / as request)

19-21 Januari 2016 / 09-11 Februari 2016 / 15-17 Maret 2016 / 05-07 April 2016 / 10-12 Mei 2016 / 07-09 Juni 2016 / 12-14 Juli 2016 / 09-11 Agustus 2016 / 06-08 September 2016 / 11-13 Oktober 2016 / 15-17 November 2016 / 13-14 Desember 2016

DESKRIPSI TRAINING BAHAN BERACUN BERBAHAYA : PENANGANAN DAN PENYIMPANAN

Tidak sedikit industri yang dalam proses produksinya menggunakan bahan-bahan kimia yang pada dasarnya termasuk bahan beracun berbahaya (B3). Kesalahan  dalam pengelolaan B3 dapat menyebabkan kecelakaan di tempat kerja, seperti, kebakaran, keracunan,  ledakan, penyakit, dan lain-lain. Oleh sebab itulah, industri yang menggunakan bahan beracun berbahaya (B3) perlu mengetahui secara mendetail mengenai teknik praktis dan strategis dalam menangani dan menyimpan B3 sehingga kecelakaan yang tidak diinginkan bisa diminimalisir, bahkan ditiadakan. Terlebih lagi apabila kecelakaan tersebut sampai ke masyarakat, maka mungkin saja dapat timbul konflik antara perusahaan dengan masyarakat di sekelilingnya. Pekerja teknis di lapangan membutuhkan kecakapan untuk mengidentifikasi dan mengklasifikasikan bahan kimia tersebut. Selain itu, mereka juga patut mengerti bagaimana menangani dan menyimpan bahan kimia bahan beracun berbahaya (B3) serta bagaimana memantau dan mengantisipasi berbagai resiko bahan kimia bahan beracun berbahaya (B3).

TUJUAN TRAINING BAHAN BERACUN BERBAHAYA : PENANGANAN DAN PENYIMPANAN

  1. Memberikan pemahaman mendasar mengenai urgensi penerapan penanganan dan penyimpanan bahan kimia yang dianggap berbahaya dan beracun
  2. Memberikan ketrampilan teknis dalam mengelola (menangani dan menyimpan) bahan kimia yang termasuk bahan beracun berbahaya (B3)
  3. Memberikan kecakapan untuk menyelesaikan masalah (problem solving skill) pada persoalan yang berhubungan dengan penyimpanan dan penanganan bahan beracun berbahaya (B3)

MATERI TRAINING BAHAN BERACUN BERBAHAYA : PENANGANAN DAN PENYIMPANAN

  1. Ruang lingkup penanganan dan penyimpanan bahan kimia berbahaya
    • Urgensi penerapan penanganan dan penyimpanan bahan beracun berbahaya (B3)
    • Peraturan pemerintah, undang-undang yang berkaitan dengan penanganan bahan beracun berbahaya (B3) di industri
  2. Identifikasi berbagai bahan kimia yang termasuk ke dalam bahan beracun berbahaya (B3)
  3. Strategi labelling B3
  4. Teknis dari strategi penyimpanan bahan beracun berbahaya (B3)
  5. Pengangkutan B3 yang aman
  6. Sifat dan karakteristik berbagai macam bahan kimia yang termasuk bahan beracun berbahaya (B3)
  7. Potensi bahaya yang ditimbulkan B3 dan pencegahannya
  8. Studi kasus

METODE

Presentasi, studi kasus, brainstorming, diskusi, tanya jawab

PESERTA

Direktur, manajer operasi, manajer pergudangan, manajer HSE, staf bahan kimia berbahaya

Investasi dan Fasilitas Training

  • Rp. 6.300.000/-Orang
  • Rp. 5.500.000/-Orang (minimal mengirimkan lebih dari 1 orang dari perusahaan yang sama)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta)
  • Quota minimum Running 2 peserta (jogja, Solo, Semarang) Quota minimum Running 3 peserta ( Jakarta & Bandung) –  ( Untuk Manado, Bali , Batam, Pontianak, Balikpapan dan Lombok Quota minimal 4 peserta)

Lokasi Training (Tentative) dengan harga yang berbeda

  • Hotel Santika Kuta, Bali
  • Hotel Nagoya Plaza, Batam
  • Hotel Fave, Balikpapan
  • Hotel Aston, Manado
  • The Santosa Villas and Resort, Lombok
  • Hotel Gino Ferucci, Bandung
  • Hotel Santika Pandegiling, Surabaya
  • Hotel Fave Pasar baru Jakarta, Jakarta
  • Hotel Ibis Solo
  • Hotel Aston, Pontianak
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Ibis Malioboro, Yogyakarta

 

Permintaan Brosur penawaran Training silahkan Menghubungi kami via :

Mobile : 0823 2326 5005 – 0857 2459 5005

Email : trainingcenterindo@gmail.com / info@jadwaltraining.co.id

Blog : https://informasitrainingdanseminar.wordpress.com

Web: www.informasitraining-indonesia.com

Web www.jadwaltraining.co.id

AHLI K3 KONSTRUKSI

Jadwal training 2015 di Yogyakarta (tentative / as request)

28-29 Mei 2015 / 15-16 Juni 2015 / 20-21 Juli 2015/ 10-11 Agustus 2015 / 15-16 September 2015
08-09 Oktober 2015 / 09-10 November 2015 / 08-09 Desember 2015

Jadwal Training 2016 di Yogyakarta (tentative / as request)

19-20 Januari 2016 – 09-10 Februari 2016 – 15-16 Maret 2016 – 05-06 April 2016 – 10-11 Mei 2016 – 07-08 Juni 2016 – 12-13 Juli 2016 – 09-10 Agustus 2016 – 06-07 September 2016 – 11-12 Oktober 2016 – 15-16 November 2016 – 13-14 Desember 2016

Deskripsi

Beragamnya kegiatan dalam suatu proyek konstruksi dapat meningkatkan potensi kecelakaan kerja yang dapat merugikan perusahaan baik dari sisi financial, reputasi dan citra positif. Oleh sebab itu, perusahaan membutuhkan tenaga kerja yang terampil dalam menangani permasalahan pada kesehatan dan keselamatan kerja dalam suatu proyek konstruksi.hal ini dimaksudkan agar potensi kecelakaan dapat diminimalisir atau bahkan dihilangkan sehingga perusahaan jasa konstruksi dapat mencapai dan meningkatkan perfomansi kerjanya. Tenaga kerja tersebut bertugas untuk merencanakan, melaksanakan dan mengevaluasi penerapan ketentuan K3 agar dapat mencapai tingkat efektivitas dan efesiensi dalam penyelenggaraan konstruksi yang mampu mencapai nihil kecelakaan kerja dan penyakit akibat kerja



Tujuan

Setelah mengikuti training ini diharapkan peserta dapat :

  1. Memahami akan aspek kesehatan dan keselamatan dalam bidang jasa konstruksi
  2. Menyelesaikan persoalan di bidang kesehatan dan keselamatan kerja berikut dengan rekomendasi penyelesaiannya

 

Materi Training Ahli K3 Konstruksi

  1. Ruang lingkup kesehatan dan keselamatan kerja di bisnis bidang jasa konstruksi
  2. Kemampuan identifikasi site-plan, item pekerjaan dan program K3 konstruksi
  3. Prosedur kerja dan penerapan ketentuan K3 konstruksi
  4. Instruksi kerja berbasis K3 konstruksi
  5. Sosialisasi kegiatan, pelatihan dan simulasi program K3
  6. Controlling dan evaluasi dalam penerapan ketentuan K3 konstruksi
  7. Penyusunan teknis K3 konstruksi
  8. Penyusunan laporan rutin K3 Konstruksi
  9. Penyusunan rekomendasi prosedur kerja K3 konstruksi
  10. Studi kasus

 

Metode

Presentasi, lecture, studi kasus, tanya jawab, brainstorming, diskusi



Peserta

Perusahaan yang bergerak dalam bidang konstruksi, staf, tenaga kerja terdidik dan individu yang ingin memperdalam materi training.

Lead Instruktur
Drs. Suharyana, M.Kes
Toriq Arif Ghuzdewan,ST,MCSE

Investasi dan Fasilitas Training

  • Rp. 5.500.000/-Orang
  • Rp. 4.850.000/-Orang (minimal mengirimkan lebih dari 1 dari perusahaan yang sama)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta)
  • Quota minimum Running 2 peserta (jogja, Solo, Semarang) Quota minimum Running 3 peserta ( Jakarta & Bandung) –  ( Untuk Manado, Bali , Batam, Pontianak, Balikpapan dan Lombok Quota minimal 4 peserta)

Lokasi Training (Tentative) dengan harga yang berbeda

  • Hotel Santika Kuta, Bali
  • Hotel Nagoya Plaza, Batam
  • Hotel Fave, Balikpapan
  • Hotel Aston, Manado
  • The Santosa Villas and Resort, Lombok
  • Hotel Gino Ferucci, Bandung
  • Hotel Santika Pandegiling, Surabaya
  • Hotel Fave Pasar baru Jakarta, Jakarta
  • Hotel Ibis Solo
  • Hotel Aston, Pontianak
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Ibis Malioboro, Yogyakarta

 

Permintaan Brosur penawaran Training silahkan Menghubungi kami via :

Mobile : 0823 2326 5005 – 0857 2459 5005

Email : trainingcenterindo@gmail.com / info@jadwaltraining.co.id

Blog : https://informasitrainingdanseminar.wordpress.com

Web: www.informasitraining-indonesia.com

Web www.jadwaltraining.co.id

Sistem Manajemen Keselamatan dan Kesehatan Kerja

Jadwal training 2015 di Yogyakarta (tentative / as request)

28-29 Mei 2015 / 15-16 Juni 2015 / 20-21 Juli 2015/ 10-11 Agustus 2015 / 15-16 September 2015
08-09 Oktober 2015 / 09-10 November 2015 / 08-09 Desember 2015

Jadwal Training 2016 di Yogyakarta (tentative / as request)

19-20 Januari 2016 – 09-10 Februari 2016 – 15-16 Maret 2016 – 05-06 April 2016 – 10-11 Mei 2016 – 07-08 Juni 2016 – 12-13 Juli 2016 – 09-10 Agustus 2016 – 06-07 September 2016 – 11-12 Oktober 2016 – 15-16 November 2016 – 13-14 Desember 2016

DESKRIPSI SMK3
Bidang keselamatan dan kesehatan tenaga kerja merupakan unsur yang sangat penting yang tidak dapat diabaikan oleh perusahaan. Mengutamakan rasa nyaman dan aman saat bekerja menjadi hak sepenuhnya bagi seorang karyawan terlebih jika mereka bekerja ditingkat resiko kecelakaan yang begitu tinggi. Peraturan Pemerintah (PP) No. 50 Tahun 2012 mengenai penerapan Sistem Manajemen K3 (SMK3). PP No. 50 Tahun 2012 telah ditetapkan pada 12 April 2012 di Jakarta. PP tersebut merupakan peraturan pelaksanaan dari pasal 87 UU No. 13 Tahun 2003 tentang Ketenagakerjaan. Dalam PP Nomor 50 Tahun 2012 tersebut, semua pemberi kerja wajib melaksanakan SMK3, terutama perusahaan yang mempekerjakan minimal 100 tenaga kerja atau perusahaan yang memiliki tingkat potensi kecelakaan yang tinggi akibat karakteristik proses kerja. Training ini akan membahas tentang penerapan sistem manajemen K3 di perusahaan yaitu antara lain tentang bagaimana memahami metoda identifikasi dan pengkajian resiko bahaya K3. Proses penyusunan tujuan, sasaran dan program K3, melakukan gap analysis penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di perusahaan, menyusun sistem dokumentasi K3: Prosedur / SOP dan Instruksi Kerja, menyediakan, mengimplementasikan dan memelihara Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3).

DESKRIPSI SMK3
Bidang keselamatan dan kesehatan tenaga kerja merupakan unsur yang sangat penting yang tidak dapat diabaikan oleh perusahaan. Mengutamakan rasa nyaman dan aman saat bekerja menjadi hak sepenuhnya bagi seorang karyawan terlebih jika mereka bekerja ditingkat resiko kecelakaan yang begitu tinggi. Peraturan Pemerintah (PP) No. 50 Tahun 2012 mengenai penerapan Sistem Manajemen K3 (SMK3). PP No. 50 Tahun 2012 telah ditetapkan pada 12 April 2012 di Jakarta. PP tersebut merupakan peraturan pelaksanaan dari pasal 87 UU No. 13 Tahun 2003 tentang Ketenagakerjaan. Dalam PP Nomor 50 Tahun 2012 tersebut, semua pemberi kerja wajib melaksanakan SMK3, terutama perusahaan yang mempekerjakan minimal 100 tenaga kerja atau perusahaan yang memiliki tingkat potensi kecelakaan yang tinggi akibat karakteristik proses kerja. Training ini akan membahas tentang penerapan sistem manajemen K3 di perusahaan yaitu antara lain tentang bagaimana memahami metoda identifikasi dan pengkajian resiko bahaya K3. Proses penyusunan tujuan, sasaran dan program K3, melakukan gap analysis penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di perusahaan, menyusun sistem dokumentasi K3: Prosedur / SOP dan Instruksi Kerja, menyediakan, mengimplementasikan dan memelihara Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3).

TUJUAN TRAINING SMK3
Peserta memahami sistem SMK3 dan mampu untuk merencanakan, mengimplementasikan dan mengevaluasi sistem SMK3 di perusahaan.

MATERI SMK3

  1.  Ruang lingkup Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3)
  2.  Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) berdasarkan PP No.50 tahun 2012 dan OHSAS 18001:2007
  3. Metoda identifikasi dan pengkajian resiko bahaya k3
  4. Proses Penyusunan Tujuan, Sasaran dan program K3
  5. Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di perusahaan
  6. Dokumentasi K3: Prosedur atau SOP dan Instruksi Kerja
  7. Pemeliharaan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3)

Instruktur Training :
instruktur yang kompeten dang berpengalaman dibidangnya.

Investasi dan Fasilitas Training

  • Rp. 5.500.000/Person
  • Rp. 4.850.000/Person (bila mengirimkan lebih dari 1 orang)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta)
  • Quota minimum Running 2 peserta (jogja, Solo, Semarang) Quota minimum Running 3 peserta ( Jakarta & Bandung) –  ( Untuk Manado, Bali , Batam, Pontianak, Balikpapan dan Lombok Quota minimal 4 peserta)

Lokasi Training (Tentative) dengan harga yang berbeda

  • Hotel Santika Kuta, Bali
  • Hotel Nagoya Plaza, Batam
  • Hotel Fave, Balikpapan
  • Hotel Aston, Manado
  • The Santosa Villas and Resort, Lombok
  • Hotel Gino Ferucci, Bandung
  • Hotel Santika Pandegiling, Surabaya
  • Hotel Fave Pasar baru Jakarta, Jakarta
  • Hotel Ibis Solo
  • Hotel Aston, Pontianak
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Ibis Malioboro, Yogyakarta

 

Permintaan Brosur penawaran Training silahkan Menghubungi kami via :

Mobile : 0823 2326 5005 – 0857 2459 5005

Email : trainingcenterindo@gmail.com / info@jadwaltraining.co.id

Blog : https://informasitrainingdanseminar.wordpress.com

Web: www.informasitraining-indonesia.com

Web www.jadwaltraining.co.id

Training Basic HSE for Oil and Gas

Training Basic HSE for Oil and Gas

Perusahaan bidang petrochemical, oil & gas menjadi industri yang paling ketat dalam menerapkan kebijakan HSE health safety & environment. Banyak orang yang menginginkan bekerja di area ini dengan standard safety yang tinggi, tentu dengan remunerasi yang lebih baik pula. Begitu pula semakin banyaknya pekerja kontraktor yang bekerja di area oil & gas akan semakin banyak pula resiko kecelakaan kerja. Tercatat di berbagai data bahwa kecelakaan kerja lebih banyak terjadi pada kontraktor di bandingkan pegawai tetap di perusahaan tersebut.

Mengenal dunia HSE di oil & gas yang mempunyai standard acuan yang lebih tinggi, penting bagi siapa saja yang menginginkan masuk dan bekerja di area oil & gas ini. Di mulai dari standard kesehatan yang tinggi melalui medical check up, keterampilan dan pengalaman, training yang mencukupi dan lain sebagainya. Bagi kontraktor harus menyiapkan CSMS program contractor safety management system yang seringkali menjadi kendala bagi banyak kontraktor.

Pelatihan ini di siapkan bagi siapa saja personal yang menginginkan masuk dunia oil & gas, bagi kontraktor untuk mempersiapkan system CSMS dan lain sebagainya. Selepas workshop, peserta di ajak bergabung di dalam forum diskusi tentang EHS yang ada di Indonesia, sehingga pekerjaan yang baru bisa di support dengan komunitas yang baru dengan members lebih dari 4000 orang praktisi EHS di Indonesia.

 

Objective Basic HSE for Oil and Gas Training

  • Pengenalan HSE (health, safety & environment) bidang Oil & Gas
  • Persiapan memasuki dunia oil & gas (skill, kesehatan, training)
  • Mengenal dan proakif di program HSE area Oil & Gas
  • Menyiapkan CSMS programs dan implementasinya
  • Mengenal system Management K3 dan pelaksanaannya
  • Waste Management dan implementasinya
  • Mengikuti Health Promotion Program
  • Menjalan Permit to Work (PA, IA)
  • Memahami Emergency Response System

 

Outline Basic HSE for Oil and Gas Training

  • Pengenalan HSE Oil & Gas
  • Mengenal SMK3, OHSAS 18001 dan system management
  •  Mengenal HSE program Oil & Gas
  • Implementasi dan pengukuran program K3
  •  Permit to work dan system isolasi
  • CSMS (Contractor Safety Management System)
  • Emergency respon program dan implementasinya
  • Accident reporting & investigation
  • Waste management
  • Studi case

Jadwal Training 2015

Hotel Ibis Malioboro, Yogyakarta

  1. 16 – 18 Maret 2015
  2. 23 – 25 Maret 2015
  3. 30 Maret – 01 April 2015
  4. 06 – 08 April 2015
  5. 13 – 15 April 2015
  6. 20 – 22 April 2015
  7. 27 – 29 April 2015
  8. 04 – 06 Mei 2015
  9. 11 – 13 Mei 2015
  10. 18 – 20 Mei 2015
  11. 25 – 27 Mei 2015
  12. 03 – 05 Juni 2015
  13. 08 – 10 Juni 2015
  14. 15 – 17 Juni 2015
  15. 22 – 24 Juni 2015
  16. 29 Juni- 01 Juli 2015
  17. 06 – 08 Juli 2015
  18. 13 – 15 Juli 2015
  19. 27 – 29 Juli 2015
  20. 03 – 05 Agustus 2015
  21. 10 – 12 Agustus 2015
  22. 18 – 20 Agustus 2015
  23. 24 – 26 Agustus 2015
  24. 31 Agustus – 2 September2015
  25. 07 – 09 September 2015
  26. 14 – 16 September 2015
  27. 21 – 23 September 2015
  28. 28 – 30 September 2015
  29. 05 – 07 Oktober 2015
  30. 12 – 13 Oktober 2015
  31. 19 – 21 Oktober 2015
  32. 26 – 28 Oktober 2015
  33. 02 – 04 November 2015
  34. 09 – 11 November 2015
  35. 16 – 18 November 2015
  36. 23 – 25 November 2015
  37. 30 November-2 Desember 2015
  38. 07 – 09 Desember 2015
  39. 14 – 16 Desember 2015
  40. 21 – 23 Desember 2015
  41. 28 – 30 Desember 2015

Investasi dan Fasilitas

  • Rp.– (Non Residential) Yogyakarta
    • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
    • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta)
    • Quota minimum Running 2 peserta (jogja, Solo, Semarang) Quota minimum Running 3 peserta ( Jakarta & Bandung) –  ( Untuk Manado, Bali , Balikpapan dan Lombok Quota minimal 4 peserta)

    Lokasi Training (Tentative):

    • Hotel Santika Kuta, Bali
    • Hotel Nagoya Plaza, Batam
    • Hotel Fave, Balikpapan
    • Hotel Aston, Manado
    • The Santosa Villas and Resort, Lombok
    • Hotel Gino Ferucci, Bandung
    • Hotel Santika Pandegiling, Surabaya
    • Hotel Fave Pasar baru Jakarta, Jakarta
    • Hotel Ibis Solo
    • Hotel Ibis Simpang Lima, Semarang
    • Hotel Ibis Malioboro, Yogyakarta

     

    Permintaan Brosur penawaran Training silahkan Menghubungi kami via :

    Mobile : 0823 2326 5005 – 0857 2459 5005

    Email : trainingcenterindo@gmail.com / info@jadwaltraining.co.id

    Blog : https://informasitrainingdanseminar.wordpress.com

    Web: www.informasitraining-indonesia.com

    Web www.jadwaltraining.co.id

Health and Safety at Work

Training Health and Safety at Work

Training di Bandung Training di Yogyakarta Training di Surabaya Training di Balikpapan Training di Batam Training di Lombok Training di Semarang Training di Bali Training di Pekanbaru Training di Solo Training di Medan Training di Makassar Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017

Permintaan Brosur penawaran : Public Training Register disini | In-House Training Register disini

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Health and Safety at Work

Overview

Course duration: 1 day.

A one-day course providing you with an essential overview of health and safety issues and current legislation.

This intensive and informative course provides delegates with an understanding of current health and safety legislation and provides practical options on how best to manage health and safety effectively in the workplace.

It has been updated in line with recent legislation and changes to application in the workplace in line with recommendations from the Health & Safety Executive (HSE).

Is it right for me?

Suitable for all staff responsible for, or needing to increase their awareness of, health and safety at work.

What will I learn?

By the end of this course you will be able to:

  • Understand the health and safety requirements in the workplace for your organisation.
  • Review health and safety policies in your organisation.
  • Set up a structure for a safety management system.
  • Put in place safety monitoring techniques.
  • Put in place accident prevention techniques.
  • Understand the detail of RIDDOR.
  • Demonstrate an up-to-date understanding of health and safety legislation.

What will it cover?

Health and Safety Law

  • Health and Safety at Work Act 1974 and associated regulations
  • Employers’ and employees’ legal responsibilities
  • Duty of care
  • Maximum penalties under the Act
  • Civil law

Management of Health and Safety at Work

  • Adopting a safety culture
  • Safety management systems – the Plan, Do, Check, Act approach
  • Principles of sensible risk management
  • Carrying out a risk assessment

Workplace Regulations

  • Management of Health and Safety at Work Regulations 1999
  • The Manual Handling Operations Regulations 1992, as amended in 2002
  • Control of Substances Hazardous to Health (COSHH) Regulations 2002
  • Health and Safety (Display Screen Equipment) Regulations 1992
  • Personal Protective Equipment at Work Regulations 1992
  • Electricity at Work Regulations 1989
  • Regulatory Reform (Fire Safety) Order 2005
  • Health and Safety (First aid) Regulations 1981
  • Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR)

Accident Prevention and Investigation

  • Understanding accidents – changing attitudes and behaviours
  • Principles of accident prevention
  • Creating a safe working environment
  • Principles of active and reactive monitoring
  • Accident investigation and reporting
  • Requirements under Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR)

Fundamentals of Hazard Identification and Practical Risk Assessment

Training Fundamentals of Hazard Identification and Practical Risk Assessment

Training di Bandung Training di Yogyakarta Training di Surabaya Training di Balikpapan Training di Batam Training di Lombok Training di Semarang Training di Bali Training di Pekanbaru Training di Solo Training di Medan Training di Makassar Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Fundamentals of Hazard Identification and Practical Risk Assessment

Course Description

This two-day course addresses the topic of the potentially hazardous situations we face every day. Often the consequences of hazards are not severe or they are presented in a form we are familiar with so we are able to effectively cope with them. The ability to recognize hazards, assess their potential severity and place controls to mitigate the severity is fundamental to a safety design and workplace. By understanding the basic types of hazards, participants will be able to conduct effective workplace hazard assessments and develop safeguards/controls to reduce or eliminate their severity. Common process hazards will be examined in detail. Participants will understand the difference between a hazard and a risk, the components of risk, and be provided a sound fundamental base for future Process Hazard Analysis learning. In addition, how to determine probability, the importance of the “As Low As Reasonably Possible” concepts, and various risk assessment methodologies will be presented.

Course Outline

The Hazard Management Model
Natural Hazards, Conflict Based Hazards, Technological Hazards, Safety Hazards
Fire and Explosion Hazards
Tools for Hazard Identification, Evaluating Hazards
Risk Assessment Concepts
The Risk Analysis Process
Determining Probability
Analysing Consequences
Risk Acceptability/Tolerability
Risk Assessment Methodologies
Comparison of Techniques

PHA/HAZOP Leadership Workshop

PHA/HAZOP Leadership Workshop

Training di Bandung Training di Yogyakarta Training di Surabaya Training di Balikpapan Training di Batam Training di Lombok Training di Semarang Training di Bali Training di Pekanbaru Training di Solo Training di Medan Training di Makassar Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

PHA/HAZOP Leadership Workshop

Course Description

This three-day PHA/HAZOP course will teach participants how to efficiently and effectively plan and execute Process Hazards Analysis (PHA) studies. This includes understanding the principles behind each of the major PHA methods (HAZOP, What-if, Checklist, FMEA), dealing with challenging personalities within the SIL team, and avoiding common pitfalls and traps. The course is geared to PHA/HAZOP team leaders and scribes, health and safety professionals, Loss Management specialists, and engineers responsible for PHA studies.

Course Outline

Course Objectives
Quantitative and Qualitative Hazard Analysis
Overview of HSE Hazard Management
Elements of Facility Risk
Process Hazard Analysis Methods
PHA Documentation Issues
PHA Leadership
Practice Studies

Training OIL POLLUTION

Training OIL POLLUTION

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training OIL POLLUTION

DESCRIPTION

Bagi Engineer, Geologist, Business Development dalam bidang pertambangan dan geologi, pemahaman tentang Oil Pollution sangat penting. Melalui pelatihan ini, peserta akan mendapatkan pengetahuan dan pemahaman tentang Overview of Marine Oil Spill: Sources of Spill ; Responses ; The effects; Litigation ( Study from Tanker Accident : MT Exxon Valdes; MT Torrey Canyon; MT Athos.); IMO and its Committees relate to Marine Pollution, Marine Pollution Prevention. Regulation on Marine Pollution ; Marpol 73/78; OPA, Definitions; Oil Record Book; IOPPC; Survey; Equipment; Oil Discharge Requirements; Fate of Oil Spills in the Marine Environment; Types of Oil; Properties; Behavior; Spreading; Evaporation, hingga Chemical Dispersion. Application techniques; Precaution; Conclusion, Shore-Line Clean Up; Method; Final Cleaning; Organization and management of work forces; On Land Oil Spill; Disposal Techniques for Oiled Soil, Waste Storage & Disposal.; Disposal method; Direct disposal; Burial; Destruction; Incineration. Harapannya adalah, agar setelah mengikuti pelatihan ini, peserta dapat meningkat kompetensi teknisnya, dan dapat lebih berkonrtribusi lagi bagi peningkatan kinerja perusahaan.

MATERI
1. Overview of Marine Oil Spill: Sources of Spill ; Responses ; The effects; Litigation ( Study from Tanker Accident : MT Exxon Valdes; MT Torrey Canyon; MT Athos.) ;
2. IMO and its Committees relate to Marine Pollution.
3. Marine Pollution Prevention. Regulation on Marine Pollution ; Marpol 73/78; OPA. Definitions; Oil Record Book; IOPPC; Survey; Equipment; Oil Discharge Requirements;
4. Fate of Oil Spills in the Marine Environment; Types of Oil; Properties; Behavior; Spreading; Evaporation.
5. Effect of Oil on Marine and Coastal Resources; Ecological Effects; etc.
6. Site and Responder Safety; Safety and Health consideration.
7. Response Planning; Situation Evaluation and Response Options; Environment Consideration; Surveillance. Containment and Recovery of Oil; Booms & Booming Techniques; Deployemen techniques in Tidal River, channel and estRecovery devices; Recovery system; Sorbents.: Requirement; Performances; Applications; Recovery; Storage. Sampling Techniques.
8. Chemical Dispersion. Application techniques; Precaution; Conclusion.
9. Shore-Line Clean Up; Method; Final Cleaning; Organization and management of work forces; On Land Oil Spill; Disposal Techniques for Oiled Soil.
10. Waste Storage & Disposal.; Disposal method; Direct disposal; Burial; Destruction; Incineration.

PESERTA
Engineer, Geologist, Business Development dalam bidang pertambangan dan geologi, dan siapa saja yang membutuhkan training ini.

Quality Management System

Training Quality Management System

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Quality Management System

WHO SHOULD ATTEND

This short course will develop the participants’ knowledge and skills to successfully engage in the management of the company, applying the basics that are based on management systems.

 

COURSE OBJECTIVES

At the end of this course, participants will be able to:

  • Understand the Principles of Integrated Management Systems
  • Learn what a Strategic Planning is
  • To know how an organization is focused on Business Process Management
  • Identify the Policy, Objectives and the Integrated Documentation in an Organization
  • To establish the benefits of systems integration

CONTENT

  • Basic concepts related to Quality, Environment, Safety and Health
  • Principles of Integrated Management Systems
  • Strategic Planning
  • Operation of the systems
  • Relationship Organization – Stakeholders
  • Process Management
  • Building Integrated Policy
  • Construction of Integrated Goals and Objectives
  • Integrated Documentation
  • Advantages of Systems Integration

INTENDED FOR

Managers, Supervisors, Safety, Health, Environment and Quality Professionals, Technical and personnel involved with Safety Management Systems, Environment and Quality

 

DURATION

3 days

Hazardous Material Management

Training Hazardous Material Management

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Hazardous Material Management

WHO SHOULD ATTEND

This short course is intended for all personnel who will come in contact with hazardous material in the course of their day to day work

COURSE OBJECTIVES

This course will equip delegates with skills to take adequate action to establish controls for every aspect involving hazardous substances, from their selection all the way through to their eventual disposal. The main objective of this course is to sets out these controls. Delegates learn about the selection, purchase, transport, use, storage and disposal of hazardous materials.

CONTENT

  • Selection and Purchase of Chemical Products
  • Chemical Product Information
  • Instructions
  • Labelling and Packaging
  • Handling and Transportation Storage
  • Storage Areas
  • Use and Mixing
  • Disposal
  • Definitions

INTENDED FOR

All personnel assigned and dealing with the hazardous material within the Company

DURATION

3 days

Basic Hazardous Chemical Handling

Training Basic Hazardous Chemical Handling

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Basic Hazardous Chemical Handling

 WHO SHOULD ATTEND

This short course is intended for all personnel involved or assigned to a process facility within the oil and gas industry.

COURSE OBJECTIVES

  • Provide a basic understanding of how to use Companies chemical information system to:
  • Identify, handle, use, or respond to a spill involving a hazardous material at any worksite.
  • Know where to get information about proper handling, storage and disposal of hazardous chemicals.
  • Know what to do when a hazardous chemical leaks or spills.

 

CONTENT

  • What are chemicals?
  • How chemicals can affect you?
  • Systems of Identification
  • Workplace Hazardous Material Information System
  • National Fire Protection Association
  • Chemicals(Hazard Information & Packaging for Supply)
  • HazCom
  • Placards
  • Material Safety Data Sheet
  • Labels
  • Your key to a safe work place
  • How do chemical accidents happen?
  • Emergency Response
  • Conclusions
  • Excersises

INTENDED FOR

All personnel assigned to a process facility in Oil and Gas Industry

 

DURATION

3 days

Process Safety (PHA)

Training Process Safety (PHA)

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Process Safety (PHA)

WHO SHOULD ATTEND

This short course is intended for all engineers engaged in the oil industry, involved in Reservoir Engineering, especially those responsible for the elaborate plans for Reservoir Development.

COURSE OBJECTIVES

  •  Introduce process safety and establish its role in today’s industry
  •  Introduce skills in the recognition of process safety hazards
  •  Introduce skills in the control of process safety hazards
  •  Provide process safety management skills for Supervisors, Engineers, Facility Managers,  etc
  •  Introduce process safety management techniques
  •  Define process safety management

CONTENT

  •  Written Program
  •  General
  •  Facility Planning Requirements
  •  Employee Involvement
  •  Process Safety Committee
  •  Incident Investigation
  •  Process Safety Information
  •  Facility/Dept. Evaluation
  •  Process Hazard Analysis
  •  Process Operating Procedures
  •  Employee Training
  •  Use of Contractors
  •  Pre-Startup Safety Review
  •  Mechanical Integrity
  •  Quality Assurance
  •  Non-routine Work Authorization
  •  Managing Change
  •  Emergency Preparedness

INTENDED FOR

Facility Engineers, Process Engineers, Reservoir Engineers, Safety Committees, Process Specialist, Corporate Managers, Department Managers, First Line Supervisors, Accident Investigation Team members

DURATION

3 days

Permit to Work (PTW)

Training Permit to Work (PTW)

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Permit to Work (PTW)

WHO SHOULD ATTEND

This short course is intended for all personnel assigned to a facility where Oil and Gas process is in place

 

COURSE OBJECTIVES

To ensure that the working group (personnel) is informed, aware and can more easily understand the risks they face on the job along with the methods to be applied to work in a safe and controlled manner.

SPECIFIC OBJECTIVES

•  Prescribe the nature and extent of the work.

•  Establish responsibilities of the assigned personnel within operations.

•  Prescribe the conditions that have to be observed.

•  Provide maximum safety of both personnel and plant, Also a good co-ordination between operations and maintenance work.

 

 

CONTENT

  • Introduction to Permit to Work System
  • Objectives of the System
  • Responsibilities of Concerned Delegates
  • Types of Permits
  • Initiation and Distribution
  • Validity of Permit and Work Completion
  • Withdrawal and Cancellation
  • Isolation of Pipelines and Vessels
  • Electrical Isolation
  • Rules and Regulations Related To The System
  • Toolbox Meetings
  • Auditing of the Permit  to Work System
  • Closure

 

INTENDED FOR

Managers, Team Leaders, Superintendents, Area Authority, Performing Authority, Supervisors, Welders, Electricians, HSE Professionals

DURATION

3 days

Incident Investigation

Training Incident Investigation

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Incident Investigation

WHO SHOULD ATTEND

This short course is designed for personnel responsible for incident investigation.

COURSE OBJECTIVE

To provide attendees the appropriate tools so as to apply Technical and Logical Analysis regarding Event Investigation, also to help identify and control the risks associated to the different processes within Oil and Gas Industry. Main objective also covers the administration of means so as to avoid incident occurrence that may affects health and safety of personnel, surrounding environment where operations takes place, company and contractors as well as reputation.

SPECIFIC OBJECTIVES

 

  • Learn the Purpose of Incident Investigation
  • Learn how to set up, manage & participate in an investigation
  • Learn Evidence Preservation Techniques
  • Learn Interviewing Techniques
  • Learn How to Analyze the Causes of Incidents
  • Learn How to Establish Root Cause
  • Learn How to Make Recommendations to Prevent Incident Recurrence
  • Learn How to Write and Present Investigation Reports
  • to review the incident investigation process
  • to provide some practical techniques for use in participating or leading an investigation

 CONTENT

  • Defining Terms
  • Example of the randomness of loss outcomes
  • Near-Miss
  • Management Control of Loss
  • Why investigate incidents?
  • Immediate Causes
  • Basic Causes
  • Root Causes
  • Standard Terminology
  • Types of Incidents
  • Incident Reporting
  • Why Report Incidents?
  • The Accident Triangle
  • Risk Assessment and Incident Investigation
  • Continuous Improvement Processes
  • The Investigation Hierarchy
  • Incident
  • Case Study # 1: Injury to Employee
  • Kicking off the Investigation
  • The Investigation Team
  • Investigation Process
  • Steps to Conducting an Investigation
  • Energy Flow & Barriers
  • Summary
  • Sequence of Events (Timeline)
  • Preservation of Evidence
  • Interviewing  Techniques
  • Contributing Factors
  • Human Factors
  • Case Study # 2 : Team Exercise
  • Analyzing to Root Cause
  • Key Points About Root  Cause  (fault tree) Analysis
  • Root Cause Analysis:  The How / Why Tree
  • Findings and Conclusions
  • The Incident Report and Recommendations
  • Making Appropriate Recommendations or Corrective Actions
  • Investigations – Things to Avoid
  • Presentations Tips
  • Small Group Exercise
  • Lessons Learned
  • Formal Investigation Report
  • Case Study # 3: Team Exercise

INTENDED FOR

Managers, Team Leaders, Superintendents, Area Authority, Performing Authority, Supervisors, Welders, Electricians, HSE Professionals

DURATION

3 days

Basic Fire-Fighting

Training Basic Fire-Fighting

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Basic Fire-Fighting

WHO SHOULD ATTEND

This short course is intended for all personnel assigned to a facility where Oil and Gas process is in place

COURSE OBJECTIVES

The aim of this course is to provide the most comprehensive and current techniques so as to effectively fight a fire. Training complies with the NFPA standards worldwide recognized. Theoretical and practical classes involve trainees in the effective way to prevent, recognize and extinguish different types of fires that may occur within Oil and Gas Industry.

 

SPECIFIC OBJECTIVES

  • Provide clear understanding of duties.
  • Ability of the attendee to identify hazards & perform remedy action.
  • Identify & skillfully operate fire protection equipment.
  • Capable to competently respond to mitigate & control emergency cases.
  • Proper use & handling of PPE.
  • Conduct atmospheric gas testing and appropriately don the SCBA

 

 

CONTENT

  • Introduction
  • The Theory of Fire
  • Common Ignition Sources
  • The Classification of Fire
  • Types of Extinguishing Agents
  • What is a Portable Fire Extinguisher?
  • Identifying the Proper Fire Extinguisher
  • Using the Fire Extinguisher
  • When not to fight a Fire
  • Inspecting a Fire Extinguisher
  • Fire Prevention
  • Fire Protection
  • R. A. C. E.
  • Closure

 

INTENDED FOR

All personnel assigned to a facility where Oil and Gas process is in place

 

DURATION

3 days

H2S Awareness and Breathing Apparatus

Training H2S Awareness & Breathing Apparatus

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training H2S Awareness & Breathing Apparatus

Who Should Attend

This short course is intended for all personnel assigned to an Oil & Gas facility where gas may be present.

Course Objectives

The training course aims to provide knowledge, skills, and confidence to respond appropriately to a H2S release as well as recognition of an emergency and provide the knowledge for the proper use of emergency equipment and procedures to enhance survival whenever a gas release is in place.

This course complies with National Fire Protection Association 204 and the American Conference of Governmental Industrial Hygienists (ACGIH).

Specific Objectives

Sources; hazards; properties and characteristics of H2S and SO2; proper use of detection equipment (personal or portable gas monitors); recognizing and responding to alarms; location of muster points; symptoms of exposure and biological effects; rescue techniques and first aid; proper storage, use and maintenance of the respirators; limitations and capabilities of the respirators; practical donning, operational checks, and doffing of the respirators; recognizing and responding to respirator malfunction and emergency situations; and recognizing medical signs that may prevent or limit the user from wearing a respirator.

Content

  • Introduction
  • Properties of Hydrogen Sulfide
  • Hazards of Hydrogen Sulfide
  • Detection and Monitoring
  • Emergency Alarms
  • Personal Protective Equipment
  • Wind Direction Indicators
  • Escape Routes And Procedures
  • Handling of Breathing Apparatus (Theory/Practice)
  • Safety Rules and Procedures
  • Closure

 Intended For

All personnel assigned to an Oil & Gas facility where the gas may be present

Duration

3 Days

Working at Heights

Training Working at Heights

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Working at Heights

WHO SHOULD ATTEND

This short course will equip participants on safety guidelines to follow when carrying out work at height in order to control the risks of falls and is suitable for every employee who would be exposed to working at height in the course of their day to day duty.

COURSE OBJECTIVES

At the end of this course, participants will be equipped to use the best methods and tested in the execution of work at height. After completing this training course each participant will be able to:

  • objectively define the responsibilities and competencies of a worker located in high places
  • know and use mooring systems and equipment to prevent falls

CONTENT

  • Introduction: Tool-Box-Talk, General Rules, Objectives
  • Definition and Safety Issues and organizational culture
  • Safety and Environment Concepts, examples, exercises identifying safety deviations and unsafe conditions.
  • Setting National legislation on safety and health, conceptual basis
  • Accidents and accident rates
  • Work at height, conceptual basis, risk factors, prevention, legislation
  • Scaffoldings Basics Exercises

INTENDED FOR

Employees linked to the processes areas where required basic knowledge of the techniques and rules for working at heights is needed. Workers engaged in the assembly and maintenance of scaffolding, workers involved in the execution of work at height, using scaffolding or platforms, and those exposed to the risks and hazards typical of these activities

DURATION

3 days

Supervising Safety

Training Supervising Safety

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Supervising Safety

WHO SHOULD ATTEND

This short course is intended to improve the skills and knowledge of those who have responsibility to achieve company wide HSE policy.

 

COURSE OBJECTIVES

  • Incidents prevention, Prevent Road Accidents/Incidents
  • Detect/Report/Correct Unsafe Acts/ Conditions
  • Train Personnel in Safety Awareness
  • Establish Clear understanding of HSE Responsibilities

CONTENT

  • HSE Policy
  • HSE Training Program
  • Safety Committee
  • MSDS Responsibilities
  • Supervisors HSE Responsibility
  • Employee HSE Responsibility
  • First Aid Program
  • Responsibilities and Checklists in safety inspections
  • New employees induction Responsibilities
  • Security Guide for Employees
  • Prevention and control of risks
  • Hazard Communication Program
  • Maintenance Schedule
  • Personal Protective Equipment
  • Occupational Health Program
  • Accident Investigation
  • Emergency Plan
  • Inspections and external audits
  • Registration and activities SHA accident
  • Leadership and management commitment,
  • Safety, environment and occupational hygiene:
    Risk Analysis; Change Management; Operational procedures, safe work practices; HSE subcontractors; Mechanical Integrity, Compliance with laws, rules and standards Emergency response and control;  Education and training; Review Pre-start; Investigation of Accidents and incidents and occupational diseases; Evaluation system.

 

INTENDED FOR

Managers, Team Leaders, Superintendents, Area Authority, Performing Authority, Supervisors, Welders, Electricians, HSE Professionals

DURATION

3 days

Human Kinetics and Manual Handling

Training Human Kinetics and Manual Handling

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Human Kinetics and Manual Handling

WHO SHOULD ATTEND

This short course will develop the participants’ basic understanding and techniques of the proper methods of Human Kinetics and Manual handling

COURSE OBJECTIVES

At the end of this course, participants will be able to identify the parts of the spine and the risks associated with manual handling of loads, so it will be able to apply the technique of lifting and hygiene-related back. They will also be able to:

  • Understand the proactive vision of ergonomics
  • Identify risk factors when lifting a load
  • Identify risk factors when performing repetitive movements
  • Apply simple ways of lifting and loading manual explain the best way to make an effort
  • To understand the functioning of the spine and related pathologies known manual lifting
  • Understand the biomechanical function of the body associated with possible illnesses  caused by repetitive motion.

CONTENT

  • History of injury related to manual handling of loads
  • Load Handling and related anatomy
  • Table of weights
  • Risk factors
  • Load Characteristics
  • Procedure for lifting
  •  Warm-up exercises, muscle strengthening and relaxation

INTENDED FOR

Personnel connected with the manual handling of loads

DURATION

3 days

Available on Request

Training Confined Space Entry

Training Confined Space Entry

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Confined Space Entry

WHO SHOULD ATTEND

This short course is intended for all employees required to enter confined or enclosed spaces as it proposes a comprehensive program that would prevent different situations that may occur during the performance of a task in confined spaces.

 

COURSE OBJECTIVES

The course takes into account all aspects of personal and engineering, emergency preparedness, knowledge, evaluation and control of risks, responsibilities and functions, as well as first aid. At the end of the program the participant will know how to identify confined spaces according to their classification and use appropriate and specific procedures to enter them, by observing all safety measures.

CONTENT

This course will equip delegates on common hazards of Confined Spaces; basic entry requirements; specific procedures and important facts; nature of the hazards; necessary precautions to be taken; use of protective and emergency equipment. The steps are broken into the following:

 

  • Introduction
  • General Requirements
  • What is a Confined Space?
  • What is a Permit Required Confined Space
  • Important Definitions
  • Typical Confined Spaces
  • Potential Hazards in Confined Spaces
  • Controlling Confined Space Hazards
  • Responsibilities
  • Entry Point Hazards
  • IDLH
  • Ventilation Needed
  • Atmospheric Hazards
  • Oxygen Deficient
  • Asphyxiating Atmospheres
  • Oxygen Enriched
  • Flammable Atmospheres
  • Toxic Atmospheres
  • Flammability, Oxygen and Toxicity Values    Regarding Confined Space Work
  • Physical Hazards
  • Draft Slide To Review
  • Mechanical Hazards
  • Electrical Hazards
  • Temperature Hazards
  • Worker Comfort
  • Engulfment Hazards
  • Noise Hazards
  • Surface Hazards
  • Vibration Hazards
  • General Precautions When Entering a CE
  • Risk Assessment
  • Basic Confined Space Entry Procedure
  • Testing The Atmosphere
  • Ventilation
  • Lockout / Tagout
  • Rescue Team
  • Specific Requirements (Audio Explanation)

 

INTENDED FOR

All employees required to enter confined or enclosed spaces

DURATION

3 days

Instructor

ANDRIANSYAH & Teams
HSE Training Instructor/Trainer & Consultant
Education
  • Master Degree, 2001
  • St. George International University, London-UK
  • Major: Business Administration,
  • Strata Degree (BSc), 1999
  • Universitas Islam Bandung, Bandung-Indonesia
  • Major: Mining Engineering,
  • Diploma Degree, Thomson, 2002
  • Scranton-USA,
  • Certified Personal Trainer, 2002
  • National Academic for Sport Medicine, USA

Training Job Safety Analysis (JSA)

Training Job Safety Analysis (JSA)

Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017  Venue : Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak, Batam.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Job Safety Analysis (JSA)

WHO SHOULD ATTEND

This short course is designed for personnel responsible for managing and performing high risk operations.

COURSE OBJECTIVES

At the end of this course, participants will be able to:

Ensure compliance with Country Laws relating to Risk

Meet the corporate policy & requirements (e.g. Target Levels of Safety)

Ensure that operating facility hazards are identified and their potential impact assessed / mitigated

Ensure that all facility changes are assessed from risk / safety perspective

Follow requirements for Risk Management as lifecycle process established by Company HSE MS, Element “Risk Management”;

Describe how to initiate, carry out and complete risk assessment process that is mandatory for all Company operations, facility changes and projects

Provide users with guidance and reference for performing HSE risk assessment task and using different hazards evaluation, risk assessment and management techniques

 

CONTENT

  •  Basic definitions
  •  What is risk?
  •  Incidents & Accidents
  •  Reduce likelihood of incidents/accidents
  •  ALARP
  •  Introduction to HSE Risk Management
  •  Risk Assessment (Three Levels of Tools)
  •  Co-ordinating Risk Assessment Roles
  •  Responsibilities (General)
  •  Excersises

INTENDED FOR

Safety Committees, Corporate Managers, Department Managers, First Line Supervisors, Accident Investigation Team Members, Personnel performing high risk operations

DURATION

5 days

Training Process Control and Safeguarding

Training Process Control and Safeguarding

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Process Control and Safeguarding

Introduction

There is a trend for the Process Control industry to treat safety as an important priority and install a variety of safety equipment and systems. However, advances in technology and standardization suggest that plants take a fresh look at their safety systems. Major latest advances include of fieldbus systems featuring an approved safety bus and the integration of the safety instrumented system (SIS) with the process control system. These advances and associated standards are the driving forces for a renewed approach to Safeguarding a Process Control system.

However, designing effective safeguarding mechanisms requires an understanding of the entire process, safety requirements and solutions, international standards, process control, and fieldbuses. Using fieldbuses for safety and integrating the safety system with process control systems are relatively new concepts in the process industry.

Traditional fieldbus networks aren’t suitable for safety-related controls. However, specialized fieldbus systems that incorporate safety as an integral component of the network are already available, e.g., PROFIsafe.The majority of fieldbus systems use a “black channel” approach to their safety communications bus. This means that only one physical layer channel is used for both, normal communications and communications involving safety functions that involve additional checks and balances to meet additional safety requirements and protections. These enhancements make the bus a “safety bus” and, in many cases, allow sharing infrastructure between that safety bus and conventional control communications.

This seminar covers the fundamentals of safety and the major approaches for assuring system safety for process control. The approaches include integrated system, separate system, fieldbus solutions, intrinsic safety, functional safety, process control design solutions, safety instrumented system (SIS), safety alarms, and international standards.

Seminar Objectives

  • This programme is designed to provide engineers, managers, and technicians with an overview of safety systems as it relates to process control systems.
  • Cover both, intrinsic and functional safety solutions
  • Discuss safety integrity levels (SILs) and techniques to achieve them

 Training Methodology

This programme has been designed for both novice and experienced engineers and technicians.  The training methodology is a combination of Instructor presentations and case studies. This is followed by a series of videos involving safety in process control systems. This is complemented by Instructor led workshops with active delegate participation. Throughout the programme, delegates will learn through active participation using review exercises and questionnaires of each major topic.

Who Should Attend?

  • Professionals involved in designing, selecting, specifying, installing, testing, operating and maintaining safety systems for process control.
  • Professionals involved in safeguarding process control systems of any kind.
  • Any professional needing to get to grips with the ever expanding and complex field of safety in the industrial plant environment:

 – Automation Engineers
–  Chemical Engineers
– Consulting Engineers
– Electrical Engineers
– Electricians
– Industrial IT specialists
– Installation and maintenance technicians
– Instrumentation and Control Engineers
– Maintenance Engineers
– Process Engineers
– Process Operators
– Production Managers
– Project Managers
– System Integrator
– Other professionals who want a better understanding of the subject matter

Programme Outline

1 –

  • Review of process control, instrumentation, and fieldbus
  • Process control systems
  • Control algorithms: PID controller
  • Intelligent (Smart) sensors and transmitters
  • Control valves and actuators
  • Fieldbus systems
  • Foundation Fieldbus
  • Profibus PA

2 –

  • Dependability concepts: Reliability, Availability, Safety, Security
  • Safety Systems in Process Control and Instrumentation
  • Safe design
  • Device failures, communication failures, control failures
  • Failure modes: fail operational, fail safe
  • Error detection and avoidance mechanisms
  • Safety instrumented systems (SIS)
  • Automatic response
  • Risk management
  • Safety Standards: IEC 61508/61511, ANSI/ISA-84, ISA18.2
  • Safety integrity levels (SIL)
  • Layers of protection analysis (LOPA)

3 –

  • Fieldbus safety solutions (Intrinsic Safety)
  • Implementation Options: Integrated system Vs Separate system
  • Implementation option benefits
  • FISCO
  • Safety with Foundation Fieldbus
  • Safety with Profibus PA
  • Safety with PROFIsafe

4 –

  • Process control safety solutions (Functional Safety)
  • Achieving target SILs
  • Safe control system design
  • Safety-related controls.
  • Safety control loops
  • SIS Protocol
  • SIS Function Blocks
  • SIS Diagnostics

5 –

  • Testing
  • Process Alarms & Operator intervention
  • Emergency shutdown
  • Safety approvals
  • Economic analysis
  • Programme summary

Training Advanced Health and Safety Management

Training Advanced Health and Safety Management

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Advanced Health and Safety Management

Introduction

Who does not want to be part of a winning team? Everyone wants to be on a winning team but the emphasis is on team. Therefore all the players must work together to create a win-win outcome. This requires the input the theoretician the practitioner and the implementer.

Safety Management has come under considerable scrutiny in the light of recent disasters. However the concept of Safety Management Systems is usually limited to the systematic approach and not to the holistic (all aspect) approach. Safety Management must encompass both the hard and soft aspects of safety to produce an exceptional outcome. Health and Safety has to be managed with the same degree of expertise and to the same standards as other core business activities because of the high cost of failures; Legislation requiring employers to assess and manage risks; Public opinion on risk acceptability moving against poorly managed organizations which impose excessive risks and high profile disasters which fuel public opinion

The seminar will cover:

  • Legislation
  • ‘Successful Health and Safety Management’ (HSG 65)
  • COSHH and Hazard Communications
  • Risk assessments & HAZOP studies

Seminar Objectives

Participants attending the Seminar will understand:

  • The necessity to manage health and safety with the same degree of expertise and to the same standards as other core business activities
  • Understand the Legislation in Indonesian for High Hazard Industries
  • How Safety Culture is involved in a SMS
  • The effect of Behavioural safety on safety culture
  • Work Permit Systems & LO / TO
  • Risk perception and HAZOP studies

Training Methodology

The seminar is presented using power point presentation and videos. Case studies further enhance the learning outcome. Active participation will be encouraged so that participants can gain through the personal experiences of the group.

Organisational Impact

The organisational impact will be that the employees participating in this seminar will:

  • Gain increased professionalism
  • Understand the internationally accepted standards for H&S management systems
  • Be able to improve their present working systems
  • Have the capability to reduce accidents in the workplace
  • Accept that team working is of the highest importance
  • Have the capacity to increase profitability

Personal Impact

Upon Completion of this course, participants will have gained:

  • An understanding of the different types of Safety Management systems
  • A familiarity of the Legal basis for H&S Management
  • An appreciation of how a Policy affects the strategy in Health and Safety
  • The understanding of how to organise a H&S Management System
  • Knowledge in evaluating the performance of Health and Safety
  • The basics of the HAZOP process

Who Should Attend?

This seminar is a practical guide for professionals involved in improving health and safety in their organisation. As a team effort in developing and maintaining a Safety Management system this is important for the following disciplines:

  • Managers
  • Professionals of all fields
  • Supervisors
  • Team Leaders
  • Safety Professionals
  • Employee Representatives

Programme Outline

1 – Legislation for Health and Safety

  • Introduction
  • Legislation for Health and Safety
  • Legislation for High Hazard Industries
  • Process Safety Management (OSHA 29 CFR 1910.119)
  • The Seveso Directive (EU Directive)
  • Introduction to Safety Management Systems
  • The Outer System Environment
  • The Inner System Environment

2 – Policy and Safety culture

  • Policy for Health & Safety
  • Responsibility for accidents rest with management
  • Organisational factors
  • Human Factors
  • Job Factors
  • Organisation for health and safety
  • Control, Co-operation, Communication, Competence
  • Safety Culture

3 – Planning and Implementation

  • Planning and Implementation
  • Management arrangements
  • Risk Control Systems – Inputs, Processes, Outputs
  • Risk Assessments
  • Work Permit Systems & LO / TO
  • Hazard Communication
  • COSHH Assessments
  • Exercise

4 – Measuring Performance & HAZOPs

  • Measuring Performance
  • Active Monitoring systems
  • Reactive Monitoring systems
  • Audits & Reviews
  • Introduction to HAZOP
  • Element selection
  • Exercise

5. – Behavioural Safety

  • Taylor, Herzberg, Vroom, Geller, Maslow
  • ABC analysis – Antecedents, Behaviour and Consequences
  • Natural penalties and consequences
  • Identifying critical behaviours
  • Observing behaviours
  • Feedback on observations
  • Case study

Training Safety Audit and Site Inspection

Training Safety Audit and Site Inspection

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Safety Audit and Site Inspection

Introduction

“What you do not measure you cannot improve on”. All Safety Management Systems (SMS) require a systematic organized, thorough, and competent assessment of how well efficient and effective the systems are working. The Safety systems must not only reflect the aspirations of the Company but also be in line with the National Legislative requirements. A competent Auditor will be able to critically examine the SMS and identify weakness and suggest improvements where necessary. A safety audit is a systematic critical examination of an organisation’s health and safety, involving a structured process including the use of questions and the examination of documentation, to collect independent information with the aim of assessing the effectiveness and reliability of the system.

Workplace Inspections are undertaken by supervisors and involve the physical inspection of equipment and activities of a workplace looking both for unsafe conditions and unsafe acts. The results of Inspections result in short reports of findings made and suggestions for improvements.

In this programme you will learn to:

  • Conduct effective Company and Contractors Safety Audits
  • The importance of pre audit questionnaires
  • Appreciate the legal aspects of audits
  • Improve your knowledge on safety issues
  • Gain skills in undertaking site inspections

Seminar Objectives

Participants attending the programme will:

  • Understand the legal background
  • Appreciate all Audit activities
  • Gain knowledge about the elements of a Safety Management system
  • Successfully undertake site inspections
  • Assess the Safety Culture of the organization
  • Evaluate the Emergency Plans of the Organisation

Training Methodology

Participants will learn by active participation during the programme through the use of exercises, case studies and open discussion forums. Power point  shown will encourage further discussions. The programme will be run using power point slide, copies of which will be distributed both in hard and soft copies.

Organisational Impact

 The Organisation sending staff to this seminar will gain from:

  • Staff being able to undertake audits and prepare audit reports
  • The professional development of staff
  • A reduction in incidents
  • Staff equipped to carry out effective site inspections
  • Personnel able to sample behavioural and physical aspects of the site and its workers
  • Inspectors being sure of what areas require further controls

Personal Impact

  • Confidence in conducting Audits
  • Understanding the legal background
  • Appreciate how risk assessments may be evaluated
  • Improved knowledge on safety issues
  • Be familiar with the requirements of HS(G)65, ILO OHS 2001, OHSAS 18001
  • Be able to assess the safety culture of the organisation

Who Should Attend?

  • All supervisors and line management who have assigned responsibilities within the organisation’s Safety Management System (SMS)
  • Maintenance personnel
  • HSE personnel
  • Staff involved in Contractor work

Programme Outline

 1 – Introduction to Audits, Legislation & Contractors

  • Introduction to safety audits and inspections
  • The Legal Aspects
  • Seveso, COMAH and PSM 1910.119
  • Construction Design & Management (CDM) regulations & ILO C-167
  • Directive 92/57/EEC – temporary or mobile construction sites
  • Contractor Selection & Induction
  • Risk Management & Risk Assessments
  • Evaluating Risk Assessments

2 – Elements of a Safety Management System – Audits

  • Types of Safety Management Systems
    • Mechanical Model
    • Socio Technical Model
  • Elements of Safety – Management Systems
  • SMS Policy – Elements of SMS policy statements
  • Proactive and reactive monitoring of performance
  • Measurement Techniques
  • The Auditors’ qualifications
  • Audits
    • Pre Audit Activities
    • On Site Activities
    • Post Audit Activities
    • Classification of Findings

3 – Inspections

  • Observation Techniques
  • Specific audit / inspection systems – physical inspection of the site
  • Confined Space Entry
  • Lifting Equipment
  • Work at height
    • Scaffolding
    • Ladders
    • PPE
  • Chemicals
  • Fire Assessment
  • Work Permit Systems

4 – Safety Culture

  • Safety Culture and Behavioural Safety
  • Motivation – Taylor, Herzberg, Vroom, Gueller, Maslow
  • Natural Penalties and Consequences
  • ABC Analysis
  • What drives behaviour
  • Natural penalties and consequences
  • Auditing the Safety Culture
  • Improving the Culture

5 – Emergencies

  • Internal Emergency Plans
  • External Emergency Plans
  • Auditing emergency plans
  • Audit Reports
  • Seminar Review
  • Evaluation

QHSE Awareness and Implementation of ISO 9001, 14001 & OHSAS 18001

Training QHSE Awareness and Implementation of ISO 9001, 14001 & OHSAS 18001

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training QHSE Awareness and Implementation of ISO 9001, 14001 & OHSAS 18001

Introduction

This seminar introduces the principles of Quality, Health & Safety and Environmental (QHSE) Management Systems and how the three (3) respective standards of ISO 9001, ISO 14001 and OHSAS 18001 can be implemented.

Key highlights of the seminar are:

  • Background to the standards and the benefits
  • Key elements
  • Implementation of the Management Systems
  • The roles and responsibilities of the individuals concerned.
  • Tools and techniques for identifying and resolving issues

Seminar Objectives

By the end of this seminar you will be able to:

  • Have a better understanding of the standards and terminology used.
  • Understand how the process for implementation of the standards works
  • Understand your own specific role and responsibilities as well as other members of your team
  • Be familiar with tools and techniques for detecting and solving problems revealed during site inspections and audits.
  • Be able to prepare for and assist with an independent certification assessment and surveillance visits.
  • Develop a culture for continuous improvement within the organisation

Training Methodology

The seminar uses a range of approaches to learning, including experiential group activities, individual exercises, mini-case studies, and role plays. A key part of the learning process is sharing the differing experiences participants bring, as well as experimenting with some new techniques.

Organisational Impact

  • Much better time and resource allocation – leading to better organisational and individual performance
  • Use of a well proven process which is recognised internationally
  • More effective implementation of existing systems
  • Introduction of new processes to improve efficiency

Personal Impact

  • Increased career flexibility
  • Accelerated problem resolution for all QHSE management systems related issues
  • Far greater motivation and pro-activity
  • Exposed to a range of perspectives on quality, health, safety and environment by sharing examples of best practice and together solving real and simulated team performance issues.
  • Practice new and sometimes challenging techniques will build flexibility and confidence in harnessing the power of the team.

Who Should Attend?

Professionals, Senior Management with responsibilities for implementation or maintenance of ISO and OHSAS standards, Heads of Departments including Quality, Health & Safety and Environment Managers who wish to see how all three standards operate together, Section Heads and Supervisors who wish to complement both their understanding of the ‘bigger picture’ of their organisation and its context, and their ability to lead QHSE teams.

Programme Outline

Background to the standards and the benefits

  • When did they first originate?
  • Why were they considered necessary?
  • The benefits associated with each standard
  • Individual and integrated systems
  • Pros and cons for implementation

Key elements

  • The standards clauses
  • Comparisons
  • Common procedures
  • Legal requirements

Implementation of the Management Systems

  • How do you start?
  • Key stages of implementation
  • Objectives and requirements for the project;
  • Establishing processes, documents and resources specific to the project;
  • Review of the requirements related to the project and ensuring thatthe organization has the ability to meet the defined requirements.
  • Results of the review and actions arising from the review.

 

The roles and responsibilities of the individuals concerned

  • Who does what?
  • Quality roles and responsibilities
  • Health & Safety roles and responsibilities
  • Environmental roles and responsibilities
  • Combined roles and responsibilities

Tools and techniques for identifying and resolving issues

  • Verification, validation, monitoring, measurement, inspection and test activities specific to the project and the criteria for project acceptance;
  • Records needed to provide evidence that the realization processes and resulting project meet requirements
  • Review of contents of seminar manual

Training Hazardous Waste Management and Pollution

Training Hazardous Waste Management and Pollution

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Hazardous Waste Management and Pollution

Introduction

Improper storage of hazardous chemicals- both products and wastes-incompatible inspection of containment materials, using hazardous products when non-hazardous products are available and inadequate training of staff are some of the leading causes of environmental contamination. Contamination can come in many forms- Some examples of contamination are ground and surface water, land, air, radioactive, food, noise, molds, odor, construction, vibration. etc and invariably, if these contaminants are not properly dealt with, will result in pollution and in certain situations serious health problems. This course will give some details on these various types of contaminants and the new frontiers in eliminating or minimizing these contaminants, the use of effective non-hazardous products in your company and also environmentally acceptable methods of disposal for both hazardous and non-hazardous wastes.

Seminar Objectives

  • Learn about the various types of contamination and which ones are more applicable to your company
  • Encourage and facilitate dialogue with like minded individuals on specific contamination issues of concern in their organizations and the opportunity to develop regional networks within the GCC area to address common concerns
  • Learn about the relevant environmental treaties dealing with contamination and pollution
  • Learn how to prioritize contamination problems in dealing with contamination and waste management issues in a logical sequence.
  • Show and emphasize the close relationship between human health and the environment that’s been directly affected by contamination
  • Discussion of the current methodologies for the cleanup of contaminated soil, ground and surface water, air pollution, construction materials  and radioactive materials

Training Methodology

The seminar will encourage delegates’ participation, and the atmosphere in the classroom will be tailored to asking questions and the delegates will all be made to feel welcome in a stress free atmosphere. Both a power point slide presentation and videos will be used. Class exercises will also be used to reinforce the information discussed.

Organizational Impact

  • The organization , based on the training received by its employees at the course, will have less cause for concern of real or potential contamination problems at the plant, and this usually results in improved productivity
  • By addressing real or potential contamination problems from the company’s operations, the whole audit management process (system audits, process audits, review audits, surveillance audits, re-registration audits etc) will be made easier and less stressful
  • If contamination should occur, reduced healthcare costs for the organization knowing that contamination issues are fully addressed and managed,
  • If contamination should occur, reduced cleanup costs for the organization knowing that contamination issues are fully addressed and managed
  • Enhanced reputation of the organization in the community knowing that there will not be any surprise contamination issues that could derail the organization’s image
  • An improved image of the organization with the Regulatory Authorities

Personal Impact

  • Personal satisfaction of the employee knowing that the organization is providing the necessary information required for him/her to minimize and/or manage workplace contamination
  • Risk Reduction knowledge which will provide lasting benefits both personally and professionally
  • Safer workplace environment
  • Personal psychological advantage of an employee doing his or her part concerning contaminants reduction via “Think Globally, Act Locally”
  • Personal pride in being an employee of an organization that’s fully committed to addressing and managing real or potential contamination issues
  • Personal pride in being part of an organization that’s committed to protecting the environment and preventing pollution

Who Should Attend?

  • Health & Safety Environmental Professionals
  • Staff responsible for managing hazardous wastes
  • Staff responsible for contamination issues
  • Laboratory Technicians
  • Staff wishing to reduce risk and liability arising from contaminating and polluting events
  • Technical assistants and anyone who has a role to play in environmental matters of the Organization
  • Emergency Personnel

Programme Outline

Brief History of Contamination and Introduction to Hazardous Wastes

  • What is contamination and how does it affect us?
  • A detailed look at all the various types of contamination
  • Global Environmental issues related to contamination
  • International Environmental Treaties and Guidelines related to Contamination
  • The toxic 12 chemicals and the role of the United Nations Environment Program (UNEP)
  • The current watch list for chemicals that soon may be added to the toxic 12
  • Environmental Law and its significance
  • Definition of hazardous Wastes & Non -Hazardous Wastes
  • Connecting the dots between Contamination and Hazardous Wastes

Management of Contamination and Hazardous Wastes

  • The relationship between Contamination and Occupational Health & Safety
  • The importance of documentation in Hazardous Waste Management
  • Some typical Hazardous Waste Regulations and the need for harmonization
  • The purpose of a Workplace Hazardous Materials Information System (WHMIS)
  • The purpose of a Material Safety Data Sheet (MSDS)
  • Why a Globally Harmonized System (GHS) is essential for WHMIS and MSDS
  • Carrying out a Contamination Audit
  • Managing a Waste Disposal Site
  • Class Exercise

Contamination and Pollution Prevention

Discussions on common contamination sources from the contamination audit, sources of pollution and techniques and technologies to prevent or minimize them

  • Exploration & Production- Refining & Transportation
  • Oil Spills with special reference to the April 2010 Gulf of Mexico oil slick occurrence
  • Modern Tanker design to minimize the occurrence of a major oil spill
  • Other oil related sources of pollution
  • The common thread amongst many third world countries concerning pollution issues
  • The current concepts of Zero Waste (ZW) and Zero Liquid Discharge (ZLD) and their limitations
  • The Bird Problem- Pollution from bird droppings and dead birds and the latest available technologies to control this problem
  • Class Exercise

Continuation of Contamination and Pollution Prevention Planning and Contingency Planning for major incidents

  • Life Cycle Management of all materials being used in a company
  • The 5R’s- Reduce, Reuse, Recycle, Recover and Rethink
  • Detailed requirements for proper storage of hazardous materials
  • The importance of on-going training
  • The importance of regular reviews of emergency plans
  • Updated information on ISO 14001, 18001 and 9001
  • Types of Environmental Audits
  • Discussion of some major preventable accidents

Big picture review of the Management and Prevention of Contamination and Hazardous Wastes

  • HAZID ( HAZard IDentification)
  • HAZOP (HAZard & OPerability)
  • Environmental Ethics
  • Examples of Environmental Ethics from the Instructor’s personal experiences
  • Climate Change update and its significance for the Gulf Coast Countries
  • A complete course review with some generic recommendations including Greening your Company at a reasonable cost

Training Risk Assessments, Methods Statements and Quality Plans

Training Risk Assessments, Methods Statements and Quality Plans

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Risk Assessments, Methods Statements and Quality Plans

Introduction

This seminar introduces the principles of Risk Assessments, Method Statements and Quality Plans.

Key highlights of the seminar are:

  • Preparation of Risk Assessments, Method Statements and Quality Plans
  • Key elements for quality, health & safety and the environment
  • Satisfying client contractual requirements and legal compliance
  • The roles and responsibilities of the individuals concerned

Seminar Objectives

By the end of this seminar you will be able to:

  • Have a better understanding of the terminology used.
  • Understand how the process for implementation works
  • Understand your own specific role and responsibilities as well as other members of your team
  • Be familiar with the practical application.
  • Be able to prepare Risk Assessments, Method Statements and Quality Plans.

Training Methodology

The seminar uses a range of approaches to learning, including experiential group activities, individual exercises, mini-case studies, and role plays. A key part of the learning process is sharing the differing experiences participants bring, as well as experimenting with some new techniques.

Organisational Impact

  • Use of a well proven process
  • More effective implementation of existing systems
  • Improved confidence
  • Introduction of new processes to improve efficiency

Personal Impact

  • Increasing career flexibility
  • Accelerated problem resolution for all related issues
  • Exposed to a range of perspectives by sharing examples of best practice
  • Practicing new techniques will build confidence.

Who Should Attend?

Professionals, Senior Management with responsibilities for implementation of contracts, Heads of Departments including Quality, Health & Safety and Environment Managers who wish to see how all three subjects operate together, Section Heads and Supervisors and anyone else who wishes to increase their understanding of risk assessments, method statements and quality plans.

Programme Outline

Day 1 – Introductions

Experience in the 3 subjects

The links between Quality, Health, Safety and the Environment

  • Practical applications
  • Best practice

Questionnaire

Day 2 – Risk Assessments

  • Background and benefits
  • Principles
  • The Health & Safety Executive Five steps and other methods

How to assess the risks in your workplace:

  • Step 1 – Identify the hazards
  • Step 2 – Decide who might be harmed and how
  • Step 3 – Evaluate the risks and decide on precautions
  • Step 4 – Record your findings and implement them
  • Step 5 – Review your assessment and update if necessary

Roles and responsibilities

Competence                                                                                                          

Method Statements

  • Background and benefits

What goes into a Method Statement?

What are Method Statements and how do I write them?

Examples

  • Roles and responsibilities
  • Competence
  • Methodology
  • Practical applications
  • Best practice

 

Quality Plans

  • Background and benefits
  • Correspondence between ISO 10005 and ISO 9001
  • Development of a Quality Plan
  • Contents of a Quality Plan
  • 19sub- sections
  • Review, acceptance, implementation and revision
  • 4 sub-sections
  • Practical applications
  • Best practice

Review of the day
Questionnaire

Training Environmental Monitoring and Modelling : Environmental Management Systems – Best Practices in Obtaining ISO14001 Certification

Training Environmental Monitoring and Modelling : Environmental Management Systems – Best Practices in Obtaining ISO14001 Certification

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Environmental Monitoring and Modelling : Environmental Management Systems – Best Practices in Obtaining ISO14001 Certification

Introduction

As concern grows for continually improving the quality of the environment, organizations of all types and sizes are increasingly turning their attention to the environmental impacts of their activities, products and services. The environmental performance of an organization is of importance to internal and external interested parties. Achieving sound environmental performance requires organizational commitment to a systematic approach and, to continual improvement of an environmental management system (EMS).

The purpose of this course is to provide delegates with the opportunity of gaining the skills and knowledge to develop, implement and/or improve an Environmental Management System (EMS).

Seminar Objectives

By the end of this seminar delegates will be able to:

  • Understand the different types of environmental aspects and their environmental impacts
  • Understand the requirements of the environmental management standard ISO 14001:2004
  • Develop and implement an Environmental Management System (EMS)
  • Prepare a plan for obtaining EMS ISO 14001:2004 certification from a certifying authority
  • Identify all the waste stream types and, the opportunities for recycling of waste

Training Methodology

Delegates will learn by active participation through inspiring presentation tools and interactive techniques presented in a lively, enthusiastic and interesting style. Delegates will take part in practical team exercises, typical case studies and open discussion forums, as related to their own organisation’s operational activities.

Organisational Impact

  • The organisation will benefit from the key financial savings as a direct result of implementing an effective environmental management system
  • The organisation will also benefit from being able to identify the environmental aspects and impacts, so reducing the risk from environmental incidents occurring

Personal Impact

  • Delegates will be able to better understand the nature of environmental aspects and the associated impacts within the organisation’s operational activities
  • Delegates will understand the purpose and role of the international standard for environmental management ISO 14001:2004

Who Should Attend?

  • All line professionals, supervisors and those who are involved with environmental matters
  • Production, maintenance and process engineers and all environmental personnel
  • All personnel involved in purchasing and managing hazardous substances

Programme Outline

Day 1 – Introduction to Environmental Management

  • What Does the Term ‘Environment’ mean
  • Benefits of Good Environmental Management
  • Key Environmental Management System (EMS) Elements
  • Document Framework for an Environmental Management System

Environmental Management Systems

  • Environmental Policy
  • Concepts of the Environmental Standard ISO 14001:2004
  • Initial Environmental Review (IER)
  • What are Environmental Aspects and Impacts
  • Exercise: Producing an EMS Document Framework

Environmental Aspects & Impacts

  • Understanding Environmental Impacts
  • Understanding Global, Regional and Local Environmental Issues
  • How to Determine Significant Environmental Aspects
  • Identifying Applicable Regulatory and Standards’ Requirements
  • Exercise: Preparing an Environmental Impact Assessment Checklist

Environmental Impact Assessment (EIA)

  • Elements of the EIA Process
  • Carrying out an EIA
  • Analysis of Impacts
  • Exercise: List the Steps of an EIA Process

Internal Environmental Auditing

  • Carrying Out an Environmental Audit
  • Management Review Process
  • Summary of Seminar Key Points

Training Safety Technology and Risk Management

Training Safety Technology and Risk Management

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Safety Technology and Risk Management

Introduction

As technological systems become more complex it becomes increasingly difficult to identify safety hazards and to control their impact. Plant Managers and Engineers are becoming more aware that safety and risk touch on every aspect of the day to day running of their Plants and engineering and process systems if they are to comply with ever changing and demanding International, and National environmental and economic values and standards.

Unsafe systems can result in monies being lost due to accidents, disruption to production, criminal and civil prosecutions, loss of market share, and the degradation of company assets and the environment.

The highlights of this seminar are as follows:

  • Introduce to the delegate the practical ways of safety engineering and risk assessment systems
  • Methods and techniques in eliminating, mitigating and controlling major hazard situations and conditions.
  • Using well established principles defined by International and professional bodies such as IChemE ( Institute of Chemical Engineers), developed and formulated over many years and further established from learning from major accidents.
  • Provide the delegate with a working knowledge of the proactive and reactive processes by which quantifiable assessments can be used to assess and control risks.

Seminar Objectives

The overall objective is to ensure that participants are familiar with the concept of reliability and fundamentals of risk assessments. The seminar has been designed to enable delegates upon completion to be able to:

  • Apply the principles of hazard identification and assessment of risk to processes and machinery
  • Understand reliability concept and use of failure tracing methods
  • Demonstrate a practical understanding of a quantitative risk assessment technique and the date required for records
  • Advise management on the most effective control methods based on the evaluation of risk
  • Identify the general requirement for development of safe system of work
  • Recognise relevant International Standards for Reliability and Machinery Safety

Training Methodology

The seminar shall be presented by a combination of interactive lectures, videos, and knowledge and understanding further established by way of a number of syndicate group exercises.

Organisational Impact

  • Professional development of staff; the organisation should be able to prevent accidents and minimise losses through improved reliability and safety.
  • Awareness of tried and tested International practical principles to make quantifiable decisions to assist in evaluating risks from engineering options.
  • Enable the delegate to apply the principles of safety engineering and risk assessment back at his or her workplace by putting into practice the practical knowledge gained from the course
  • Help promote the importance of ongoing monitoring and reviewing of safety systems

Personal Impact

  • Promotes a proactive attitude within the individual to hazard analysis
  • Introduce the proactive concept and benefits of safety engineering and hazard / risk assessment analysis
  • Help to recognise the range of the key factors to be considered in the process of hazard and risk assessment analysis
  • Introduce the delegate to the methods and techniques for evaluation hazards across a variety of industry sectors
  • Enlighten the delegate to the importance of continued learning from accidents and incidents

Who Should Attend?

  • Plant Professionals
  • Engineers
  • Designers
  • All Professionals who has a contribution to make in ensuring the safe operation of a potential high hazard workplace.

Programme Outline

Hazard Identification

  • Introduction and course overview
  • Why do we need safety engineering
  • Examples of major disasters
  • The safety system process
  • Hazard identification
  • Hazard control
  • Criteria for risk tolerability
  • Hazard Identification Techniques
  • Design out hazards
  • Safety standards codes , national and international
  • Safety analysis in engineering
  • Safety analysis in Chemical process
  • Safety analysis in manufacturing

Risk Assessment Techniques

  • Safety Management
  • Safety in system life cycle
  • Hazard identification check-list
  • Process, workplace, work equipment risk assessment
  • Task-based risk assessment
  • Introduction to HAZOP

Machinery and Work Equipment Safety

  • Machinery hazard identification
  • Causes and methods for machinery accident prevention
  • HAZOP examples
  • Failure modes, human factors and software safety
  • Conducting a failure mode and effective analysis
  • Human factors safety analysis
  • Performance and human error
  • Human factors and safety analysis

Reliability Technology

  • Types and causes of failures
  • Methods of preventing failure
  • Types of maintenance and inspection regimes
  • Reliability of components and systems
  • Design and reliability of control systems
  • Design and reliability of protective systems
  • The concept of ‘HIPS’
  • Safety Integrity Levels ‘SIL’ selection

Consequences Analysis

  • Mechanics of fire, explosion and toxic releases
  • Dispersion modelling software
  • Types of fire: flash, jet, cascading fires and BLEVE
  • Types of explosion
  • Quantification of risk
  • Event Tree Analysis ‘ETA’
  • Seminar Summary
  • Seminar Review

Training Advanced Process HAZOP

Training Advanced Process HAZOP

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training disini

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Advanced Process HAZOP

Introduction

It is universally recognised that for any Company to succeed it must take a proactive approach to risk management. Over the last few years Companies and a number of Countries legislators have been focusing on Process Safety as a method to reduce the risks posed by hazardous industries. Process Hazard Analysis (PHA) is recognised as being a critical tool in the implementation of a successful risk management system.

As Hazard and Operability (HAZOP) studies are now recognised world-wide as being the qualitative risk assessment methodology of choice in the Process Industries, there will be additional focus on this specific aspect of Process Hazard Analysis.

In this programme the delegates will learn:

  • How to apply advanced risk assessment techniques
  • Mechanics of dispersion, fire, explosion and toxic releases
  • The concept of Quantified Risk Assessment “QRA”
  • Hazard and Operability (HAZOP) study methodology
  • HAZOP team leadership

Seminar Objectives

Delegates attending this programme will:

  • Understand the concepts of Risk Assessment and Risk Management
  • Understand the estimation and evaluation of risks – Qualitative, Semi-Quantitative and Quantified Risks
  • Techniques for Hazard Identification and Analysis – Check-Lists, Risk Profiling, HAZOP, FMEA and Task-Based Risk Assessment
  • Cause-Consequences Analysis – The Role of Fault Trees and Event Trees in Accident Prevention
  • Understand HAZOP studies their benefits and their short comings
  • Understand the requirements of a Team Leader or Facilitator, scribe and team members during HAZOP studies
  • Be able to facilitate a HAZOP study

Training Methodology

Participants will learn by taking part in exercises, syndicate and group workshops, as well as looking at case studies and real life situations.

Organisational Impact

In addition to the professional development of staff, the organisation should be able to prioritise resources to demonstrate that process risks are adequately controlled

Personal Impact

Attendees will be able to apply skills learnt from this training at a practical level to identify sources of major hazards and to prioritise decisions for their control

Who Should Attend?

  • HSE Technical personnel
  • Project Engioneers
  • Maintenance personnel
  • Process Engineers involved in design and modification
  • Instrumentation and Control Engineers

Programme Outline

Introduction to Risk Assessment

  • Seminar introduction: delegate and tutor introductions; course objectives
  • The concepts of hazards, risk and risk assessment
  • Methods for risk evaluation
  • Integrating risk assessment within Risk Management
  • Qualitative, Semi-Quantitative and Quantitative Risk Assessment methodologies

Risk Assessment Techniques: HAZOP

  • Introduction to hazards identification and analysis techniques
  • Techniques for hazard identification and analysis – HAZOP
  • Where and when to use HAZOP and the requirements for a successful HAZOP study
  • Team composition for HAZOP studies
  • Guide words and process variables used for HAZOP studies
  • Syndicate exercise – application of HAZOP to relevant processes

Hazop Leadership Techniques

  • HAZOP team leader/facilitator requirements
  • HAZOP scribe requirements
  • Facilitating HAZOP studies, do’s and don’ts
  • Information required to allow successful HAZOP studies
  • Case study where each delegate has the opportunity to facilitate a HAZOP meeting
  • Review of commercial software used for HAZOP and Management of Change ‘MOC’

Consequence Analysis

  • Theory behind fire, explosion and toxic dispersion modelling utilised in Quantitative Risk Assessments
  • Types of fires and their effects on people and equipment
  • Types of explosions and their effects on people and equipment
  • Review of software available for consequence calculations

The Role of QRA

  • Introduction to Quantified Risk Assessment “QRA”
  • The role of Event Tree Analysis in scenario development
  • The role of Fault Tree Analysis for multi-causation analysis
  • Applications for ETA and FTA
  • Failure data for use in QRA’s
  • Societal Risk and Individual Risk
  • Review of software available for Quantitative Risk Assessments
  • Programme review and the way ahead

Training Developing an Effective Safety Culture

Training Developing an Effective Safety Culture

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training disini

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Developing an Effective Safety Culture

Introduction

An effective safety culture is widely accepted as being the essential component of in the successful development and implementation of an organisation’s safety management system. Preventing major accidents is about ensuring that everyone, regardless of position, follows safety procedures and safe practices – by always intervening when unsafe behaviours or conditions are observed. A safety culture improvement process approach which actively engages everyone through personal responsibility is seen as the way forward.

In this seminar you will learn:

  • The impact of an effective safety culture on achieving good safety management
  • How to establish a safety culture improvement processes and identify behavioural change improvement opportunities
  • The importance of actively caring
  • How to assess the safety culture of the organization
  • About Taylor, Herzberg, Vroom, Geller & Maslow

 Seminar Objectives

Participants attending the programme will:

  • Have a clear understanding of human factors and their application to their organisation’s current safety cultural status
  • Be familiar with elements of safety management systems and their purpose
  • Appreciate the consequences of behavioural acts and omissions as prime causes of accidents and emergency situations
  • Be able to develop a step-by-step safety cultural improvement programme within their own organisation
  • Develop an appreciation of carrying out an HSE cultural positional assessment
  • Develop skills for identifying, evaluating and reconciling solutions for influencing behavioural change improvement measures

Training Methodology

Participants will learn by active participation during the programme through the use of exercises, case studies and open discussion forums. Videos shown will encourage further discussions and delegates are encouraged to bring forth experiences and problems from their own organisations. The programme will be run using power point slide, copies of which will be distributed both in hard and soft copies.

Organisational Impact

  • Professional development of staff
  • Improved communications
  • Improved safety behaviour
  • Reduction in incidents
  • Practical steps for changing culture
  • Leaders better equipped to face adversity of incidents head on

Personal Impact

  • Understand the integrated approach of Safety Culture
  • Be able to assess the safety culture of the organisation
  • Practical methods to improve safety behaviour
  • Appreciate the needs, drives and motivation of staff
  • Develop a SMS based on safety culture principles
  • The power of reinforcement and recognition

Who Should Attend?

  • All supervisors and line management who have assigned responsibilities within the organisation’s safety management system (SMS)
  • Production and process engineers
  • Maintenance personnel
  • HSE personnel
  • All personnel involved in planning and implementing the organisation’s HSE management system

Programme Outline

Integrated HSE & Business Management Systems

  • Safety culture and safety climate
  • Improving safety performance
  • Behaviour and Culture
    • Organisation factors
    • Job factors
    • Personal factors
  • Historical review
  • Case study

Safety Management Systems

  • Safety management systems framework and safety culture factors
  • Essential safety management system components
  • Developing an effective safety management system
  • Mechanical Model of SMS
  • Socio Technical Model of SMS
  • More safety culture factors
    • Risk and risk perceptions
    • Human error
    • Stress
  • Case Study “Mersin Refinery”

HSE Model for Safety Culture

  • Identifying problem areas
  • Dependant, Independent and Interdependent Cultures
  • Planning for change
  • HSE cultural change model
  • How to intervene
  • Key Performance indicators
  • Success factors and barriers
  • Attitude Questionnaires

Behavioural Safety

  • Safety culture and behavioural safety
  • Taylor, Herzberg, Vroom, Geller, Maslow
  • Natural penalties and consequences
  • ABC analysis
    • Antecedents
    • Behaviour
    • Consequences
  • What drives behaviour
  • Natural penalties and consequences

Assessing the Safety Culture

  • Establishing the current status of a safety culture
  • Results of questionnaires
  • Case studies from different organisations
  • Step change in safety
  • Managing people and their attitude to safety
  • Developing questionnaires
  • Personal action plans
  • Course review

Training Safety in Process Design

Training Safety in Process Design

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran : Public Training Register disini | In-House Training disini

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Safety in Process Design

Introduction

Safety in Process Design includes a wide range of subjects with many applications in Oil & Gas, Chemical and Process industries, related to hydrocarbons and chemical processing. This seminar provides an overview of important elements of process safety as they are often encountered in today’s industrial practice. The emphasis is on engineering design aspects of Process Safety Management and it will highlight the safeguarding aspects of processing equipment inside the plant. Techniques for analyzing and mitigating process safety hazards applicable to oil and gas processing will be reviewed. Integration of the concepts required to achieve an optimum approach to Process Safety Engineering is the main goal of this seminar. Exercises and useful examples will be utilized throughout the seminar to emphasize the key learning points.

Upon completion of this seminar, the delegates will learn:

  • Importance of the concept of “Inherently Safer Design”
  • Design principles based on Codes and Standards for safe operation of process equipment
  • Selection and sizing of safety valves and pressure relief systems
  • Common process hazards analysis methods: HAZOP, LOPA, FMEA
  • Detection and prevention methods for fire and explosion accidents
  • Plant Equipment Inspection (NDT) and Maintenance Procedures

Seminar Objectives

  • Comprehensive understanding of different aspects of process design that influence process safety
  • Ability to select an “inherently safer design” for the entire process plant operation
  • Knowledge on the mechanical structure integrity of process equipment
  • Familiarity with hazards associated with process fluids regarding material degradation
  • Experience with the Code requirements for sizing relief valves, methodology for determining the relief flows and handling the relief streams.
  • Knowledge of how to operate with emergency depressuring systems (EDP) system for prevention of fire and gas explosions

  Training Methodology

 The seminar will be conducted along workshop principles with formal lectures and interactive examples, which will result in the active participation of all delegates in discussions and teamwork. Real life examples will be selected to illustrate the efficient operation and potential technical failures as well as their root causes. The emphasis will be on troubleshooting the problems and maintaining plant safety. There will be ample opportunities for active, open discussion and sharing professional experiences on various safety issues. All seminar materials will be provided.

 Organizational Impact

On completion of this seminar the delegate will be able to critically analyse the safety methodologies employed within the organisation and instigate improvements where required. The knowledge gained in this seminar will:

  • Enable the delegate to optimise the operation of various components of equipment while maintaining safety of the plant
  • Give the delegate confidence to carry out risk minimization analyses on process equipment thereby avoiding failures
  • Enable measures to enhance equipment status for the given operating conditions
  • Give better handling of pressure relief system
  • Enable better specification of new and replacement of old elements of piping system
  • Allow tighter control of maintenance budgets by the avoidance of unplanned equipment failures in service

Personal Impact

  • Improved confidence when considering safety issues
  • Better understanding of how the process design impacts safety of the plant
  • Better grasp of maintenance and instrumentation on incident prevention
  • Improved personal knowledge of risk and hazard analysis
  • Better ability to troubleshoot difficult and hazardous situations
  • Confidence and ability to select the appropriate depressuring plan thereby improving reliability and personal profile to senior management

Who Should Attend?

  • Engineers and technicians in oil & gas, chemical and process industries
  • Process, mechanical and chemical engineers
  • Engineers and technicians who deal with reactors and piping systems
  • Design engineers, project engineers and HSE managers
  • Control, automation and instrumentation engineers
  • Operators and maintenance personnel

Programme Outline

Overview of Safety in Process Design

  • Definition of Safety in Process Design
  • Overview of Historical Incidents and Problem Areas
  • Components of Process Safety: People, Plant, Process
  • Risk Identification and Safety Analysis
  • Process Hazard Analysis: HAZOP, LOPA, FMEA
  • Hazards Associated with Specific Plant Systems
  • Elimination of Hazards through Process Design
  • Prevention of Human Error through Process Control and Monitoring

Inherently Safer Design

  • “Inherently Safer Design”  Methodology
  • Pre-Design and Design Phases
  • Materials of Construction and Optimized Fabrication
  • Hazard Associated with Process Fluids and Chemical Reactions
  • Corrosion, Erosion and Material Degradation
  • Leakage and Loss of Primary Containment
  • Dispersion of Hydrocarbon Release
  • Flammability of Chemicals

Safety of Process Equipment

  • Hazard Associated with Process Equipment
  • Safety Considerations in Reactor Design
  • Design Procedure for Safety of Pressure Vessels, Storage Tanks, Reactors, Heat Exchangers
  • Venting of Tanks and Vessels: Codes, Standards and Best Practices
  • Piping System Design and Safety
  • Design of Piping System Accessories: Valves, Fittings, Supports
  • Assessment  of Material Degradation during In-Life Cycle: Fitness for Service
  • Monitoring, Testing and Inspection (NDT)

Design of Pressure Relief Systems

  • Design of Safety Valves
  • Operation  of Pressure Relief System
  • Calculation and Sizing of Relief Loads of Pressure Relief Systems
  • Pressure Relief Valves vs. Rupture Discs
  • Codes, Standards and Best Practices
  • Specifics of Pressure Relief Systems for Pumps, Compressors, Turbines
  • Process Plant Disposal Systems
  • Disposal Hazards, Risk Assessment and Environmental Factors

Process Monitoring and Control

  • Safety Instrumented Systems
  • Process Plant Monitoring and Control System: SCADA
  • Emergency Depressuring Systems (EDP)
  • Prevention of Fire and Gas or Dust Explosions
  • Safety Consideration in Plant Layout and Equipment Spacing
  • Management of Change and Integrity Operation Window
  • Plant Equipment Inspection and Maintenance Procedures
  • Final Conclusions

TRAINING OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT

TRAINING OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Permintaan Brosur penawaran :

  • trainingcenterindo@gmail.com
  • seminarcenterindonesia@gmail.com
Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

TRAINING OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT

Failure to put SMART health, safety and environmental policies and procedures in place could be an expensive mistake.  The illnesses and accidents risked as a result could bring a range of costs, including:
•    The wages of the person who is injured or ill
•    The costs of covering their job
•    Lost productivity caused by inexperienced replacements and disruption to business
•    Damage to products, equipment or premises
•    Costs of investigating and correcting the problem
•    Fines and legal costs if there is a prosecution
•    Cost of revamping damaged corporate image

Course Contents
DAY ONE

•    Introduction to safety at work
•    Risk assessment
•    Accident concepts
•    Implementation of health and safety in projects
•    Accident investigation and reporting
•    HSE Management System (including OHSAS 18001:2007) and its implementation
•    Hazard identification and control
•    Application of job hazard analysis
•    First Aid and CPR
•    Fire Safety Management

DAY TWO
•    Implementing OSH management system for success
•    Injuries: a matter of probabilities
•    HSE calculations
•    HSE performance indicators
•    Loss Time Injury Frequency (LTIF)
•    Understanding workplace ergonomics
•    Workplace interactions
•    Ergonomic risk factors
•    MSDs and other common problems
•    Ergonomics of computer usage
•    Techniques of Lifting of weights

FASILITY

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint,  including jacket or T-shirt, Flashdisk 8 Gb, Dinner, City Tour etc,  Convenient training facilities in Three, four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training,Certificate & Photo.

Peraturan Perundangan Lingkungan Hidup dan Cara Pemenuhannya

Training Peraturan Perundangan Lingkungan Hidup dan Cara Pemenuhannya

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Peraturan Perundangan Lingkungan Hidup dan Cara Pemenuhannya

DESKRIPSI

Munculnya Undang-undang 32 Tahun 2009 tentang Perlindungan dan Pengelolaan Lingkungan Hidup (PPLH) menunjukkan bahwa penegakan peraturan dan hukum lingkungan semakin diperketat. Undang – undang tersebut mengamanatkan tanggung jawab yang besar bagi pemerintah (baik Pusat, Provinsi, Kabupaten dan Kota) maupun perusahaan.

UU 32 Tahun 2009 mengatur secara sistematis mengenai pengelolaan lingkungan mulai dari perencanaan, instrumen pengendalian, hingga sanksi. Terdapat penguatan dan penegasan aturan seperti AMDAL, fungsi PPLH-PPNS dan mekanisme penegakan hukum. Beberapa terobosan baru muncul dalam UU tersebut misalnya, mangenai izin lingkungan bagi perusahaan, penetapan inventarisasi serta perencanaan pengelolaan lingkungan bagi pemerintah, hingga sanksi untuk pejabat pemerintah.

Tanpa pemahaman yang memadai tentang hak dan kewajiban yang diatur dalam peraturan perundangan tersebut, sulit bagi perusahaan untuk menerapkan peraturan hukum tersebut, sehingga mudah terkena permasalahan pertanggung-jawaban lingkungan (environmental liability).

Dalam pelatihan ini akan dibahas mengenai : Pemahaman struktur, hierarki, dan substansi perundangan lingkungan, serta pemahaman peraturan lingkungan yang terkait dengan kegiatan usahanya dan mengetahui cara pemenuhannya & pemerintah dapat melakukan evaluasi pemenuhan regulasi.

POKOK BAHASAN

1. Struktur Peraturan Perundangan dan Prinsip Hukum Lingkungan,

2. Undang-Undang 32 Tahun 2009 tentang PPLH : Pencegahan pencemaran dan perusakan, penanggulangan dan pemulihan, Hak dan kewajiban, Pengawasan

3. Penegakkan Hukum Lingkungan: Administrasi, Pidana, Perdata, Proses Penegakan Hukum

4. Peraturan tentang Izin Lingkungan dan dokumen Lingkungan :

  • Jenis usaha wajib Izin Lingkungan,
  • Tahapan Dokumen Lingkungan,
  • Kompetensi Penyusun Amdal
  • Tahapan Penetapan Izin lingkungan

5. Peraturan Pengendalian Pencemaran Air,

  • Kelas Air,
  • Wewenang Pemerintah,
  • Baku Mutu,
  • Kewajiban Perusahaan,
  • Tata Cara Perizinan

6. Peraturan Pengendalian Pencemaran Udara,

  • Klasifikasi Pencemar Udara,
  • Pemantauan Udara Ambien,
  • Pengelolaan Emisi Udara

7. Peraturan Pengelolaan Bahan Berbahaya dan Beracun

  • Pengelola B3
  • Klasifikasi
  • Registrasi
  • Notfikasi
  • MSDS-Simbol-Label,
  • Kewajiban Pengelola,
  • K3 tentang B3

8. Peraturan Pengelolaan Limbah B3,

  • Potensi LB3,
  • Identifikasi LB3,
  • Pengelolaan LB3,
  • Kewajiban Pengelola,
  • Penyimpanan,
  • Simbol,
  • Label,
  • Dokumen

9. Peraturan Pengendalian Pencemaran & Kerusakan Laut,

  • Peraturan Baku Mutu,
  • Baku Kerusakan,
  • Tanggung jawab perusahaan

10. Pengelolaan Gangguan : Kebisingan, Getaran, Kebauan

PESERTA

Karyawan/staff hingga level Manager dari latar belakang Safety & Health Environment/Lingkungan Perusahaan, Process Engineer, Chemical Dept.,  Operator pengolahan limbah, dan semua bagian yang terlibat dalam pengolahan limbah dan pemerhati ataupun praktisi yang peduli terhadap lingkungan.

METODE TRAINING

Presentation, Discussion, Case Study, Evaluation

FASILITY

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint,  including jacket or T-shirt, Flashdisk 8 Gb, Dinner, City Tour (Yogyakarta and Bandung) etc,  Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training,Certificate&Photo.

ISO Maritime Standards

Training ISO Maritime Standards

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training ISO Maritime Standards

Learning Outcomes

• Discuss how to apply Quality and Environmental Management Systems into a shipping company

• Explain how to apply an integrated management system for ISM Code, ISO 9000 and ISO 14000 into a shipping company as one management system

• Demonstrate how the listed standards work and can be applied in the industry and in particular to a ship management company

COURSE OUTLINE

• International Standards Organisation (ISO)

• Quality Management Systems

• Environmental Management Systems

• Occupational Health and Safety Management Systems (OHSMS)
• Information technology — Security techniques — Information Security Management Systems

• Energy Management Systems

• Social Accountability

• The environment and shipping – minimising the impact
• Costing in shipping companies and on board

• Working capital control in shipping management
• Capital project appraisal in shipping companies
• Introduction to ratio analysis

INSTRUCTOR TRAINING

Triyanto, Capt. R.I. M.Mar/ Team

Capt. R.I. Triyanto, M.Mar is an expert who was a lecturer at Marine Academy AKPELNI in Semarang. He is Instructor for Semarang Growth Centre, until at present, lecturing for Pelindo Pilot; Migas Mooring Master; Deep Sea Pilot; Ship Handling Simulator; Liquid Cargo Handling; Offshore Operations ; Maritime English; Crowd and Crisis Management; GMDSS; Radar Arpa; Safety, Survival etc.

Experience in Marine & Oil Terminal/ Port operation as Person in Charge in the port operation and facilities, Head of Marine and Terminal Product Movement, Act Superintendent, such responsible for Marine & Terminal Installation, maintenance and operation; Ship shore – Shore Loading Procedure; Oil and gas processing; Calibration such equipment; Co-work with official government.

Mooring Master/ Head of Mooring Master at Unocal (Indonesian–American Oil Company) at Santan Terminal. Master of various Ocean going vessels, (Bulk, Cargo, Tanker) from various national and foreign company, Indonesian and foreign flag vessels , running for Japan, Europe ,Middle East, Africa, Indonesia, South Asia, until 1979.

TRAINING METHOD

Presentation

Discussion

Case Study

Evaluation 

FACILITY

  • Module / Handout
  • Sertifikat
  • Training Kit
  • Souvenir
  • Dinner / City tour (Merapi Offroad/Prambanan/Borobudur/Wonosari Beach..etc) Pilih salah satu.

Training Marine Pollution Prevention and Management

Training Marine Pollution Prevention and Management

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Marine Pollution Prevention and Management

Preventing and managing the many causes and effects of marine pollution is a demanding and constantly changing responsibility for everyone involved in the maritime or offshore industries. Whether a seafarer, on-shore shipping personnel or involved in the offshore energy sector, it is all our duty to safeguard the marine environment.

This course provides a convenient solution and delivers a current, comprehensive knowledge of the overall framework governing marine pollution, including applicable regulations, compliance requirements and related management strategies. It presents an integrated approach, analysing the many sources of pollution, describing best practices for minimising contamination, responding to accidents and exploring legal ramifications throughout the maritime and offshore sectors.

Professional development over six carefully designed study module covering:

  • Pollution in Context: Causes and Effects, Governance, Regulations and Enforcement

  • Air Pollution and Greenhouse Gas Emissions

  • Ballast Water and Other Marine Pollutants

  • Oil Pollution and Offshore Activities

  • Measurement and Management Systems

  • Legal Issues, including Insurance and Compensation

The course also addresses the ever-expanding list of issues impacting the industry including:

  • Monitoring, reporting and verification of CO2 emissions

  • Low sulphur fuels within designated areas

  • Environmental and liability challenges in polar waters

  • More environmentally sound ship recycling

  • Sharpening of criminal liabilities for polluters

  • New regional and global measures

Instruktur

Dr. Ir. Viktor Malau DEA. (Associate Professor) dan Team

  • Doctor, Genie des Materiaux, Ecole Centrale de Lyon, France, France, September 1994 – September 1996

  • Master, Genie des Materiaux, Ecole Centrale de Lyon, France, France, September 1992 – October 1993

  • Undergraduate, Mechanical Engineering, Gadjah Mada University, Indonesia, August 1978 – April 1985

FASILITY

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint,  including jacket or T-shirt, Flashdisk 8 Gb, Dinner, City Tour (Yogyakarta and Bandung) etc,  Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training,Certificate&Photo.

Training Advanced Accident Investigation and Management

Training Advanced Accident Investigation and Management

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Advanced Accident Investigation and Management

Although international trends show a decline in the overall total number of accidental deaths and work place accidents, the associated financial costs, both direct and indirect, continue to rise. Many oil and gas companies continue to have employee accidents despite modern industry having the knowledge or know-how to prevent such accidents. There is an obvious requirement that those professionals undertaking enforcement or regulatory activities in a team must have competence to undertake efficient and analytical accident/incident investigations, which may in the course of due legal process be further examined and scrutinized by legal tests. This course has been designed to meet the requirements of Principle and Lead Regulatory and enforcement officers who are required to undertake competent accident investigations and examinations across a wide range of industries, including the hydrocarbon industry. The program includes practical exercises as well as a detailed review of accident events in oil and gas companies resulting in a fatality involving a number of hazard and risk profiles. A number of Root Cause Analysis (RCA) tools will be reviewed and applied during the course.

OBJECTIVES
  • Understand the roles and responsibilities of all those involved in accident/incident reporting and investigation and the methods used to monitor the implementation recommendations resulting from these investigations
  • Explain the causes of accidents and review and apply various accident causation models
  • Understand and appreciate the objectives of the various methodologies for undertaking the Root Cause Analysis (RCA)
  • Apply the role of RCA in the development of corporate occupational and environmental risk management systems
  • Apply the tools TOR and MORT to accident investigations including in a pro-active audit role

COURSE OUTLINE

  • Basic Safety Element and Components
  • Definitions
  • Accident/Incident Definition, Causation, and the Response to Defined Events
  • Role and Function of Lead Accident Investigators and Team Leading
  • Exploration of All Accident Types (Fire, Explosion, Vehicular, Electrical, Equipment Failure)
  • Indentifying, Gathering, and Recording of Evidence and Data
  • Assessing its Worth Relevant to Accident Investigation
  • Systematic Methods of Recording Evidence
  • Understanding Different Forms of Evidence
  • Actions to Be Taken at the Scene
  • Analysis of the Role of Human Factors Involvement in Accident Investigation
  • Compilation of Accident Reports and Remedial Action Plans
  • Use of Accident Investigations as a Management Audit Tool
  • Location and Definition of Operational Errors
  • Understand and Appreciate the Objectives and Various Approaches to Root Cause Analysis techniques and their Role in Hazard Confirmation
  • Validation of Effective Accident/Incident Reporting Systems
  • Interviewing Skills
  • Report Writing and Compilation and the Essentials of Producing Statements
  • Familiarization with Analytical Accident/Incident Investigation Tools (TOR & MORT)
AUDIENCE
This course is designed for but not limited to HSE Managers, PSM Managers, Team Leaders, Department Heads, and those involved with accident management and control in their company
Instruktur
Patisina, S.T.,M.Eng

Training Basic Drilling and Completion Operation With Health, Safety, Enviromental Consideration

Training Basic Drilling and Completion Operation With Health, Safety, Enviromental Consideration

Jadwal Training 2015,2016,2017 | Jadwal Seminar 2015,2016,2017 | Informasi Training 2015,2016,2017 | Informasi seminar 2015,2016,2017 Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember, Yogyakarta, Bali, Lombok, Jakarta, Bandung, Balikpapan, Solo, Semarang, Pontianak.

Kami menerima request waktu, tempat & fasilitas hubungi kami untuk informasi lebih lanjut.

Training Basic Drilling and Completion Operation With Health, Safety, Enviromental Consideration

TARGET & TUJUAN TRAINING :

Setelah menyelesaikan training ini diharapkan peserta dapat :

  • Memahami prinsip-prinsip dasar dan berbagai perhitungan sederhana untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan  perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.

  • Melakukan diagnosis sederhana dan memengerti penyelesaian (well completion) dan membuat suatu sumur minyak, gas atau panas bumi.

  • Membuat analisis sederhana terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran  kinerja dan merencanakan pengembangannya.

  • Melakukan perhitungan-perhitungan kuantitatip sederhana untuk perencanaan lumpur pemboran, semen, hidrolika, well control.

  • Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.

  • Pengetahuan tentang Peraturan Perundangan dalam K3L

  • K3L dalam Operasi Pemboran dan Workover

PESERTA YANG DIREKOMENDASIKAN :

Latar belakang  : Operator/Senior Operator/Engineer/Non Engineer

MATERI TRAINING 

Introduction : Rotary Drilling Operations

  • Steps to drilling a well

  • Types of rigs

  • Rig Components

  • Rig Systems

Rheology of Drilling and Completion Fluids

  • Equations and Inflow Performance RelationshipFunctions of Drilling/Completion Fluids

  • Fluid Types,

  • Fluid Models

  • Introduction to Rotary Viscometer

  • Other Testing Equipment

  • Objectives of Monitoring Fluids

Mud System

  • General Equations and ConceptsDiagnostic tests

  • Water based muds

  • Oil based muds

  • Additives

  • Mud handling system

Cementing

Tubing DesignFunctions of cement

Cement Types

Cement Additives

Oil Field Tubulars and Hydraulics

  • Drill string

  • Casing and tubing

  • Casing classification

  • Stresses on casing

  • Casing setting depth

  • Burst and collapse calculations

  • Wellheads

Drilling System – Pressure Loss Calculations

  • Hydrostatics

  • Buoyancy

  • Flow through pipes and annuli

  • Flow path

  • Pressure loss calculations

Drilling System – Bit & Nozzles

  • Hydrostatics Bit Types

  • Bit Parts

  • Bit Classification

  • Bit Nozzles

Introduction to Well Control

  • Hydrostatics Definitions

  • Causes of kicks

  • Kick indicators

  • Shut-in procedure

  • Well Kill Procedures

Directional Drilling

  • Reasons for directional wells

  • Planning Trajectory

  • Kickoff Methods

  • Survey Methods

  • Survey Calculations

Penyelesaian sumur (Well Completion)

Tipe-tipe penyelesaian sumur

  • Tipe penyelesaian sumur berdasarkan pemasangan pipa selubung

  • Tipe penyelesaian sumur berdasarkan jumlah zona produksi

Peralatan bawah tanah

  • Pendahuluan

  • Peralatan produksi bawah sumur

Penyelesaian sumur untuk sumur-sumur pengangkatan buatan

  • Sucker Rod Pump (Pompa angguk)

  • Electric Submersible Pump

  • Gas lift

  • Hydraulic Pump

  • Pompa Jet

Kerja ulang sumur (Work Over)

Faktor-faktor penyebab kehilangan produksi

  • Problem Reservoir

  • Problem mekanikal

Perawatan sumur

  • Kerusakan Peralatan

  • Masalah Parafin

  • Pengendapan Scale dan Pengontrolannya

  • Masalah Pasir

  • Kerusakan Formasi

Tipe-tipe Pengerjaan Kerja Ulang Sumur

  • Mengubah Zona Produksi

  • Perangsangan Sumur (Well Stimulation)

  • Squeeze Cementing

Peralatan Kerja Ulang

  • Menara (Rig) Konvensional

  • Unit Wireline

  • Gulungan Tubing Tanpa Sambungan (Endless Tubing Coil)

  • Unit Snubbing

Sand Control Technology

Sand Control Concept

  • Reason for Sand Control

  • Determining Need for Sand Control

  • Selecting Type of Control

  • Proper Drilling and Completion

Gravel and Screen Selection

  • Slot and Gravel Size Design

  • Slotted Liners

  • Screens

  • Prerpacks

Inside Gravel Packing

  • Perforation Packing

  • Two Stages Methods

  • Use of Viscous Carrying Fluid

  • Downhole Equipment

  • Type of Operation

  • Sigle Stage Methods

Open Hole Gravel Packing

  • Conventional Methods

  • Special Tools and Operations

  • Zone Isolation Methods

  • Model Study Result

  • Deviated Well Problem and Solutions

Consolidation

  • Formation Consolidation

  • Consolidation System Features

  • Well Preparation and Design Factor

  • Consolidated  Packs

  • Water Base Systems

  • Thermosetting Gravel Packs

Stable Arc Sand Control

  • The Stable Concept

  • Applying Stress for Sand Control

  • Conventional Cementing Limitations

  • Downhole Equipment

  • Type of Operation

Health, Safety and Environmental Consideration in Drilling Operation

  • Peraturan Perundangan tentang K3L

  • Pengauh Gas Beracun pada Operasi Pemboran

  • Pengaruh  Gas Beracun Bagi Kesehatan

  • H2S

  • Gas Detection Equipments

  • Noise level & exposure in Oil Gas Industry

  • Noise Mapping

DURATION

3 Day

FASILITY

Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, Flashdisk 8 Gb, Dinner, City Tour (Yogyakarta and Bandung) etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate & Photo.

——————————————————————————————————————————————————-

Here is a list of the related trainings we had held over the years: –

*  Advanced Casing Desing
*  Advanced Operation Geology
*  Advanced Pressure Concepts
*  Advanced Production and Through Casing Logging For Reservoir Monitoring
*  Advanced Seismic Data Processing
*  Advanced Turnaround, Shutdown and Outage Management
*  Analysis & Prediction of Natural Fracture System
*  Application of Structuural Geology in Seismic Interpretation
*  Applied EOR Technology and Project Management
*  Applied Petroleum Geostatistics
*  Applied Reservoir Engineering
*  AVO and Seismic Inversion
*  AVO, Attributes and Inversion: Principles and Applications
*  Basic & Advanced Budgeting and Forecasting in Oil & Gas
*  Basin Analysis
*  Carbonate Reservoir Geology
*  Casing and Tubing Stress Analysis
*  Casing Design
*  Clastic Exploration & Reservoir Sedimentology
*  Coalbed Methane and Shale Hydraulic Fracturing
*  Competency Management Systems in Oil & Gas
*  Completion : Equipment, Applications, Types, Installation
*  Completions Design School
*  Deepwater Completions School
*  Deepwater Drilling Operations
*  Deepwater Turbidites
*  Deepwater Well Engineering
*  Directional, Horizontal and Multilateral Drilling – Simulator Assisted
*  Drilling and Completion Fluids
*  Drilling Essentials for New Engineers and Non-Technical Professionals in Oil & Gas
*  E&P Business Simulation
*  Economic Aspects of Production Sharing Contracts
*  Effective Plan Turnaround Management
*  Engineering of Production Systems – Level 1
*  Engineering of Subsea Production Systems
*  EPCIC Contract Management & Essential Elements of International Contract Laws
*  Finance for Non-Finance Professional in Oil & Gas and Fiscal Systems
*  Flow Assurance for Offshore Field Development
*  FPSO & FLNG Design and Technology – Level 2
*  Fractured Reservoir Characterisation
*  Fundamentals of Seismic For Non-Geophysicists
*  Fundamentals Upstream Petroleum Economics and Risk Analysis
*  Gas & LNG Contracts Negotiation
*  Gas Processing
*  Gas-lift Design, Operation and Automation
*  Geopolitical Risk in Oil & Gas
*  Hazop Leadership
*  Heavy Oil Fields Development and Production
*  High Angle, Extended Reach Drilling (ERD) & Complex Wells
*  High Pressure High Temperature Completions
*  High Pressure High Temperature Well Engineering
*  How to interpret Multi-well Pressure Depth Plots from DST’s & RFT’s including Hydrodynamics
*  Human Competency & Capability Development in Oil & Gas
*  Image Log
*  Integrated Methods For Offshore LNG Transfer
*  Integrated Reservoir Studies
*  Integrated Sequence Stratigraphy
*  International Oil & Gas Executive Development Programme – IOGEDP 2013
*  International Petroleum Contracts and Practice in Negotiations
*  Interpreting and Managing Charterparty for Supply Vessels
*  Introduction to Exploration and Production for New Engineers and Non-Technical Professionals
*  Introduction to Offshore Drilling and Production Facilities
*  Introduction to Unconventional Gas
*  Leadership Managing and Team Dynamics in Partnerships in Oil & Gas
*  LNG Fundamentals
*  LNG Markets and Spot Trading
*  LNG Processing
*  Maintenance of Electrical Equipment in Oil & Gas Installations
*  Maintenance Planning and Scheduling
*  Management of International Commercial Arbitration Proceedings
*  Managing Complex Projects for Oil & Gas Professionals
*  Monitoring and Regulation of the Upstream Petroleum Sector
*  Negotiation Skills & Techniques  for Engineers
*  Oil and Gas Financial Modelling
*  Operations Geology
*  OSV Chartering & Charterparty Management With Essential Elements of Maritime Laws
*  Petroleum Economics
*  Petroleum Geology for Non-Geologist
*  Petroleum Risk Analysis & Portfolio Management
*  Primary & Secondary Cementing Technology
*  Process Hazard Assessment using the HAZOP Technique
*  Production Technology for Non-Production Engineers
*  Project Management for Oil & Gas Professionals
*  Prospect Maturation
*  Reliability Centered Maintenance Master Class
*  Reliability Engineering
*  Reservoir Engineering for other Technical Disciplines and Geosciences Professionals
*  Rigless Interventions : Slickline, Coiled Tubing, Hydraulic Workover and New Technologies
*  Risk Based Inspection
*  Root Cause Analysis
*  Rotating Equipment Maintenance and Reliability Excellence
*  Sand Control
*  Seismic Interpretation
*  Strategies For National Oil Companies
*  Stuck Pipe Prevention and Fishing
*  Subsea Control Systems & Umbilicals
*  Subsea Pipeline Engineering
*  Subsurface Mapping for Exploration and Development
*  Surface Production Operations
*  Technical Report Writing and Presentation Skills for Engineers and Technical Professionals
*  Training to Reduce Unscheduled Events – T.R.U.E
*  Understanding Well Control
*  Upstream Joint Venture Accounting, Analysis & Audit
*  Velocities, Migration, DMO and Velocity Model Building
*  Well Costings
*  Well Integrity Management
*  Well Intervention and Productivity School (WIPS)
*  Well Test Design and Analysis

Gas Dehydration System Training

Training Gas Dehydration System

DESKRIPSI

This course is designed to familiarize participants with the design and operation of dehydration equipment, with an emphasis on dehydration with triethylene glycol (TEG). Other dehydration methods, such as dry desiccant and refrigeration, are also covered. The course is designed for technical and operations personnel that design or operate dehydration facilities. An Excel spreadsheet calculation program is provided for determining the water content of sweet and sour natural gas, and for sizing most of the components of the TEG process train. A complete set of course notes and lunch are included.

COURSE OUTLINE

  • Natural Gas Fundamentals

  • Water Content of Natural Gas

  • Hydrates and Hydrate Control

  • Properties of Glycols

  • Components of Dehydration Process

  • Operation Guidelines

  • Troubleshooting

  • Environmental Considerations

  • Dry Desiccant Dehydration

  • Dehydration by Refrigeration, including IFPEXOL

  • Example Design Problems

Participants:

Engineers in Geologist and Geophysicist, Supervisor lapangan, Teknisi & Operator produksi

Instructor :

Ir. In Jumanda Kasdadi, MT/ Team

Safety and Risk Management in Oil and Gas

Training Safety and Risk Management in Oil and Gas

DESCRIPTION

The course serves as an extensive guide for delegates from management levels to onsite operational staff, and is aimed at a wider audience of stakeholders; oil and gas operators, terminal and tank operators, off-shore and ship operators, bunker providers and agents, port and terminal authorities, safety, security and environmental agencies, intermodal transport and logistics operators, shipping agents and freight forwarders, risk and safety consultants, risk and insurance professionals, students and academic researchers, etc. The course will include practical exercises and case study sessions to provide delegates with the necessary confidence and experience to work on the key issues for assessing and managing risks in oil and gas terminals.

WHO SHOULD ATTEND?

This training course covering key topics in Downstream was specifically designed for

  • Oil and Gas Safety Managers

  • Port and Terminal Managers

  • Ship and Offshore Managers

  • Storage and Tank Managers

  • Ship Bunkering and Station Managers

  • HSE Managers, Engineers and Supervisors

  • Safety and Security Managers

  • Shipping and Transport Managers

  • Logistics and Distribution Professionals

  • Terminal and Shipping Agents

  • Business Continuity Managers

  • Risk and Insurance Professionals

  • Transport Safety and Risk Consultants

  • Regulatory and Policy Experts

  • Academic and Research Faculty

  • Research and Postgraduate Students

COURSE CONTENT

  • Course Introduction

  • Safety & Risk Management Terminologies (safety terminologies, hazard, risk, incident, accident, safety work, etc)

  • Overview of Oil & Gas Processing & Facilities (wellhead, separation, pressure vessel, piping, pipeline, conditioning, etc)

  • Protection Concepts and Layer of Protection (BPCS, alarm system, safety instrumented system, etc)

  • Safety and Risk Management in Design Process (project phase, project safety analysis, etc)

  • Job Safety Analysis / JSA (source of hazards, HAZID, LFL/LEL, UFL/UFL, auto ignition temperature, etc)

  • Hazard and Operability Study / HAZOPS (Methodology, Team Coordination, HAZOPs quide word,  HAZOPs Worksheets, etc)

  • Hazards Related to Oil and Gas Industry (fire, explosions, slips, trips, falls, motor vehicle accidents, cofined space, etc)

  • Risk Management Process (planning, risk identification, risk assessment, risk control, etc)

  • Safety Instrumented System (SIS) and Risk Reduction(probability failure on demand, safety integrity level, etc)

  • Safety Management/Administration System (safety policy, safety standard, procedure, etc)

  • Methods of Risk Identification & Risk Assessment (what if, checklist,  Event Tree Analysis / ETA,  Fault Tree Analysis / FTA, etc)

  • Oil and Gas Production Facilities and Safety Requirements (safety requirement for wellhead, flowline, pressure vessel, etc)

INSTRUKTOR

Dr. Sudjati Rachmat, DEA / Team

  • Rachmat is a lecturer in Bandung since 1979 until now. Mr. Sudjati is an alumnus of the ITB graduating in 1977, then continued his education at diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. And in the years 1985 – 1987 he took courses Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Mr. Rachmat often becomes instructors in many petroleum-related training to companies throughout Indonesia, such as Pertamina, Chevron, Rhino LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Gas , PPTM Gas, PT Caltex Pacific Indonesia, Gulf, Arco, etc.. Training topics that he convey them is production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover , Numerical and Statistical Methods for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information Systems, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, and others. Mr. Sudjati did a lot of research in the field of Oil and Gas and has published and took seminar.

————————————————————————————————————————————————————————-

Bambang Santosa Budi, Ir, MT/ Team

Riwayat Pendidikan

  • Fakultas Teknik Perminyakan, UPN “Veteran” Yogyakarta, Sarjana Muda (BE), lulus 1984
  • Fakultas Teknik Perminyakan, UPN “Veteran” Yogyakarta, Sarjana (Ir), Lulus 1990
  • Program Studi Teknik Perminyakan, Institut Teknologi Bandung, Magister Teknik (MT), Lulus 2000

Judul- Judul Training yang pernah diampu :

  • Production Optimization For Artificial Lift Design
  • Production Optimization Using Nodal Design
  • Inhouse Training “Mud Design And Problem Solving” Karyawan Pertamina Drilling Service Dit Hulu
  • Basic Drilling And Completion Design
  • Underbalanced Technology Design
  • Petroleum For non Petroleum Engineer
  • Surface Production Facilities & Equipment
  • Basic Drilling Operation
  • Packer Specification, Operation & Mainetnance
  • Oil & Gas Production, Operation Facilities & Maintenanace
  • Drilling For Non Drilling Engineer
  • Wireline & Electrician Operation
  • Material Knowledge For Drilling & Production Operation
  • Introduction Oil & Gas Technical & Operation
  • Drilling, Well Completion & Production Operation
  • Casing, Cementing & Design
  • Underbalaced Drilling Technology
  • Well Service & Workover dengan Coil Tubing Technology
  • etc

————————————————————————————————————————————————————————-

Informasi seminar Oil and gas 2015 | Informasi Training Oil and gas 2015 | Jadwal Training terbaru Oil and gas 2015 | info seminar Oil and gas 2015 | Info training Oil and gas 2015 | Jadwal Seminar Oil and gas 2015 | Jadwal training Oil and gas 2015 | Jadwal Workshop Oil and gas 2015| Info training Oil and gas indonesia 2015 | Seminar Running Oil and gas 2015 | Training Oil and gas Running 2015 | In-House Training Oil and gas 2015 | Pelatihan Oil and gas Running 2015 | Training Pertambangan | Training Mineral, Energi dan Batu Bara | oil and gas training provider indonesia |oil and gas training jakarta |oil and gas training Yogyakarta | oil and gas training Bandung | oil and gas training Bali | oil and gas training Lombok |oil and gas training Batam | oil and gas training Kalimantan Provider Training di Yogyakarta, Provider Training di Jakarta,Provider Training di Surabaya, Provider Training di Balikpapan, Provider Training di Pontianak, Provider Training di Solo, Provider Training di Bandung, Provider Training di Bogor, Provider Training di Semarang, Provider Training di Bali, Provider Training di Lombok, Provider Training di Makassar.

Occupational Safety and Health Awareness Program

Occupational Safety and Health Awareness Program 

“Understand the importance of safety management at work and how to enhance it at the respective workplace.”

Introduction

This awareness program will give an overview of safety and health management at workplace and participants will understand the importance of safety management at work, their responsibilities and the necessary actions to enhance safety and health at their respective workplaces.

Course Objectives

At the end of the programme, participants should be able to:

  • Understand the basic legal requirements and compliance under OSHA 1994

  • Understand the responsibilities of employer, employee and safety committee under OSHA 1994

  • Understand the importance of the safety Committee, training and safety audit at workplace

  • Recognize work place safety hazards and develop take preventive measures

  • Understand the Regulations in Factories & Machinery Act

Course Outline

DAY 1

Morning Session

  • Introduction to OSHA 1994

  • Knowing DOSH-NOISH-PERKESO

  • Safety and Health Policy

Afternoon Session

  • Safety & Health Committee Functions

  • Hazards and Risk at Workplace

  • Hierarchy of Safety Control Measures

DAY 2

Morning Session

  • PPE: Personal Protective Equipment

  • Good Housekeeping

Afternoon Session

  • FMA: Factories & Machinery Act

    • CF Regulations

    • BOWEC Regulations

    • Noise Regulations

    • Mineral /Dust Regulations

    • Fencing Regulations

    • Steam Boiler Regulations

  • Practical Safety Audit

Target Audience:
Managers, Executives and Safety Committee

Occupational First Aid Skills and CPR

 “Knowledge in first aid makes the difference between life and death.”

Integrating Leading Measures In Safety Management

 Safety Management: Integrating Leading Measures In Safety Management

“Measuring injuries, costs, and incident rates are not a measure of safety – rather these are measures of our failures, shortcomings, and negative consequences.”

Introduction

Effective Safety Management can be much more complex than many people realize, especially in high-hazard industries. The progress of safety performance has been held back by traditional poor methods of measuring safety. It has been said “The measurement of Safety Performance is the greatest problem we face in safety today”. Measuring injuries, costs, and incident rates are not a measure of safety – rather these are measures of our failures, shortcomings, and negative consequences. They are measures of lack of safety. There are much better ways to measure safety that are positive, proactive, and drive improved performance.

This workshop will enable you to implement and sustain a safety process based on the latest knowledge about leading safety measures. Are you currently measuring the process of safety, or simply measuring the negative results that occur from a lack of safety excellence? You will learn the underlying principles for integrating leading measures into your safety management system, as well as best practice case studies and practical application tools. You will participate in relevant activities that allow participants to share knowledge and provide a “blueprint” for customizing your leading safety measures.

Course Objectives

Through focused dialogue, meaningful activities, and relevant case studies you will be able to:

  • Identify effective ways to “sell” leading measures to upper management

  • Distinguish between the roles that leading and lagging indicators play when designing safety measurement systems

  • Apply strategies for leading measures based on lessons learned from prominent case studies

  • Recognize and address common pitfalls of safety measures that can hinder your progress

  • Customize powerful measures for various safety management tools such as Job Hazard Analysis, Near-Miss Reporting Systems, and Risk Scoring Matrices.

  • Identify methods that enhance the impact of safety measures; the application of these methods can mean the difference between success and failure.

Course Outline

DAY 1

Introductions and Agenda

  • Introductions

  • Agenda & Expectations

Module 1: Leading Measures – Definitions & Benefits

  • What are Leading Measures?

  • ANSI Z10 Recommendations and Examples

  • 10 Criteria for Ideal Safety Measures

  • Benefits of Good Leading Measures

  • Selling Leading Measures to Upper Management

Activity: Measures vs. Drivers

Module 2: Limitations & Uses of Trailing Measures

  • Limitations of Trailing Indicators

  • Driving Analogy for Safety Performance

Activity: Best Practices for Trailing Measures?

Module 3: Prominent Case Studies

  • Compliance Case Study: The Big Four

  • Gulf Platform Case Study: The Importance of Focus

  • Large Brewery Case Study: Employee Engagement

  • Current Food Manufacturing Case Study: The Importance of Leadership

Activity: Avoiding Pitfalls to Effective Safety Measures

DAY 2

Module 4: Ten Steps for Developing Leading Measures

  • Tools for Prioritizing Measures

  • Guidelines to Customize Your Safety Measures

  • Measuring Safety Training

  • Safety Scorecards

Activity: Hypo Case or Live Case Analysis

  • Review the Case in detail

  • Provide Recommendations in small groups

  • Prioritize Measures in full class session

Module 5: Practical Applications – 3 Leading Metrics Tools

  • Job Hazard Analysis: Example 100 point JHA Metric

  • Measuring Near-Miss Reports, Ratios and Follow-up

  • Manuele’s Risk Score Formula

Activity: Journey to Safety Excellence

  • A Tool for Measuring Your Safety Program Maturity Levels

Module 6: Concepts to Enhance Safety Measure Effectiveness

  • What about Safety Incentives?

  • Activity: Success Stories & Lessons Learned

  • The Importance of Context for Measures

  • Execution with Excellence – The most Important Part?

Concluding Activities

  • Activity to Share One Thing You will Take Away and Use

  • Parting Conclusions

Target Audience:
Safety Professionals at all levels; managers and supervisors responsible for safety performance.

Incident Investigation, Reporting and Prevention

Incident Investigation, Reporting and Prevention Training

“Learn to identify the health and safety hazards and how to eliminate them, preventing similar accidents from occurring.”

Introduction

Accidents in the workplace, no matter how serious or minor, should be investigated. Investigations can determine how and why these failures occur and can offer suggestions on how to mitigate them in the future. By using the information gathered during the investigation, employers can identify the health and safety hazards and how to eliminate them, preventing similar accidents from occurring.

Proper accident investigation and reporting is all about learning from experience in order to significantly reduce the risks of accidents happening again. Investigations should be conducted with prevention in mind as opposed to trying to place blame. The focus of the investigation should be on the cause and finding the solution for future prevention. Accidents are complex and most often adversely affect the completion of a task. Accidents may have several events occur that can be considered the cause. Despite their complexity, most accidents are preventable by eliminating the cause.

Investigations determine not only what happened, but how and why. Investigations will reveal a sequence of events that led to the accident and offer suggestions as to how to change the sequence to prevent a reoccurrence. It is critical to determine the ROOT CAUSE of an incident to see if similar circumstances exist elsewhere in the workplace. These must be eliminated. An accident investigation process should be defined: How will the notification process occur? What types of accidents will be investigated? Who is responsible and included in the investigation? How will corrective actions be tracked? How will the process be documented?

Course Objectives

By attending this 2 days program, you will walk away with powerful skills and techniques to:

  • Gain a practical insight into why accidents occur
  • Find out the investigation and analysis techniques
  • Identify the underlying “root” causes of incidents and accidents
  • Implement correction actions to prevent the occurrence of similar future events
  • Grasp the goals of an accident investigation
  • Secure an incident or accident scene
  • Understand the importance of investigation interviews
  • Assist in an accident investigation
  • Gain a practical insight into why accidents occur or re-occur
  • Learn the proven investigation and analysis techniques
  • Look out for the importance of warning signs in accident prevention
  • Implement correction actions to prevent the occurrence of similar future events

Course Outline

DAY 1

Course Commences

  • Introduction
  • Review of agenda and participants’ expectations and key questions

The Principles of Incident Investigation

  • Why an organization needs to be aware of the nature/definition of incident
    • What is an incident
    • Separating event and outcome
    • The “near miss”
  • The reasons for investigating incidents from various aspects
  • The causes of incidents
    • Interacting factors in incident causation
    • The complexity of incident causation
    • Unsafe conditions or practices in the workplace should be identified before someone gets hurt
    • Incident investigations is method to remove risk from the workplace
  • The relationship between risk assessment and incident investigation

Managing Accidents and Investigation Techniques

  • Immediate post – accident action
  • Emergency services
  • Notifying the authorities and others
  • Reporting and recording incidents
  • Collecting physical evidence
  • Identifying and interviewing witnesses
  • Obtaining evidence from other sources
  • Resolving conflicts in evidence

Conducting Interview Exercise

Human Factors in Incident Investigation

  • The HSE’s definition of human factors
  • Human behaviour as one of the essential factors in the lead up to an accident
  • Human Error and types of violation
  • Case Studies involving human error
  • Team Exercise: Selection of Interview

Open forum on Day 1 Topics

  • Open forum and review of participants’ expectations and key questions

DAY 2

Incident Causation Theories

  • Heinrich’s Sequence
    • The Domino Model
    • Bird’s Accident Model
  • Fault Tree Analysis (FTA)

Tripod Beta and Bow-Ties

Case Study/ Exercise/Discussion

What Went Wrong

  • Bhopal
  • Herald of Free Enterprise
  • King’s Cross

The Accident Report

  • The objectives of the accident investigation report
  • The purpose of an accident investigation report
    • Internal Purposes
    • External Purposes
  • Who should prepare the accident investigation report?
  • Analyzing and presenting the data
  • Common errors in report writing
  • Recommendations in reports

Who Should Attend:

This course is useful for all levels of experience. It is for those who require a practical insight into the process of investigating incident & how to prepare the proper reporting system to the management. This course can be attended by Directors, General Managers, Senior Managers, Managers & Executive who responsible in Health & Safety. 

Hazard Identification, Risk Assessment and Risk Control (HIRARC)

Introduction

This is a 2-Day Hazard Identification, Risk Assessment and Risk Control (HIRARC) training course for companies with employees who expose to hazardous working environment. To request for in-house training, click on the Request for In-house Training link as displayed above for quotation. For more information about this course, feel free to contact the training provider as shown above. If the public program is available, you can register online by clicking on the Register for Public Training link. If the link is disabled, it simply means it has yet to be available for public. You can contact the training provider for further inquiry.

Course Objectives

  • To identify types of Hazard in workplace
  • To make risk assessments
  • To suggest Risk Controls to organization
  • To implement Risk Controls
  • To review Risk Controls
  • To discover techniques for evaluating and managing significant aspects/ risks
  • To develop an evaluation methodology
  • To recommend the appropriate control measures in managing risk in workplace
  • To explore how Hazard effect Management Process (HEMP) concept and BOWTIE methodology where Control and Recovery Measures are distinctly explained and any errors on hazard identification will be averted

Course Outline

DAY 1

Basic Concepts: What is Risk

Planning and Conducting of HIRARC

  • Purpose of HIRARC
  • Process of HIRARC
    • Classify Work Activity
    • Hazard Identifications
      • Health Hazards
      • Safety hazards
      • Environmental Hazards
      • Hazard Identification Techniques
      • The Hazard Identification & Assessment Methodology
    • Analyze & Estimate Risk
      • Probability of an Occurrence
      • Severity of Consequences
      • Risk Assessment
        • Type of Risks
        • Risk Assessment Metric
        • Decision for Risk Control Action

DAY 2

Control

  • Selecting a Suitable Control
  • Types of Control:
    • Source of the Hazard
    • Engineering control
    • Administrative Controls
    • Personal Protective Equipment
  • Monitoring Controls
  • Safe Work Procedures
  • Personal Protective Equipment

Documenting HIRARC

  • Responsibility & Accountability
  • Documenting Process

Safety Management : Enhancing Safety Performance with Behavioral Safety: Current Trends in BBS

Safety Management : Enhancing Safety Performance with Behavioral Safety: Current Trends in BBS

“Understand why Behavior-Based Safety works and how to tailor it for your organization for greater safety performance.”

Introduction

This workshop will inform you about the psychology, strategies, and practical applications for Behavior-Based Safety (BBS). You will better understand why BBS works, and how to tailor it for your organization. Topics include:

  • A history of BBS and how it has evolved

  • BBS Tools for performance improvement

  • Why BBS can work well; Why BBS sometimes doesn’t work well

  • BBS Case Studies and Lessons Learned

  • How to Identify & Remove Barriers to BBS

  • Safety Coaching: The heart of the BBS process

  • Current Trends in BBS including Self-Observations, Do-It-Yourself Strategies, and Lean BBS

  • Common Myths and the truth about BBS

  • How to Measure BBS progress

  • How to Sustain BBS efforts

Course Objectives

If your organization is interested in implementing a BBS process, you will understand how the process works and what makes it successful. The case studies will show you how different organizations have designed BBS structures to reduce injuries and to develop their safety culture.

Specifically, you can expect the following benefits from attending this workshop:

  • How to develop safety coaching observation skills

  • Enhancing your safety feedback skills

  • Greater understanding and preparation to overcome barriers to BBS

  • Learn from other companies successes and failures

  • Ability to apply the latest innovations in BBS

Course Outline

DAY 1

Course Introduction

  • Welcome, Participant & Instructor Introductions
  • Course Objectives
  • A Brief History of how BBS has evolved
  • Case Study: The Original BBS Experiment & Lessons Learned
  • What Are the Basic Purposes for BBS?
    • Develop Your Safety Culture *Safety Culture Activity
    • Impact Safety Performance

Seven Behavioral Principles to Improve Performance

  • ABC Analysis as a Safety Improvement Tool
  • *ABC Analysis Activity Case Study: Petrochemical Hydrogen Cyanide

What makes BBS Effective?

  • Strategies for Success
  • Why Does BBS Work When Done Well?
  • Why Does BBS Sometimes Not Work Very Well?
  • Case Studies

Current Case Study

  • Pulling Concepts Together for Advanced BBS
  • Large Multinational Manufacturing Co.

DAY 2

BBS Steps that Lead to Safety Excellence

How to Identify and Remove Barriers to Successful BBS

Safety Coaching

  • Developing Observation Skills
  • How to Develop Feedback & Dialog Skills
    • Guidelines for Good Feedback Skills
    • Feedback Applications under Various Conditions
    • Activity: Developing Feedback Skills for BBS

Current Trends in BBS

  • Effectively Using Behavioral Data
  • Evolving Issues in Making BBS Most Effective
    • Case Study: Heavy Manufacturing Plant, MW USA
  • Evolving Concepts for BBS
    • DIY Case Study: International Furniture/Electronics Co
  • Distinctions Between Personal Safety & Process Safety *BP Texas City

How to Maximize Your Behavioral Safety Measures

  • Multiple Case Studies (Oil, Brewery, Steel)

Sustaining BBS Performance

  • Execute with Excellence
  • Importance of the Safety Scoreboard

Enhancing Safety Performance with BBS

  • Understanding some Common Myths
  • The way forward

Take-Away Activity

  • Conclusions

Chemical Safety Procedures: Chemical Spillage and Discharge Response Procedures

 Chemical Safety Procedures: Chemical Spillage & Discharge Response Procedures

“Get trained to react effectively and safely in the event of chemicals spillage or discharge.”

Introduction

Each Department which stores or handles hazardous chemicals or toxic chemicals must have in place emergency plans and procedures for dealing with the spillage of these chemicals. Employees must be trained to react effectively and safely in the event of chemicals spillage or discharge.

Course Objectives

Upon completion of the program participants will be able to:

  • Have basic understanding of chemical Safety

  • Know the roles and responsibilities of Response Team & Individual

  • Understand the chemical emergency response procedures

  • Understand and able to practice chemical clean up procedures

  • Develop in house emergency response plan

  • Improve on the skill of chemical spillage response procedures

Course Outline

D A Y  1

1. Introduction to Chemical Safety & Roles and Responsibilities of:

  • Response team

  • Individual

2. Chemical Emergency Response Procedures

  • Immediate Action When Spillage Occurs

  • Make Decision to Evacuate or Control

  • Spillage

  • Steps to Controls The Spillage

  • Liquid Spill Response

  • Powder Spill Response

D A Y  2

3. Chemical Spill & Clean up Procedures

  • Introduction

  • Scope and Application

  • Procedures

  • General Guideline for Cleaning up

  • Chemical Spills

  • Types of Spillage Kits

  • Safe Waste Disposal After Spillage

4. Developing a Spill Response Plan

  • MSDS

  • Appropriate Spill Control Materials

  • PPE

  • Sitting of Spill Control Materials

  • Develop Spill Control Plan

  • Discussion

5. Spill Response Plan- Practical/Case Study

Methodology

Theoretical sessions shall be followed by practical workshop, group discussion, presentation and/or structured exercise, as well as questions and answers session. Course material shall be professionally designed for ease of understanding and application.

Training Sertifikasi Auditor SMK3

Training Sertifikasi Auditor Sistem Manajemen K3

21 – 24 Februari 2015  (Running)

Siapa yang Perlu Menghadiri Training Auditor SMK3 Sertifikasi ini?

Yang perlu menghadiri training auditor SMK3 sertifikasi BNSP ini adalah HSE Dept, Operation/Production Manager, HRD Manager, Training and Development Manager, Management Representative (MR), Superintendent/Supervisor, Tim penerapan SMK3 PP No.50: 2012 / OHSAS 18001: 2007, dan semua yang terkait dalam pengembangan HSE / Keselamatan dan Kesehatan Kerja (K3) di perusahaan

Tujuan dan Manfaat

Setelah mengikuti Training SMK3 ini, diharapkan peserta akan dapat

  1. Peserta  memahami SMK3 berdasarkan PP No.50 tahun 2012 dan OHSAS 18001:2007
  2. Peserta memahami metoda identifikasi dan pengkajian resiko bahaya k3
  3. Peserta memahami Proses Penyusunan Tujuan, Sasaran dan program K3
  4. Mampu melakukan gap analysis penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di perusahaan
  5. Mampu menyusun sistem dokumentasi K3: Prosedur / SOP dan Instruksi Kerja
  6. Menyediakan, mengimplementasikan dan memelihara Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3)

Pokok Bahasan
1. Kebijakan Pengawas K3
2. Kebijakan SMK3
3. Prinsip Dasar SMK3
4. Tugas dan Fungsi Auditor SMK3
5. Wewenang, kewajiban dan jenjang karier Auditor SMK3
6. Badan Audit SMK3
7. Mekanisme Audit SMK3
8. Metode dan Teknik Audit SMK3
9. Instrumen Audit SMK3
10. Laporan Audit SMK3
11. Rencana Tahunan Audit (RTA)
12. Hubungan Fungsional Auditor SMK3 dengan Pengawas Ketenagakerjaan dan Ahli K3

Durasi
Pukul 08.00 – 17.00 WIB

Fasilitas
Modul / Handout, CD materi, Alat tulis, Tas, Sertifikat, SK Penunjukan sebagai Auditor SMK3 dari KEMENAKER RI, Coffee Break & Lunch.
* Penyelenggara tidak menyediakan penginapan

Instruktur
Training ini akan disampaikan oleh Instruktur ahli K3 dari KEMENAKER RI dan Praktisi ahli K3 dari kalangan industri

Sertifikat
Setiap peserta yang telah mengikuti training ini akan mendapatkan Sertifikat dari Kementerian Tenaga Kerja RI dan khusus bagi peserta yang pernah melakukan audit K3 di perusahaannya akan mendapatkan SK Penunjukan sebagai Auditor SMK3 dari Kementerian Tenaga Kerja RI.

Tempat
Gedung JBN Amazing Hall
Jl. Yos Sudarso No. 21 Kridosono, Yogyakarta


* Pelunasan paling lambat 16 Februari 2015

Bagi pendaftar yang melakukan pelunasan melewati batas tanggal yang kami tentukan, akan dikenakan biaya tambahan sebesar Rp. 250.000,-/peserta

Persyaratan Peserta
1. Calon peserta harus sudah pernah mengikuti Training Ahli K3 Umum
2. Melampirkan copy sertifikat Ahli K3 Umum beserta SK Penunjukan
3. Melampirkan copy ijazah terakhir (minimal D3)
4. Foto berwarna 4×6 sebanyak 2 lembar
5. Setelah mengikuti Training Auditor SMK3 ini, peserta akan mendapatkan sertifikat dari KEMENAKER RI dan tidak termasuk SK Penunjukkan, dan jika peserta/perusahaan tersebut membutuhkan SK Penunjukan Auditor SMK3 maka harus melampirkan surat pernyataan dari Perusahaan bahwa peserta tersebut sudah pernah melakukan audit K3 di perusahaannya dan kemudian SK Penunjukan bisa langsung diurus langsung oleh peserta ke KEMENAKER RI atau dengan bantuan kami.
6. Bagi Anda yang berada di luar kota Yogyakarta WAJIB untuk mengkonfirmasi kepastian training via SMS atau telepon SEBELUM mentransfer biaya training dan membeli tiket perjalanan.

Training Sertifikasi Ahli K3 Umum (DEPNAKERTRANS RI)

Sertifikasi Ahli K3 Umum (DEPNAKERTRANS RI) – Running

18 – 30 Mei 2015 (dijamin murah dari yang lain untuk yang tanggal ini) Kuota Terbatas

TUJUAN PELATIHAN

Pelatihan ini dirancang untuk memenuhi peraturan perundangan yang telah disyaratkan, bahwa sebagaimana pelaksana ketentuan pasal 1 ayat (6) dan pasal 5 ayat (2) Undang-undang No. 1 tahun 1970 tentang keselamatan kerja, perlu adanya keberadaan seorang ahli keselamatan dan kesehatan kerja di tempat kerja.

MANFAAT PELATIHAN

Setelah mengikuti pelatihan peserta diharapkan mampu :

  1. Melakukan identifikasi, evaluasi dan pengendalian masalah-masalah keselamatan dan kesehatan kerja di tempat kerja sesuai dengan bidang tugasnya
  2. Berperan aktif sebagai sekretaris P2K3 di perusahaan
  3. Mengembangkan dan melaksanakan program K3 pro-aktif
  4. Mencari dan menemukan bahaya-bahaya potensial dalam proses produksi
  5. Mengendalikan bahaya-bahaya potensial dan meniadikan atau memperkecil resikonya

PERSYARATAN PESERTA

  1. Berpendidikan sarjana, sarjana muda atau sederajat dengan ketentuan sebagai berikut;
    • Sarjana dengan pengalaman kerja sesuai dengan bidang keahliannya sekurang-kurangnya 2 tahun
    • Sarjana Muda atau sederajat dengan pengalaman kerja sesuai dengan bidang keahliannya sekurang-kurangnya 4 tahun;
  2. Berbadan sehat
  3. Berkelakuan Baik
  4. Bekerja penuh di instansi yang bersangkutan
  5. Lulus seleksi dari Tim Penilai

Untuk keperluan pembuatan sertifikat dan surat penunjukan sebagai Ahli K3 Umum, maka para peserta diharuskan menyerahkan:

  1. Photo berwarna ukuran 4×6 sebanyak 2 lembar, dan ukuran 3×4 sebanyak 2 lembar
  2. Fotocopy ijazah terakhir sebanyak 2 lembar
  3. Foto Copy KTP masih berlaku
  4. Surat Keterangan sehat dari Dokter terbaru
  5. Surat pengalaman kerja dari perusahaan yang bersangkutan sesuai dengan sertifikasi yang akan di ikuti.

MATERI PELATIHAN

  1. Kebijakan K3, Prinsip Dasar K3
  2. Undang Undang No. 1 tahun 1970 tentang Keselamatan Kerja
  3. Panitia Pembina Keselamatan dan Kesehatan Kerja
  4. Sistem Manajemen K3
  5. Audit Sistem Manajemen K3
  6. Manajemen Resiko
  7. Pengawasan K3 Pesawat Uap
  8. Pengawasan K3 Bejana Tekan
  9. Pengawasan K3 Mekanik
  10. Pengawasan Lingkungan Kerja
  11. Pengawasan K3 Konstruksi Bangunan
  12. Pengawasan K3 Listrik
  13. Pengawasan K3 Penanggulangan Kebakaran
  14. Analisa Kecelakaan Kerja
  15. Statistik dan Laporan Kecelakaan
  16. Praktek Kerja Lapangan
  17. Seminar
  18. Pre Test & Post Test

 

SERTIFIKAT

Setelah sukses mengikuti pelatihan ini peserta akan diberikan sertifikat dan surat penunjukan ahli K3 ditempat kerja yang akan dikeluarkan Departemen Tenaga KerjaR.I.

*Training akan dilaksanakan apabila kuota minimum 15 peserta sudah terpenuhi
*Informasi jumlah peserta dapat melalui SMS ke 082323265005 – 085724595005 / email: trainingcenterindo@gmail.com

SHE Auditing – A Management Systems Approach

SHE Auditing – A Management Systems Approach Training

Training Februari 2015, Training Maret 2015, Training April 2015, Training Mei 2015, Training Juni 2015, Training Juli 2015, Training Agustus 2015, Training September 2015, Training Oktober 2015, Training November 2015, Training Desember 2015 (Waktu dan Tempat Tentative or as Request)

You will learn “SHE Auditing – A Management Systems Approach Training ”

Participants will learn how to:

  • Participate effectively in an audit or review team in line with the standards of the auditing profession
  • Relate audit to the essential principles of Corporate Governance, Risk Management, Business Control and Management Systems
  • Add value for senior management from the auditing process
  • Demonstrate the skills necessary to conduct an effective audit, including: familiarising with the auditee’s business environment and objectives, developing a risk-based work plan, effective interviewing, reviewing and testing techniques, recording, analysing and assessing audit findings, evaluating the auditee’s HSE MS, summarising, presenting and reporting at high level the audit results to management

Course Content “SHE Auditing – A Management Systems Approach Training”

  • Learning and Development: Risk management and business control
  • HSE-MS Auditing
  • Planning the audit
  • Review and test processes
  • Effective interviewing for information
  • Legal aspects relevant to auditing
  • Findings and recommendations
  • Audit conclusion
  • Audit interviews
  • Gathering objective evidence
  • Preparing the audit report
  • Audit team meetings
  • Audit report and follow-up

SHE Auditing – A Management Systems Approach, Designed For :

The course is designed to introduce new and experienced auditors to a dynamic risk-based approach for assessing the effectiveness of any HSE-MS, including those based upon ISO 14001 and/or OHSAS 18001. It has also proven extremely beneficial for preparing technically competent line managers and supervisors prior to secondment to a team auditing an HSE-MS in any environment.